caron 6540-1 Instructions for use

MODEL 6540-1
INST-PM-6540-1-UVA

Revision Log
Revisions
Description
Letter
Date
A
12-06-2016
Initial release.
B
04-04-2018
New cover.

INST-PM-6540-1-UVA Rev B 04/04/2018
Parts Required: (6) Lamps
Tools Required: None
Parts included in Preventative Maintenance Kit for Model 6540-1 are shown below.
Note: Lamps may be black or white depending on kit Revision Level.
Note: Photos may have a different appearance depending on chamber options.
1. Turn off chamber and unplug power cord.
INSTRUCTIONS FOR REPLACING UVA LAMPS IN MODEL 6540-1
REPLACING LAMPS
Disconnect electrical power before removing light banks.
Lamps

INST-PM-6540-1-UVA Rev B 04/04/2018
2. Slide top light bank shelf out of chamber as shown below.
3. Remove light bank shelf and place lamp side up on flat surface as shown below.
4. Remove and discard old lamp by rotating lamp ¼ turn and lifting out of lamp
sockets. Repeat for each lamp to be replaced.
5. Insert new lamp ends into lamp sockets and rotate ¼ turn. Repeat for each lamp
to be replaced.
Top Light Bank Shelf

INST-PM-6540-1-UVA Rev B 04/04/2018
6. Slide light bank shelf into chamber and press firmly to seat rear connector as
shown below.
7. Plug in power cord and turn on chamber.
8. Reset lamp life hours by pressing Setup Menu button on right side of MAIN
SCREEN as shown below.
Light Bank Shelf
Setup Menu Button
Press Here to Seat Rear Connector

INST-PM-6540-1-UVA Rev B 04/04/2018
9. Press LAMP LIFE button as shown below.
10.Press RESET UVA LAMP HOURS button as shown below.
11.Press Check Mark button as shown below.
RESET UVA LAMP HOURS Button
Check Mark Button
Button
LAMP LIFE Button

INST-PM-6540-1-UVA Rev B 04/04/2018
12.Press Check Mark button to confirm selection as shown below.
13.Press Check Mark button to return to MAIN SCREEN as shown below.
Check Mark Button
Button
Check Mark Button
Button