CasaTunes CT-4S User manual

Included Items
Audio Cables
Qty 4
Power Cable
Qty 2
Quick Start Guide for 6 Room Music System
Network Cable Qty 1
Serial Cable Qty 1
Enable all of the music services you are interested in.
Some music services require setting up SqueezeBox. Follow the directions in
CasaSetup.
Some music services require paid accounts, as noted in CasaSetup.
Now, name all of your sources and rooms and set your Time Zone and Update
settings. Check the Hide check box for any Sources or Rooms not used. Click on
Advanced Settings and use the Project Information page to create a backup of
the project.
Need Help?
Control
Use our control apps.
OR
Go to http://musicBox/CasaTunes on any
PC, or http://musicBox.local/CasaTunes on
any Mac connected to the network
Check out the videos at
http://www.YouTube.com/CasaTunes
Check out our Tech Notes at
http://www.CasaTunes.com/guides
For live help, email us at
[e-mail] or phone us at
888-855-2272
CasaTunes Setup
(Cont)
Follow these steps to install your CasaTunes
music system for up to 6 rooms.
Keypad Controls and Keypad Hub Connection Plate
SEE IMPORTANT NOTE ON NEXT PAGE!

Use Audio Cables
to connect
stream outputs
to amplifier
To Speakers
Connect the
Components
Connect serial
control cable.
From
external devices
(tuners, cable
boxes, etc.)
Connect to LAN
and Power
Network Cable
Power Cable
CasaTunes Setup
Open any browser on the
LAN and go to CasaSetup:
Turn on the system at this time.
PC: http://musicBox/CasaSetup
Mac: http://musicBox.local/CasaSetup
Use optical
cable for 5th
stream
(optional,
supplied by
customer)
Power Cable
Click on Sources. “Source inputs” are the inputs on the back of the amplifier. They are
in the same order as the sources listed in the Sources page of CasaSetup.
For any source input that CasaTunes supplies a music stream, pick CasaTunes Media
Player as the Source
type and set the Player
Settings to match the
audio jack you are us-
ing for that source in-
put. For example, if
you connect the first
CasaTunes stream to
the first Source input, click on Player 1 and set the settings as shown here. You can
assign any CasaTunes Media Player to any of the Source inputs.
For other source inputs, such as the audio from a set top box, pick “Unknown” as the
Source type. Hide sources that are not used.
Continued on back....
NOTE: Make sure the controller switch on the back of the
amplifier is set correctly:
Master = Zones 1-6
Slave 1 = Zones 7-12
Slave 2 = Zones 13-18
NOTE: Do not plug a live internet cable into the Keypad Jack!