CASE CONSTRUCTION 821G User manual

1/2 SERVICE MANUAL
821G
921G
Tier 2
Wheel Loader
Part number 48083741
English
July 2018
© 2018 CNH Industrial Italia S.p.A. All Rights Reserved.
821G
921G
Wheel Loader
Part number 48083741
SERVICE MANUAL

Thanks very much for your reading,
Want to get more information,
Please click here, Then get the complete
manual
NOTE:
If there is no response to click on the link above,
please download the PDF document first, and then
click on it.
Have any questions please write to me:
[e-mail]

SERVICEMANUAL
821GZBAR-EH,NEWCABTIER2
921GZBAR-EH,NEWCABTIER2
48083741_EN31/07/2018EN

Contents
INTRODUCTION
Engine.......................................................................................10
[10.001]Engineandcrankcase.............................................................10.1
[10.202]Aircleanersandlines..............................................................10.2
[10.400]Enginecoolingsystem.............................................................10.3
[10.414]Fananddrive......................................................................10.4
[10.310]Aftercooler..........................................................................10.5
[10.304]Enginelubricationsystem..........................................................10.6
Transmission..............................................................................21
[21.113]Powershifttransmission............................................................21.1
[21.155]Powershifttransmissioninternalcomponents......................................21.2
[21.700]Torqueconverter...................................................................21.3
Four-WheelDrive(4WD)system..................................................23
[23.314]Driveshaft..........................................................................23.1
Frontaxlesystem.......................................................................25
[25.100]Poweredfrontaxle.................................................................25.1
[25.102]Frontbevelgearsetanddifferential...............................................25.2
[25.108]Finaldrivehub,steeringknuckles,andshafts.....................................25.3
Rearaxlesystem........................................................................27
[27.100]Poweredrearaxle..................................................................27.1
[27.106]Rearbevelgearsetanddifferential................................................27.2
[27.120]Planetaryandnaldrives..........................................................27.3
Brakesandcontrols....................................................................33
[33.202]Hydraulicservicebrakes...........................................................33.1
[33.110]Parkingbrakeorparkinglock......................................................33.2
Hydraulicsystems.......................................................................35
48083741_EN31/07/2018

[35.000]Hydraulicsystems..................................................................35.1
[35.300]Reservoir,cooler,andlters........................................................35.2
[35.106]Variabledisplacementpump.......................................................35.3
[35.359]Maincontrolvalve..................................................................35.4
[35.357]Pilotsystem........................................................................35.5
[35.204]Remotecontrolvalves.............................................................35.6
[35.752]Hydraulicfandrivecoolingsystem.................................................35.7
[35.701]Frontloaderarmhydraulicsystem.................................................35.8
[35.723]Frontloaderbuckethydraulicsystem..............................................35.9
[35.734]Toolquickcouplerhydraulicsystem.............................................35.10
Framesandballasting.................................................................39
[39.100]Frame..............................................................................39.1
Steering.....................................................................................41
[41.101]Steeringcontrol....................................................................41.1
[41.200]Hydrauliccontrolcomponents......................................................41.2
[41.216]Cylinders...........................................................................41.3
[41.910]Auxiliarysteering...................................................................41.4
Wheels......................................................................................44
[44.511]Frontwheels........................................................................44.1
[44.520]Rearwheels........................................................................44.2
Cabclimatecontrol.....................................................................50
[50.100]Heating.............................................................................50.1
[50.200]Airconditioning.....................................................................50.2
Electricalsystems.......................................................................55
[55.100]Harnessesandconnectors.........................................................55.1
[55.301]Alternator...........................................................................55.2
[55.302]Battery..............................................................................55.3
[55.512]Cabcontrols........................................................................55.4
48083741_EN31/07/2018

[55.050]Heating,Ventilation,andAir-Conditioning(HVAC)controlsystem.................55.5
[55.415]Loaderarmandbucketcontrolsystem............................................55.6
[55.530]Camera.............................................................................55.7
[55.DTC]FAULTCODES....................................................................55.8
Frontloaderandbucket...............................................................82
[82.100]Arm.................................................................................82.1
[82.300]Bucket..............................................................................82.2
Platform,cab,bodywork,anddecals.............................................90
[90.150]Cab.................................................................................90.1
[90.120]Mechanically-adjustedoperatorseat...............................................90.2
[90.124]Pneumatically-adjustedoperatorseat..............................................90.3
[90.105]Machineshieldsandguards.......................................................90.4
48083741_EN31/07/2018

INTRODUCTION
48083741_EN31/07/2018
1

Contents
INTRODUCTION
Safetyrules.....................................................................................3
Personalsafety.................................................................................4
Basicinstructions-Importantnoticeregardingequipmentservicing.........................13
Basicinstructions-Howtousethemaintenancestandardandprecautions.................14
Basicinstructions-Precautionfordisassemblyandassembly...............................16
Basicinstructions-Electricalequipmentprecautions........................................18
Torque-Minimumtighteningtorquesfornormalassembly...................................19
Consumables.................................................................................21
Consumables-BiodieselFuel................................................................23
Hydrauliccontamination......................................................................24
Productidentication..........................................................................25
Productidentication..........................................................................26
48083741_EN31/07/2018
2

INTRODUCTION
Safetyrules
Personalsafety
Thisisthesafetyalertsymbol.Itisusedtoalertyoutopotentialpersonalinjuryhazards.Obeyall
safetymessagesthatfollowthissymboltoavoidpossibledeathorinjury.
ThroughoutthismanualyouwillndthesignalwordsDANGER,WARNING,andCAUTIONfollowedbyspecialin-
structions.Theseprecautionsareintendedforthepersonalsafetyofyouandthoseworkingwithyou.
Readandunderstandallthesafetymessagesinthismanualbeforeyouoperateorservicethemachine.
DANGERindicatesahazardoussituationthat,ifnotavoided,willresultindeathorseriousinjury.
WARNINGindicatesahazardoussituationthat,ifnotavoided,couldresultindeathorseriousinjury.
CAUTIONindicatesahazardoussituationthat,ifnotavoided,couldresultinminorormoderateinjury.
FAILURETOFOLLOWDANGER,WARNING,ANDCAUTIONMESSAGESCOULDRESULT
INDEATHORSERIOUSINJURY .
Machinesafety
NOTICE:Noticeindicatesasituationthat,ifnotavoided,couldresultinmachineorpropertydamage.
ThroughoutthismanualyouwillndthesignalwordNoticefollowedbyspecialinstructionstopreventmachineor
propertydamage.ThewordNoticeisusedtoaddresspracticesnotrelatedtopersonalsafety.
Information
NOTE:Noteindicatesadditionalinformationthatclariessteps,procedures,orotherinformationinthismanual.
ThroughoutthismanualyouwillndthewordNotefollowedbyadditionalinformationaboutastep,procedure,or
otherinformationinthemanual.ThewordNoteisnotintendedtoaddresspersonalsafetyorpropertydamage.
48083741_EN31/07/2018
3

INTRODUCTION
Personalsafety
CarefullyreadthisManualbeforeproceedingwithmain-
tenance,repairs,refuellingorothermachineoperations.
Repairshavetobecarriedoutonlybyauthorizedandin-
structedstaff;specicprecautionshavetobetakenwhen
grinding,weldingorwhenusingmalletsorheavyham-
mers.
Non-authorizedpersonsarenotallowedtorepairorcarry
outmaintenanceonthismachine.Donotcarryoutany
workontheequipmentwithoutpriorauthorization.
Askyouremployeraboutthesafetyinstructionsinforce
andsafetyequipment.
Nobodyshouldbeallowedinthecabduringmachine
maintenanceunlessheisaqualiedoperatorhelping
withthemaintenancework.
Ifitisnecessarytomovetheequipmenttocarryoutre-
pairsormaintenance,donotliftorlowertheequipment
fromanyotherpositionthantheoperator’sseat.
TULI12WEX2004AA1
Nevercarryoutanyoperationonthemachinewhenthe
engineisrunning,exceptwhenspecicallyindicated.
Stoptheengineandensurethatallpressureisrelieved
fromhydrauliccircuitsbeforeremovingcaps,covers,
valves,etc.
Allrepairandmaintenanceoperationsshouldbecarried
outwiththegreatestcareandattention.
Servicestairsandplatformsusedinaworkshoporinthe
eldshouldbebuiltincompliancewiththesafetyrulesin
force.
Anyfunctionaldisorders,especiallythoseaffectingthe
safetyofthemachine,shouldthereforeberectiedim-
mediately.
DANGER
Unexpectedmovement!
Makesureparkingbrakeisapplied.Secure
machinewithwheelchocks.
Failuretocomplywillresultindeathorserious
injury.D0013A
TULI12WEX2005AA2
Beforeperforminganyworkonthemachine,attacha
maintenanceinprogresstag.Thistagcanbeappliedon
theleft-handcontrollever,safetyleverorcabdoor.
48083741_EN31/07/2018
4

INTRODUCTION
Emergency
Bepreparedforemergencies.Alwayskeepareextin-
guisherandrstaidkitreadilyavailable.Ensurethatthe
reextinguisherisservicedinaccordancewiththeman-
ufacturer’sinstructions.
SMIL12WEX0174AA3
Equipment
Wearclosettingclothingandsafetyequipmentappropri-
ateforthejob:
•Safetyhelmet
•Safetyshoes
•Heavygloves
•Reectiveclothing
•Wetweatherclothing
Ifworkingconditionsrequire,thefollowingpersonalsafety
equipmentshouldbeonhand:
•Respirators(ordustproofmasks)
•Earplugsoracousticearsprotections
•Goggleswithlateralshieldormasksforeyeprotection
Donotwearrings,wristwatches,jewelry,unbuttonedor
appingclothingsuchasties,tornclothes,scarves,open
jacketsorshirtswithopenzipswhichcouldgetcaughtinto
movingparts.
TULI12WEX2008AA4
Engine-Radiator
Neverleavetheenginerunninginenclosedspaceswith-
outproperventilationwhichisabletoevacuatetoxicex-
haustgases-Keeptheexhaustmanifoldandtubefree
fromcombustiblematerials.
Donotrefuelwiththeenginerunning,especiallyifhot,as
thisincreasesrehazardincaseoffuelspillage.
Neverattempttocheckoradjustthebeltswhentheen-
gineisrunning.
Neverlubricatethemachinewiththeenginerunning.
TULI12WEX2009AA5
48083741_EN31/07/2018
5

INTRODUCTION
Payattentiontorotatingcomponentsanddonotallow
anyonetoapproachtheseareastoavoidbecomingen-
tangled.
Hands,clothingortoolsgettingcaughtinthefanbladesor
enginebelts,cancauseamputations,violenthemorrages
andgenerateconditionsofgravedanger.Forthisreason
avoidtouchingorapproachingallrotatingormovingparts.
Asurgingsprayofthecoolantfromtheradiatorcancause
seriousburnsandscalds.
Beforecheckingthecoolantlevel,shut-offtheengine
andallowmachinetocooldowntheradiatorandhoses.
Slowlyunscrewthecaptoreleaseanyresidualpressure.
TULI12WEX2010AA6
Ifitisnecessarytoremovethecapwhileengineishot,
wearsafetyclothesandequipment,thenloosenthecap
slowlytorelievethepressuregradually.
Whencheckingthefuel,oilandcoolantlevels,uselights
andlampsexplicitlydesignatedasexplosionproof.If
thesetypesoflampsarenotused,resorexplosionsmay
occur.
TULI12WEX2011AA7
Hydraulicsystems
Jetsofuidsunderpressurecanpenetratetheskincaus-
ingseriousinjuries.
Avoidthishazardbyrelievingpressurebeforedisconnect-
inghydraulicorotherlines.
Relievetheresidualpressurebymovingthehydraulic
controlleversseveraltimes.
Tightenallconnectionsbeforeapplyingpressure.
Toprotecttheeyeswearafacialshieldorsafetygoggles.
Protectyourhandsandbodyfrompossiblejetsofuids
underpressure.
Swallowinghydraulicoilisaseverehealthhazard.
TULI12WEX2012AA8
48083741_EN31/07/2018
6

INTRODUCTION
Whenhydraulicoilhasbeenswallowed,avoidvomiting,
butconsultadoctororgotoahospital.
Ifanaccidentoccurs,seeadoctorfamiliarwiththistype
ofinjuryimmediately.
Anyuidpenetratingtheskinmustberemovedwithina
fewhourstoavoidseriousinfections.
Flammablesplashesmayoriginatebecauseofheating
nearlineswithuidsunderpressure,resultinginserious
burns.Donotweldorusetorchesnearlinescontaining
uidsorotherammablematerials.
Linesunderpressurecanaccidentallybepiercedwhen
theheatexpandsbeyondtheareaimmediatelyheated.
Arrangefortemporaryreresistantshieldstoprotect
hosesorothercomponentsduringweldingortorchuse.
Haveanyvisibleleakagerepairedimmediately.
Dischargedoilpollutestheenvironment.Soakupany
oilthathasspilledwithaproperbindingagent.Sweep
upbindingagentanddisposeofitseparatelyfromother
waste.
Neversearchforleakageswithngers;instead,usea
pieceofcardboardandalwaysweargoggles.
Neverrepairadamagedline;alwaysreplaceit.Replace
hydraulichosesimmediatelyondetectinganydamaged
ormoistareas.
Alwaysstorehydraulicoilintheoriginalcontainers.
TULI12WEX2013AA9
48083741_EN31/07/2018
7

INTRODUCTION
Hosesandtubes
Alwaysreplacehosesandtubesiftheconeendorthe
endconnectionsonthehosearedamaged.
Wheninstallinganewhose,looselyconnecteachend
andmakesurethehosetakesupthecorrectpositionbe-
foretighteningtheconnections.Clampsshouldbetight-
enedsufcientlytoholdthehosewithoutcrushingandto
preventchang.
Afterreplacingahoseonamovingcomponent,checkthat
thehosedoesnotfallbymovingthecomponentthrough
thecompleterangeoftravel.Besureanyhosewhichhas
beeninstalledisnotkinkedortwisted.
Hoseconnectionswhicharedamaged,dented,crushed
orleaking,restrictoilowandtheproductivityofthecom-
ponentsbeingserved.Connectorswhichshowsignsof
movementfromtheoriginalpositionhavefailedandwill
ultimatelyseparatecompletely.
Ahosewithafrayedoutersheathwillallowwaterpenetra-
tion.Concealedcorrosionofthewirereinforcementcould
subsequentlyoccuralongthehoselengthwithresultant
hosefailure.
Ballooningofthehoseindicatesaninternalleakagedueto
structuralfailure.Thisconditionrapidlydeterioratesand
totalhosefailuresoonoccurs.
Kinked,crushed,stretchedordeformedhosesgenerally
sufferinternalstructuraldamagewhichcanresultinoil
restriction,areductioninthespeedofoperationandulti-
matehosefailure.
Free-moving,unsupportedhosesmustneverbeallowed
totoucheachotherorrelatedworkingsurfaces.This
causeschangwhichreduceshoselife.
TULI12WEX2014AA10
O-rings
ReplaceO-rings,sealringsandgasketswheneverthey
aredisassembled.
NevermixnewandoldsealsorO-rings,regardlessof
condition.AlwayslubricatenewsealringsandO-rings
withhydraulicoilbeforeinstallationtorelevantseats.
ThiswillpreventtheO-ringsfromrollingoverandtwisting
duringmountingwhichwilljeopardizesealing.
48083741_EN31/07/2018
8

INTRODUCTION
Battery
Batteriesgiveoffexplosivegases.
Neverhandleopenamesandunshieldedlightsources
nearbatteries.(Nosmokingisaddressedinthenextin-
struction).
Topreventanyriskofexplosion,observethefollowing
instructions:
•Whendisconnectingthebatterycables,alwaysdiscon-
nectthenegative(-)cablerst.
•Toreconnectthebatterycables,alwaysconnectthe
negative(-)cablelast.
•Nevershort-circuitthebatteryterminalswithmetalob-
jects.
•Donotweld,grindorsmokenearabattery.
Batteryelectrolytecausessevereburns.Thebatterycon-
tainssulphuricacid.Avoidanycontactwiththeskin,eyes
orclothing.
TULI12WEX2015AA11
Treatment:
•EXTERNAL:Rinsewellwithwater,removinganysoiled
clothing.
•INTERNAL:Avoidvomiting.Drinkwatertorinseyour
mouth.Consultadoctor.
•EYES:Rinseabundantlywithwaterfor15minandcon-
sultadoctor.
•Whentheelectrolyteofabatteryisfrozen,itcanex-
plodeifyouattempttochargethebatteryorifyoutryto
starttheengineusingaboosterbattery.Alwayskeep
thebatterychargedtopreventtheelectrolytefreezing.
Providegoodventilationwhenchangingabatteryorusing
abatteryinanenclosedspace.Alwaysprotectyoureyes
whenworkingnearabattery.
TULI12WEX2016AA12
Neversettoolsdownonthebattery.Theymayinduce
ashortcircuit,causingirreparabledamagetothebattery
andinjuringpersons.
Neverwearmetalnecklaces,braceletsorwatchstraps
whenworkingonthebattery.Themetalpartsmayinduce
ashortcircuitresultinginburns.
Disposeofusedbatteriesseparatelyfromotherwastein
theinterestsofenvironmentalprotection.
TULI12WEX2017AA13
48083741_EN31/07/2018
9

INTRODUCTION
Flammableliquids
Whenhandlingammableliquids:
•Donotsmoke.
•Keepawayfromunshieldedlightsourcesandopen
ames.
Fuelsoftenhavealowashpointandarereadilyignited.
Neverattempttoextinguishburningliquidswithwater.
Use:
•Drypowder
•Carbondioxide
•Foam
Waterusedforextinguishingpurposeswouldvaporizein-
stantaneouslyoncontactwithburningsubstancesand
spreadburningoil,forexample,overawidearea.Water
generatesshortcircuitsintheelectricalsystem,possibly
producingnewhazards.
TULI12WEX2016AA14
Stayawayfromopenamesduringrellingofhydraulic
oilorfuel.
Fueloroilspillscancauseslippinghazards;thoroughly
containandcleanaffectedareas.
Alwaystightenthesafetyplugsoffueltankandhydraulic
oiltankrmly.
Neverusefueltocleanmachinepartsthatwillbeexposed
todirtordebris.
Useanon-ammableproductforcleaningparts.
Alwaysperformfueloroilrellinginwellairedandventi-
latedareas.
TULI12WEX2018AA15
Duringrefuellingholdthepistolrmlyandalwayskeepit
incontactwiththellerneckuntiltheendoftherefuelling,
toavoidarcingduetostaticelectricity.
Donotoverllthetankbutleaveaspaceforfuelexpan-
sion.
Neverrefuelwhentheengineisrunning.
Takeallthenecessarysafetymeasureswhenwelding,
grindingorwhenworkingnearanexposedame.
TULI12WEX2019AA16
48083741_EN31/07/2018
10

INTRODUCTION
Tires
Beforeinatingthetires,alwayschecktheconditionof
rimsandtheouterconditionoftiresforthepresenceof
dents,cuts,tearsofreinforcementpliesorotherfaults.
Beforeinatingatire,makesurethattherearenonearby
persons,thenpositionyourselfattreadside.
Wheninatingtires,ensuretirepressuredoesnotexceed
thatprescribedbythetiremanufacturer.Ensurethatthe
pressureoftherighttirecorrespondstothepressureof
thelefttire.
NOTE:Thefrontandreartirepressuresmaybedifferent.
Neverusereconditionedrimsbecausepossiblewelds,
heattreatmentsorbrazingsnotperformedcorrectlycan
weakenthewheelsandcausedamageorfailure.Deate
thetiresbeforetheirdisassembly.
Beforetakingoutpossiblejammedobjectsfromtherims,
itisnecessarytodeatethetires.Inatetiresbymeans
ofaninationpistolcompletewithextensionandpressure
controlvalve.
Useaninationcage.
TULI12WEX2020AA17
Cleaning
Cleantheexteriorofallcomponentsbeforecarryingout
anyformofrepair.Dirtanddustcanreducetheefcient
workinglifeofacomponentandleadtocostlyreplace-
ment.
Solventsshouldbecheckedthattheyaresuitableforthe
cleaningofcomponentsandalsothattheydonotriskthe
personalsafetyoftheuser.
Dirt,oil,greaseandscatteredtoolsaredangerousforpeo-
ple,becausetheycancreateslippingortrippinghazards.
Formachinecleaning,useajetofwarmwaterorsteam
underpressureandcommercialdetergents.Neveruse
fuel,petroleumorsolvents,becausetheycanleavean
oilyresiduethatattractsdust,andsolvents(evenifweak)
damagethepaintandcanleadtotheformationofrust.
Neverusewaterjetsorsteamonsensors,connectorsor
otherelectriccomponents.
Avoiddirectsprayofsealsandseamstopreventwater
penetrationinsidethecab.
TULI12WEX2021AA18
48083741_EN31/07/2018
11

INTRODUCTION
Wastedisposal
Improperlydisposingofwastecanthreatentheenviron-
ment.
EachcountryhasitsownRegulationsonthissubject.It
isthereforeadvisabletopreparesuitablecontainersto
collectandstoremomentarilyallsolidanduidmaterials
thatmustnotbescatteredintheenvironmenttoavoid
pollution.
Theseproductswillbedeliveredatpresetintervalsfollow-
ingtheforwardenvironmentalregulation.
Belowarelistedsomeproductsfromthemachinerequir-
ingdisposal:
•Lubricatingoil
•Brakesystemoil
•Coolantmixture,condensationrestsandpurean-
tifreeze
•Fuel
•Filterelements,oilandfuellters
•Filterelements,airlters
•Battery
Alsopollutedrags,paper,sawdustandglovesmustbe
disposedincompliancewiththesameprocedures.
Donotusefoodorbeveragecontainersthatmaymislead
someoneintodrinkingfromthem.Donotpourwasteonto
theground,downadrain,orintoanywatersource.Air
conditioningrefrigerantsescapingintotheaircandamage
theEarth’satmosphere.Governmentregulationsmayre-
quireacertiedairconditioningservicecentretorecover
andrecycleusedairconditioningrefrigerants.Obtainin-
formationontheproperwaytorecycleordisposeofwaste
fromyourlocalenvironmentalorrecyclingcentre,orfrom
yourDealer.
TULI12WEX2022AA19
48083741_EN31/07/2018
12

INTRODUCTION
Basicinstructions-Importantnoticeregardingequipmentservicing
Allrepairandmaintenanceworklistedinthismanualmustbecarriedoutonlybyqualieddealershippersonnel,
strictlycomplyingwiththeinstructionsgiven,andusing,wheneverpossible,thespecialtools.
Anyonewhoperformsrepairandmaintenanceoperationswithoutcomplyingwiththeproceduresprovidedherein
shallberesponsibleforanysubsequentdamages.
Themanufacturerandalltheorganizationsofitsdistributionchain,including-withoutlimitation-national,regional,or
localdealers,rejectanyresponsibilityfordamagescausedbypartsand/orcomponentsnotapprovedbythemanu-
facturer,includingthoseusedfortheservicingorrepairoftheproductmanufacturedormarketedbythemanufacturer.
Inanycase,nowarrantyisgivenorattributedontheproductmanufacturedormarketedbythemanufacturerincase
ofdamagescausedbypartsand/orcomponentsnotapprovedbythemanufacturer.
Theinformationinthismanualisup-to-dateatthedateofthepublication.Itisthepolicyofthemanufacturerfor
continuousimprovement.Someinformationcouldnotbeupdatedduetomodicationsofatechnicalorcommercial
type,orchangestothelawsandregulationsofdifferentcountries.
Incaseofquestions,refertoyourCASECONSTRUCTIONSalesandServiceNetworks.
48083741_EN31/07/2018
13

INTRODUCTION
Basicinstructions-Howtousethemaintenancestandardand
precautions
Application
WHENTHEMACHINEISNEW
Conrmthattheperformancesareinaccordancewithstandardspecicationsascomparedtotheperformancestan-
dards.
ATSPECIFICSELFINSPECTION(RULEBYCOUNTRY)
Usethedataforthecriterion,forthepurposeofcorrection,adjustmentandreplacement.
WHENPERFORMANCESAREDETERIORATED
Determinewhetheritiscausedbyafaultorendofservicelifeafterlonghoursofoperation,tobeusedforsafetyand
economicalconsiderations.
WHENMAINCOMPONENTSAREREPLACED
Forexample,usedatatorestoreperformancesofpumpsandothers.
Terminology
STANDARDVALUES
Valuestobeusedtoconditionorassembleanewmachine.Wherespecialnotesarenotgiven,thesevaluesrepresent
standardspecications(machinewithstandardattachmentsandstandardtires).
REFERENCEVALUESFORREMEDY
Valuesatwhichreadjustmentisrequired.Inordertoensureperformanceandsafetyitisstrictlyprohibitedtousethe
machineoverthespeciedvalues.
SERVICELIMIT
Thisisthelimitvalueatwhichreconditioningisimpossiblewithoutreplacementofparts.Ifthevalueisexpected
toexceedtheservicelimitbeforenextinspectionandcorrectionareperformed,replacethepartsimmediately.The
operationoverthespeciedvaluescausesincreaseofdamageandrequiresthedowntimeofmachine,andalso
causessafetyproblems.
Cautionstobeexercisedatjudgment
EVALUATIONOFMEASUREDDATA
Disagreementofmeasuringconditions,variationsofdatapeculiartoanewmachine,andmeasuringerrorsaretobe
evaluated.Determinegenerallyatwhatlevelsmeasuredvaluesarelocated,insteadofdeterminingwhetherornot
valuesfallwithinorrunoutofthereferencevalues.
DETERMININGCORRECTION,ADJUSTMENTORREPLACEMENT
Machineperformancesdeterioratewithtimeaspartswearandsomedeterioratedperformancesmayberestoredto
newlevels.Therefore,determinecorrection,adjustmentorreplacement,dependingupontheoperatinghours,kindof
workandcircumstancesinwhichthemachineisplaced,andconditionthemachineperformancestoitsmostdesirable
levels.
Othercautionstobeexercised
PARTSLIABLETODEGRADE
Rubberproducts,suchas,hydraulichoses,O-rings,andoilsealsdeterioratewithtime;replacethematregularinter-
valsoratoverhauls.
48083741_EN31/07/2018
14