Casio ALGEBRA FX 2.0 User manual

19990401
Chapter
Equation Calculations
Your graphic calculator can perform the following three types of
calculations:
•Simultaneous linear equations
•High degree equations
•Solve calculations
From the Main Menu, enter the EQUA Mode.
• {SIML} ... {linear equation with 2 to 30 unknowns}
• {POLY} ... {degree 2 to 30 equations}
• {SOLV} ... {solve calculation}
4-1 Simultaneous Linear Equations
4-2 High Degree Equations
4-3 Solve Calculations
4-4 What to Do When an Error Occurs
4

19990401
4-1-1
Simultaneous Linear Equations
4-1 Simultaneous Linear Equations
Description
You can solve simultaneous linear equation with two to 30 unknowns.
•Simultaneous Linear Equation with Two Unknowns:
a1x1+ b1x2= c1
a2x1+ b2x2= c2
•Simultaneous Linear Equation with Three Unknowns:
a1x1+ b1x2+ c1x3= d1
a2x1+ b2x2+ c2x3= d2
a3x1+ b3x2+ c3x3= d3
Set Up
1. From the Main Menu, enter the EQUA Mode.
Execution
2. Select the SIML (simultaneous equation) Mode, and specify the number of unknowns
(variables).
You can specify from 2 to 30 unknowns. To specify more than six unknowns, press
6(n) and then input a value.
3. Sequentially input the coefficients.
The cell that is currently selected for input is highlighted. Each time you input a
coefficient the highlighting shifts in the sequence:
a1→b1→c1 →… an→bn→cn→(n= 2 to 30)
You can also input fractions, complex numbers, and values assigned to variables as
coefficients.
You can cancel the value you are inputting for the current coefficient by pressing iat
any time before you press wto store the coefficient value. This returns to the
coefficient to what it was before you input anything. You can then input another value if
you want.
To change the value of a coefficient that you already stored by pressing w, move the
cursor to the coefficient you want to edit. Next, input the value you want to change to or
press 1(EDIT).
Pressing 3(CLR) clears all coefficients to zero.
4. Solve the equations.
…

19990401
4-1-2
Simultaneous Linear Equations
○○○○○
Example To solve the following simultaneous linear equations for x, y, and z
4x+y–2z=–1
x+6y+3z= 1
– 5x+4y+z=–7
Procedure
1mEQUA
21(SIML)
2(3)
3ewbw-cw-bw
bwgwdwbw
-fwewbw-hw
46(SOLV)
Result Screen
#Internal calculations are performed using a 15-
digit mantissa, but results are displayed using
a 10-digit mantissa and a 2-digit exponent.
#Simultaneous linear equations are solved by
inverting the matrix containing the coefficients
of the equations. For example, the following
shows the solution (x1, x2, x3) of a simultane-
ous linear equation with three unknowns.
x1a1b1c1–1 d1
x2=a2b2c2d2
x3a3b3c3d3
Because of this, precision is reduced as the
value of the determinant approaches zero. Also,
simultaneous equations with three or more
unknowns may take a very long time to solve.
#An error occurs if the calculator is unable to find
a solution.
#After calculation is complete, you can press
1(REPT), change coefficient values, and then
re-calculate.

19990401
4-2-1
High Degree Equations
# Internal calculations are performed using a
15-digit mantissa, but results are displayed
using a 10-digit mantissa and a 2-digit
exponent.
#Equations of third degree or higher may take
a very long time to solve.
#An error occurs if the calculator is unable to find
a solution.
# After calculation is complete, you can press
1(REPT), change coefficient values, and then
re-calculate.
4-2 High Degree Equations
Description
You can use this calculator to solve high degree equations such as quadratic equations and
cubic equations.
•Quadratic Equation:
ax2+ bx + c= 0 (a≠0)
•Cubic Equation:
ax3+ bx2+ cx + d = 0(a≠0)
Set Up
1. From the Main Menu, enter the EQUA Mode.
Execution
2. Select the POLY (high degree equation) Mode, and specify the degree of the equation.
You can specify a degree from 2 to 30. To specify a degree greater than three, press
3(n) and then input a value.
3. Sequentially input the coefficients.
The cell that is currently selected for input is highlighted. Each time you input a
coefficient the highlighting shifts in the sequence:
a→b→c→…
You can also input fractions, complex numbers, and values assigned to variables as
coefficients.
You can cancel the value you are inputting for the current coefficient by pressing iat
any time before you press wto store the coefficient value. This returns to the
coefficient to what it was before you input anything.You can then input another value if
you want.
To change the value of a coefficient that you already stored by pressing w, move the
cursor to the coefficient you want to edit. Next, input the value you want to change to or
press 1(EDIT).
Pressing 3(CLR) clears all coefficients to zero.
4. Solve the equations.
…

19990401
4-2-2
High Degree Equations
○○○○○
Example To solve the cubic equation
x3– 2x2– x+ 2 = 0
Procedure
1mEQUA
22(POLY)
2(3)
3bw-cw-bwcw
46(SOLV)
Result Screen
(Multiple Solutions) (Complex Number Solution)

19990401
4-3-1
Solve Calculations
4-3 Solve Calculations
Description
The Solve Calculation Mode lets you determine the value of any variable in a formula,
without going through the trouble of solving the equation.
Set Up
1. From the Main Menu, enter the EQUA Mode.
Execution
2. Select the SOLV (Solve) Mode, and input the equation as it is written.
If you do not input an equals sign, the calculator assumes that the expression is to the
left of the equals sign, and there is a zero to the right. *1
3. In the table of variables that appears on the display, input values for each variable.
You can also specify values for Upper and Lower to define the upper and lower limits of
the range of solutions. *2
4. Select the variable for which you want to solve to obtain the solution.
“Lft” and “Rgt” indicate the left and right sides that are calculated using the solution.*3
*1An error occurs if you input more than one equals
sign.
*2An error occurs if the solution falls outside the
range you specify.
*3Solutions are approximated using Newton’s
method. Lft and Rgt values are displayed for
confirmation, because Newton’s method may
produce results that are the real solution.
The closer the difference between the Lft and
Rgt values is to zero, the lower degree of error
in the result.
#The message “Retry” appears on the display
when the calculator judges that convergence is
not sufficient for the displayed results.

19990401
4-3-2
Solve Calculations
○○○○○
Example An object thrown into the air at initial velocity V takes time T to reach
height H. Use the following formula to solve for initial velocity V when
H = 14 (meters), T = 2 (seconds) and gravitational acceleration is G =
9.8 (m/s2).
H = VT – 1/2 GT2
Procedure
1mEQUA
23(SOLV)
ax(H)!.(=)ac(V)a/(T)-(b/c)
a$(G)a/(T)xw
3bew(H = 14)
aw(V = 0)
cw(T = 2)
j.iw(G = 9.8)
4Press fto highlight V = 0, and then press 6(SOLV).
Result Screen

19990401
4-4 What to Do When an Error Occurs
uError during coefficient value input
Press the ikey to clear the error and return to the value that was registered for the
coefficient before you input the value that generated the error. Try inputting a new value
again.
uError during calculation
Press the ikey to clear the error and display coefficient. Try inputting values for the
coefficients again.
4-4-1
What to Do When an Error Occurs
kk
kk
kClearing Equation Memories
1. Enter the equation calculation mode (SIML or POLY) you want to use and
perform the function key operation required for that mode.
•In the case of the SIML Mode (1), use number keys to specify the number of
unknowns.
•In the case of the POLY Mode (2), use number keys to specify the degree of
the polynomial.
•If you pressed 3(SOLV), advance directly to step 2.
2. Press 2(DEL •A).
3. Press w(Yes) to delete the applicable equation memories or i(No) to abort
the operation without deleting anything.