Casio QV-4000 User manual

PLAYBACK
E-109
PLAYBACK
You can use the camera’s built in monitor screen to play
back recorded images.
Basic Playback Operation
Use the following procedure to scroll through recorded im-
ages stored in the camera’s memory.
1. Align the power/function switch with .
: PLAY mode for playing back images
2. Rock the control button to the left or right, or
rotate the selector dial to scroll through im-
ages on the monitor screen.
NOTES
•Keeping the control button pressed toward the left or
right scrolls through images at high speed.
•In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower quality
than the actual display image. The actual display im-
age appears about two seconds after the preview im-
age. Note that a fully detailed actual display image
may not be available in the case of some images cop-
ied from certain digital camera models.
If you want to do this:
Scroll forward
Scroll backward
Do this:
Rock the control button to the right.
Rock the control button to the left.

PLAYBACK
E-110
Playing a Movie
Use the following procedure to play back a movie recorded
in the Movie Mode.
1. Align the power/function switch with .
2. Rock the control button to the left or right, or
rotate the selector dial to scroll through the im-
ages on the monitor screen until the movie you
want to play is displayed.
3. Click the control button to start movie play-
back.
•The following describes operations that are available
during movie playback.
Movie
Mode icon
If you want to do this:
Toggle the movie between
full screen and quarter
screen view
Playback forward
Playback in reverse
Pause playback
Skip to the next frame while
playback is paused
Skip to the previous frame
while playback is paused
Exit movie playback
Do this:
Press DISP.
Rock the control button to
the right.
Rock the control button to
the left.
Click the control button.
Rock the control button to
the right.
Rock the control button to
the left.
Press MENU.

PLAYBACK
E-111
Playing a Panorama
Use the following procedure to play back a panorama re-
corded in the Panorama Mode.
1. Align the power/function switch with .
2. Rock the control button to the left or right, or
rotate the selector dial to scroll through the
images on the monitor screen until the pan-
orama you want to play is displayed.
3. Click the control button to start panorama
playback.
•The following describes operations that are available
during panorama playback.
Panorama
Mode icon
If you want to do this:
Toggle the panorama
between full screen and
compressed view
Scroll forward
Scroll backword
Pause playback
Skip to the next image while
playback is paused
Skip to the previous image
while playback is paused
Exit panorama playback
Do this:
Press DISP.
Rock the control button to
the right.
Rock the control button to
the left.
Click the control button.
Rock the control button to
the right.
Rock the control button to
the left.
Press MENU.

PLAYBACK
E-112
Enlarging the Playback Image
Use the following procedure to enlarge the playback image
on the screen. You can enlarge the image up to 3.2 times its
normal size.
1. Align the power/function switch with .
2. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to enlarge.
3. Push the zoom controller upwards towards
(telephoto) to zoom in on the imge.
•Push the zoom controller downwards towards
(wide-angle) to zoom back out.
•The following describes operations that are available
while an enlarged image is on the playback screen.
2X
IMPORTANT!
•You cannot enlarge movie or panorama images.
NOTE
•Pushing the zoom controller downwards towards
(wide-angle) while a normal size (1X) image is on
the display switches to the 9-image view.
If you want to do this:
Shift the view right
Shift the view left
Shift the view upwards
Shift the view downwards
Exit the enlargement screen
Do this:
Rock the control button to
the right.
Rock the control button to
the left.
Rock the control button up.
Rock the control button down.
Press any button besides
the control button.

PLAYBACK
E-113
Displaying the 9-image View
The following procedure displays nine images on the monitor
screen at the same time.
1. Align the power/function switch with .
2. Push the zoom controller downwards towards
(wide-angle) .
•This displays the 9-image view, starting with the last
image you recorded.
3. Rock the control button to the left or right to
scroll through images.
26 27
123
456
789
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
25
•The following describes operations that are available
while the 9-image view is on the monitor screen.
If you want to do this:
Scroll forward
Scroll backward
Display the selection pointer
(See following section. )
Exit the 9-image view
Do this:
Rock the control button to
the right.
Rock the control button to
the left.
Press DISP.
Press any button besides
the control button or DISP.

PLAYBACK
E-114
Selecting a Specific Image in the 9-image
View
1. Display the 9-image view.
2. Press DISP.
•This causes a pointer to appear in the upper left cor-
ner of the monitor screen.
3. Rock the control button left, right, up, or down
to move the pointer to the image you want to
select, and then click the control button.
•This displays the single-image view of the selected
image.

PLAYBACK
E-115
Displaying the Histogram and
Other Image Information
The camera saves the histogram and other image informa-
tion along with the image itself. Use the following procedure
to view this other information.
1. Align the power/function switch with .
2. Press DISP to display the histogram and other
image information.
1 Histogram
7 Shutter
Speed
4 Light
Metering
3 Drive mode 2 Exposure
mode
5 Flash
8 White
balance
9 File size
6 Aperture
Use the histogram to check exposure when
recording.
• Exposure conditions indicated by the
histogram may not be accurate when
using the flash, when using multi-pattern
metering, or under certain other
conditions.
:Full Auto Mode
:Best Shot Mode
:Program AE Mode
:Aperture Priority AE Mode
:Shutter Speed Priority AE Mode
:Manual Mode
:1-Image Mode
:Continuous Shutter Mode
:AEB (Auto Exposure Bracketing) Mode
:Movie Mode
:Panorama Mode
:Multi-pattern metering
:Center-weighted metering
:Spot metering
:Flash on
:Flash off
1Histogram
2 Exposure mode
3Drive mode
4Light Metering
5Flash
6Aperture
7Shutter Speed

PLAYBACK
E-116
• Except for the histogram, “-----” is shown in place of
any item for which information is uncertain or other-
wise unavailable.
3. Rock the control button to the left or right, or
rotate the selector dial to scroll through im-
ages on the monitor screen.
• It may take some time for the image data to appear
after you select an image.
4. After you are finished, press DISP to clear dis-
play information.
8White balance
9File size
None:Auto
:Daylight
:Shade
:Tungsten
:Fluorescent
:Manual
IMPORTANT!
• The histogram does not appear during movie play-
back (page E-110).
• In the case of a panorama image (page E-111), the
histogram is displayed for the first image of the pan-
orama only.

PLAYBACK
E-117
IMPORTANT!
•Auto Power Off (page E-35) is disabled whenever
Slide Show is being used. This means you should not
leave Slide Show running when using batteries to
power the camera. Doing so can rundown batteries.
Be sure to stop Slide Show and turn off the camera
after you are finished.
•Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button op-
eration, or hold down the button until the image stops.
•Images copied from another digital camera or a com-
puter may take longer time to appear than the Slide
Show interval time you select.
Using the Slide Show Feature
Slide Show automatically plays back images in sequence at
a fixed interval.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Slide Show”and then click the control
button to apply it.
•This starts the slide show.
•Pressing MENU at this point displays a screen for set-
ting the interval between image changes within the
range of five to 30 seconds.
4. To stop Slide Show, press any button besides
MENU.

PLAYBACK
E-118
Resizing an Image
You can use the following procedure to change an image to
VGA size (640 x 480 pixels).
•VGA is the optimum image size for attachment to e-mail
messages or incorporation into Web pages.
1. Align the power/function switch with .
2. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to resize.
3. Press MENU.
4. Select “Resize”and then rock the control but-
ton to the right.
5. Select “Yes”and then click the control button.
•Select “No”to exit the procedure without resizing the
image.
IMPORTANT!
•The resized version of the image is saved as a new
file.
•The original, pre-resized image is also retained in
memory.
•2256 x 1504 (3:2) size images are resized for 640 x
427 pixels.
•Images smaller than 640 x 480 pixels cannot be
resized.
• MovieMode,PanoramaMode,andTIFF(uncompressed)
images cannot be resized.
•Resizing of an image cannot proceed if the message
“MEMORY FULL Delete unneeded images”appears.

DELETING IMAGES
E-119
DELETING IMAGES
You can delete the currently displayed image, one or more
selected images, all the images in one or more selected fold-
ers, or all the images in the camera’s memory.
IMPORTANT!
•Image deletion cannot be undone. Before deleting an
image, make sure you no longer need it or you have a
back-up copy saved on your computer, on diskette, or
on some other medium. Be especially careful with
“Deleting All Unprotected Images”operation, which
deletes all unprotected images in memory.
•A protected image cannot be deleted. See “Protecting
Images Against Deletion”on page E-125 for details on
protecting and unprotecting images.
•Delete operations are disabled when all of the images
on the camera’s memory card are protected.
Deleting the Displayed Image
Use the following procedure when you want to delete the
image that is currently on the monitor screen.
1. Align the power/function switch with .
2. Rock the control button to the left or right, or
rotate the selector dial to scroll through im-
ages and display the image you want to delete.
3. Press AE-L .
4. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
•If you change your mind and do not want to delete the
image, select “No”instead.
5. Click the control button.
•Displaying a panorama or movie image in step 2 of the
above procedure causes all of the images that make
up the panorama or movie to be deleted.

DELETING IMAGES
E-120
NOTE
•The camera does not maintain open spaces in its
memory. Deleting an image causes images following
the deleted image to be shifted up to fill in the empty
space created by the deletion. Note that images are
renumbered when they are shifted.
Deleting Selected Images
The following procedure lets you select one or more image
for deletion.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Delete”“Select”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to delete.
5. Rock the control button up or down to toggle
the displayed image’s icon on and off.
100-1 100-2 100-3
100-1 100-2
01010001.JPG 01010003.JPG01010002.JPG
01010003.JPG
File Names:
01010001.JPGFile Names:

DELETING IMAGES
E-121
•Any image marked with the icon is marked for de-
letion. It will be deleted when you perform the next
step of this procedure.
•You can repeat steps 4 and 5 to mark and unmark
multiple images if you want.
6. Click the control button.
7. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
•If you change your mind and want to cancel the delete,
select “No”instead.
8. Click the control button.
Deleting All Images in Selected Folders
Use the following procedure to select one or more folder for
deletion of all their images.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Delete”“Folder”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to delete.
5. Rock the control button up or down to toggle
the displayed folder’s icon on and off.

DELETING IMAGES
E-122
•Any folder with the icon is marked for deletion. All
its images will be deleted when you perform the next
step of this procedure.
•You can repeat steps 4 and 5 to mark and unmark
multiple folders if you want.
6. Click the control button.
7. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
•If you change your mind and want to cancel the delete,
select “No”instead.
8. Click the control button.
Deleting All Unprotected Images
Use the following procedure when you want to delete all of
the images currently on the camera’s memory card.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Delete”“All”and then rock the con-
trol button to the right.
4. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
•If you change your mind and want to cancel the delete,
select “No”instead.
5. Click the control button.

MANAGING IMAGES
E-123
MANAGING IMAGES
The image management capabilities of the camera make it
easy to keep track of images. You can protect images
against deletion, and even use its DPOF feature to specify
images for printing.
Folders and Files
When you shoot the first image on a particular day, the cam-
era automatically creates a folder for that date. All subse-
quent images you shoot on that day are stored in the same
folder.
•For full details about the organization of folders on the
memory card, see “Using a Memory Card to Transfer Im-
age Data”on page E-140.
Folders
A folder is created automatically whenever you shoot the
first image on a particular date. The name assigned to the
folder is based on the current date, as described below. You
can have up to 900 folders on a memory card at the same
time (subject to storage capacity restrictions).
Example: Folder created on July 19, which is the 100th
folder on the memory card
•The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
100_0719
Serial number
Underbar
Month
Day

MANAGING IMAGES
E-124
11070026.JPG
Month
Day
Serial number
Extension (.JPG/.TIF/.AVI)
Files
Each folder can contain up to 250 image files. If you try to
save the 251st image to a folder, the camera automatically
creates a new folder and stores the image there. The names
assigned to files are based on the current date, as shown
below.
Example: 26th image shot on November 7
•In addition to image files, memory cards also contain a
number of other files used by the system for image data
management.
•The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
•Panorama images are stored as groups of multiple indi-
vidual images.
•If there are more than 250 image files in a folder (due to
copying from another digital camera or other source), only
the first 250 (in name sequence) can be played back.

MANAGING IMAGES
E-125
Protecting Images Against Deletion
Image protection guards against accidental deletion of im-
ages stored on the camera’s memory card. A protected im-
age cannot be deleted until it is unprotected (page E-119).
You can protect and unprotect a single specific image, all the
images in a particular folder, or all images currently on the
memory card.
Protecting Selected Images
1. Align the power/function switch with .
2. Press MENU.
3. Select “Protect”“Select”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to protect.
5. Rock the control button up or down to toggle
the displayed image’s icon on and off.
•Any image marked with the icon is marked for pro-
tection. It will be protected when you perform the next
step of this procedure. Any image without the icon
will be unprotected.
•You can repeat steps 4 and 5 to turn on the icon
for multiple images if you want.
6. Click the control button to protect all the im-
ages marked for protection, and unprotect the
unmarked images.

MANAGING IMAGES
E-126
Protecting and Unprotecting All Images
in Selected Folders
1. Align the power/function switch with .
2. Press MENU.
3. Select “Protect”“Folder”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to protect.
5. Rock the control button up or down to toggle
the displayed folder’s icon on and off.
•Any folder with the icon is marked for protection.
All its images will be protected when you perform the
next step of this procedure. All images in any folder
without the icon will be unprotected.
•You can repeat steps 4 and 5 to turn on the icon
for multiple folders if you want.
6. Click the control button to protect the images
in all the folders marked for protection, and
unprotect the images in the unmarked folders.

MANAGING IMAGES
E-127
Protecting and Unprotecting All Images
1. Align the power/function switch with .
2. Press MENU.
3. Select “Protect”“All”and then rock the con-
trol button to the right.
4. Select the memory protection setting you
want, and then click the control button to apply
it.
To do this:
Protect all images on the memory card
Unprotect all images on the memory card
Select this:
On
Off
DPOF
The letters “DPOF”stand for “Digital Print Order
Format”, which is a format for recording on a
memory card or other medium which digital cam-
era images should be printed and how many
copies of the image should be printed. Then you
can print on a DPOF-compatible printer or at a
professional print service from the memory card
in accordance with the file name and number of
copies settings recorded on the card.
With this camera, you should always select im-
ages by viewing them on the monitor screen.
Do not specify images by file name without
viewing the file contents.
■DPOF Settings
File name, number of copies, date

MANAGING IMAGES
E-128
Making DPOF Settings for Particular Im-
ages
1. Align the power/function switch with .
2. Press MENU.
3. Select “DPOF”“Select”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to print.
5. Use the button operations described below to
make the DPOF settings you want.
If you want to do this:
Decrease the number of
copies value
Increase the number of cop-
ies value
Toggle printing of the record-
ing date on and off
Do this:
Rock the control button
down.
Rock the control button up.
Press DISP.
•Note that some printers may not support recording
date printing.
•An image selected for printing is marked by the
icon.
•An image for which printing of the recording date is
turned on is marked with the icon.
•You can repeat steps 4 and 5 to make DPOF settings
for multiple image files, if you want.
6. After you are finished making the settings you
want, click the control button to complete the
procedure.