Your Converter Box is now ready for use !
Please, read the User Manual for further details on using the Converter Box.
STEP 3: TURN ON THE CONVERTER BOX
STEP 4: SETTING THE OSD LANGUAGE
1. Press the MENU to display MENU LIST on the screen.
2. Select OPTION menu using ◀/▶then press ENTER or ▼.
3. Use /▲▼to select “Language” then press ▶or ENTER.
4. Use /▲▼to select the desired language then press ENTER.
5. Press MENU or ◀to return to the previous category or press
EXIT to return to TV viewing.
STEP 5: AUTO CHANNEL SCANNING
1. Press the MENU to display MENU LIST on the screen.
2. Press ENTER or ▼to enter the sub-menu of CHANNEL menu.
Use /▲▼to select ‘Channel Scan’.
3. Press ENTER or ▶to start auto scan of available channels.
If you want to stop channel scan in the middle of the scanning
process, press ENTER.
4. After the channel scan is completed, the channel with
the
lowest channel number will appear on the TV screen.
5. Press MENU or ◀to return to the previous category or press
EXIT to return to TV viewing.
UIDE
1. Press POWER on the converter box or BOX POWER on the remote controller.
The power indicator will turn green if the power is on.
2. Press TV POWER of remote controller to turn on your TV
3. When the converter box is connected only to RF cable, if current channel of TV is not CH04 or CH03,
press CH04 or CH03 of remote controller. ※ Initial RF output channel is CH04
4. When the converter box is connected to RCA cables, if your TV is in Tuner mode, press INPUT
of remote
controller to switch to AV mode.
