CCE – Cash Concepts Europe GmbH
Von-Behring-Straße 6a – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh
Initial operation
Please observe the following instructions when commissioning and using the machine in order to obtain an optimum counting
result.
•Connect the power plug to the socket.
•Now connect the power cord to the CCE 4150 and switch it on.
•Pour the coins into the coin hopper. Please make sure that no foreign objects (e.g. paper residues from coin rolls) or
foreign coins get into the machine.
•Select the correct coin size and coin thickness using the two settings. Always start a sorting process with the largest
coin. Smaller coins are sorted out to the side.
•Attach a coin sack or another collection container at the front and on the right-hand side of the eject compartment.
•Press the "Start/Stop" button and start the counting and sorting process.
•The coins will now be counted and the largest coin set will be ejected to the front. Repeat this process until all coins are
counted and sorted. Please make sure the setting is correct.
Functions
Addition function:
To add up the counting results of several counting operations, activate the ADD function by pressing the ADD/STORE button.
The LED below the display will light up accordingly. The CCE 4150 now adds up all coin quantities in the number of pieces. This is
recommended when counting large quantities of coins of one type. Press the ADD/STORE button again to switch off the addition
function.
Batch function:
The CCE 4150 offers you the possibility to count fixed coin quantities:
By pressing the COUNT / PRESET button you activate the batch function. With the keys +1000/+100/+10/+1 you can set the
desired value, which is shown in the lower display line. You can now count sorted coins or the largest coin in an unsorted coin
quantity with the CCE 4150. To do this, adjust both settings correctly, fill the coins into the coin hopper and press the
"Start/Stop" button. When the preset count stop is reached, the machine stops and you can remove the counted coins. By
pressing the "Start/Stop" key, the counting process will continue until all coins have been counted or the preset batch value is
reached again. Smaller coins will be sorted out into the right output tray as before.
Settings for Euro coins:
