cctv camera pros VM-HD16 Installation instructions

!
16ch HD-TVI AHD, HDCVI Analog CCTV Video MULTIPLEXER
VM-HD16 Specification and User Manual
1. Introduction
The VM-HD16 is a hybrid analog CCTV / HD CCTV video multiplexer that is compatible with the
following types of security cameras: HD-TVI, AHD, HDCVI, and analog CCTV.
2. Characteristics
● 16 channel BNC video input. Each channel can accept TVI, AHD, CVI, and analog CCTV video. Video
resolutions: D1, 960H, 1080p, 720p. All channels can be either PAL or NTSC.
● Separate brightness, contrast, saturation and hue controls for each channel.
● CVBS BNC video output (NTSC：720X480, PAL：720X576).
● HDMI and VGA video output. Supported resolutions: 1024x768, 1280x1024, 1440x900, 720P/50/60,
1080P/50/60.
● Selectable video display modes: 1ch w/optional sequence rotation, 2ch(left/right), 2ch(up/down), 3ch,
6ch, 8ch, 9ch, 16ch, and PIP mode.
● Output channel of PIP and 2CH mode can select by the menu.
● High performance FREEZE function.
● Channel rotation / auto sequence interval time can be adjusted by menu between 3-99 seconds.
● Digital ZOOM function.
● Video loss alarm.
● Users can operate device by keyboard and wireless remote control.
● Input, display, image, auto-sequence, language adjusted via menu system.
2. Front panel
KEY definition：short key press <1 second，long key press >1 second
●“MEUN”：short press to enter/exit main menu.
●“FREEZ/AUTO”：short press to enter freeze function, long press to enter auto-sequence function.
●“MODE/ZOOM”：short press to enter mode function, long press to enter zoom function.
●“ENTER”：enter button.
●“ ”：QUAD/UP multi-function button.
●“ ”：8CH/DOWN multi-function button.
●“ ”：9CH/LEFT multi-function button.
●“ ”：16CH/RIGHT multi-function button.
●“1/9” ：CH1/CH9 multi-function button.
●“2/10”：CH2/CH10 multi-function button.
●“3/11”：CH3/CH11 multi-function button.
●“4/12”：CH4/CH12 multi-function button.
●“5/13”：CH5/CH13 multi-function button.
●“6/14”：CH6/CH14 multi-function button.
●“7/15”：CH7/CH15 multi-function button.
●“8/16”：CH8/CH16 multi-function button.

!
4.Rear panel
●“IN 1~16”: 1~16 channel BNC video input.
●“OUT 1~16”: 1~16CH BNC video loop output.
●“OUT”: CVBS video output.
●“HDMI”: HDMI video output.
●“VGA”: VGA video output.
●“DC12V”: 12V power input.
5．FREEZE Function
Press the FREEZE button to enter freeze mode. Press again to cancel the freeze function. Show/hide the
FREEZE font on the right top of monitor simultaneously.
6．AUTO-SEQUENCE Function
Press the AUTOSEQ button to enter/exit the auto-sequance mode, show/hide the auto-sequance font
on the right top of monitor simultaneously.
7．MODE Function
Press the button to switch the output mode (PIP, 2CH, 3CH, 4CH, 5CH mode).
8．ZOOM Function
Press the ZOOM button to enter/exit ZOOM mode. This shows/hides a red zoom frame. Move the red
frame using the UP/DOWN/LEFT/RIGHT Button to select the desired zoom region, enable/disable the
zoom function that the region using the ENTER button.
Caution: you must exit the zoom mode for modes to operate.
9．MENU Operation
Press the MENU button to show/hide the main menu. The main menu includes 6 items as follow, press
the UP/DOWN button to select the item, press the ENTER button to enter the item.
9.1 INPUT SETTING.
Move to the desired position using the UP/DOWN/LEFT/RIGHT button, select the item using
the ENTER button, press the MENU button to apply the new setting and to go back to the main menu.

!
●“D1/AHD/TVI/CVI”: The type of input video.
●“PAL/NTSC” : The mode of input video。
9.2 DISPLAY SETTING
To select, move to the desired position using the UP/DOWN/LEFT/RIGHT buttons, then select the item
using the ENTER button, press the MENU button to apply the new setting and to go back to the main
menu.
9.3 IMAGE SETTING
Move to the desired position using the UP/DOWN buttons, adjust the value using the LEFT/RIGHT buttons,
press the MENU button to back to the main menu.
●“BRIGHTNESS”： Adjust the brightness of input video(0~99).
●“CONTRAST”： Adjust the contrast of input video(0~99).
●“SATURATION”： Adjust the saturation of input video(0~99).
●“HUE”： Adjust the hue of input video(0~99).
●“TITLE”： Setting the label of video channel. Press the ENTER to enter/exit. Adjust the position using the
LEFT/RIGHT buttons and adjust the character by the using the UP/DOWN buttons.
Caution: you must exit the title mode (blue bar will hide) for other modes to operate.

!
9.4 AUTO-SEQUENCE SETTING
Move to the desired position using the UP/DOWN buttons, adjust the value(0~99s) using the LEFT/RIGHT
buttons. Press the MENU button to go back to the main menu.
9.5 MODE SETTING
Move to the desired position using the UP/DOWN buttons. Adjust the output channel by using the
LEFT/RIGHT buttons. Press the MENU button to back to the main menu.
9.6 SYSTEM RESET
Move to the desired position using the LEFT/RIGHT buttons. Press the ENTER button to enter go back to
the main menu.
10. Product Specification
Model
VM-HD16 Hybrid HD / Analog CCTV multiplexer
Video Input
16ch BNC
Video Output
1 HDMI, 1VGA, 1 BNC analog (CVBS)
Power Supply, Consumption
12V/1A, <4W
Dimension, Weight
420x200x45mm, 2.0kg
Working Temperature
-10℃~+55℃
Working Humidity
10%~90%

!
For more information, please visit this product page.
https://www.cctvcamerapros.com/16ch-HD-CCTV-Multiplexer-p/vm-hd16.htm