CDA SVW141 Reference manual

1
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu
Passionate about style
SVW141/291 Drawers
Manual for Installation, Use and Maintenance

2
Important
This appliance must only be used for the purpose for which it is intended, i.e. warming crockery. Any other use
could be dangerous and may lead to premature failure of the appliance.
This appliance is not designed to be used by people (including children) with reduced physical, sensorial or
mental capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions
on how to use the appliance by someone who is responsible for their safety.
Under no circumstances should any external covers be removed for servicing or maintenance except by suitably
qualified personnel.
User information:
• Warming drawers become hot during and immediately after use. Take care not to touch any of the internal
components.
• The drawer may become hot during operation.
• After use, please ensure that the warming drawer is switched o.
• Keep children away from the appliance when in use, and immediately after use.
Appliance information:
Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the
event of a fault with your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity:
This appliance has been designed, constructed and marketed in compliance with safety requirements of Directive
73/23/CEE modified by directive 93/68/CEE for attribution of CE approval (Low voltage) and requirements of EMC
Directive 89/336/CEE modified by directive 93/68/CEE for attribution of CE approval.
This appliance has been manufactured to the strictest standards and complies with all applicable legislation,
including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into
contact with food conform to CE Regulation 1935/2004.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special
local authority dierentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment
and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.

3
Important
• Do not rest or sit on the drawer when open, as this will damage the telescopic runners.
• The maximum capacity of the drawer is 25 kg.
• Do not cover the bottom of the warming drawer with aluminium foil or other objects. Use only the
supplied mat.
• Never pour water directly into the warming drawer.
• Do not use this appliance for heating liquids
• To avoid scratching, do not drag dishes on the bottom of the warming drawer.
• Use suitable containers or crockery.
• Residual condensation could eventually damage the warming drawer and surrounding cabinets. It is advisable
to:
- cover food;
- dry the wet parts when the warming drawer is cold.
• Do not store plastic or ammable objects in the warming drawer
• We recommend the use of oven gloves or adequate protection when removing crockery from the drawer
• Never insert objects (e.g. screwdrivers, sharp objects, papers, etc.) in the heating element and ventilation slots.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY FAILURE
TO OBSERVE THESE INSTRUCTIONS.
Before first use
Before using the drawer for the first time we recommend that you clean it with a damp cloth, then dry thoroughly.
Preheat the empty drawer for at least two hours at maximum temperature. A slightly unpleasant smell may be
produced, caused by grease remaining on the heating element from the production process.

4
Using Your Warming Drawer
Use
•Place the dishes in the drawer
•Set the required temperature
•Press the power switch, which will light up to confirm the
warming drawer is switched on
•Close the drawer gently
•Switch the appliance o before removing the
warmed dishes
Selecting the Temperature
•The temperature knob enables a temperature
adjustment between approx. 30°C and 80°C.
•Turn the temperature knob to the required position.
•Do not force the temperature knob past the maximum
position to prevent damage to the thermostat.
•The symbols do not indicate absolute temperature
values, but recommendations for optimum settings for
cups and dishes.
Warming Times
The time necessary for warming depends on various
factors:
•Material and thickness of the dishes
•Quantity of dishes to be warmed
•Arrangement of dishes in the drawer
•Temperature setting
Therefore exact warming times cannot be provided.
With use, experience will demonstrate optimal warming
times and temperature settings.
1
2
Temperature
Setting
Temperature Information
Regarding Use
approx. 40°C To prevent hot drinks from
cooling too quickly, use
this temperature setting
to warm the cups to a
temperature that is safe
to touch.
approx. 60°C To prevent hot food from
cooling too quickly, use
this temperature setting
to warm plates or serving
dishes. The use of oven
gloves or pot holders is
recommended for this
setting.
1. Temperature knob
2. Luminous ON-OFF switch
When the drawer is closed, the power light is visible on the front
of the drawer to indicate the drawer is switched on.
on
off
Max
on
off
Max

5
Using Your Warming Drawer
Warming Times
The time necessary for warming depends on various factors:
•The load capacity depends on the height of the appliance and the size of the dishes.
•The following load examples are only a guide.
SVW141SS Diameter (cm)
6 Dinner plates 28
6 Soup bowls 10
1 Serving bowl 22
1 Serving bowl 19
1 Serving bowl 17
2 Serving platters 36
OR
10 Dinner plates 28
10 Soup bowls 22
OR
18 Soup bowls 22
2 Soup terrines 21x18
OR INDIVIDUALLY
20 Dinner plates 28
36 Soup bowls 22
30 Soup bowls 10
10 Pizza plates 36
80 Espresso cups
40 Cappuccino cups
SVW291SS Diameter (cm)
12 Dinner plates 28
2 Serving bowl 22
2 Serving bowl 19
2 Serving bowl 17
2 Serving platters 36
OR
20 Dinner plates 28
20 Soup bowls 22
OR INDIVIDUALLY
40 Dinner plates 28
60 Soup bowls 22
45 Soup bowls 10
20 Dinner plates 28
20 Soup bowls 22
20 Pizza plates 36
120 Espresso cups
60 Cappuccino cups
30 Punch glasses

6
Install
Check the measurements on fig 3 to confirm the requirements
for your installation. Please note, the oven dimensions show a
standard CDA oven and will vary depending on the appliance
being installed above the warming drawer.
1. Connect the mains lead to the product before installation. Run
the lead to the socket outlet to be used and connect to the
mains electrical supply. Do not switch on until installation is
complete.
2. Locate the product centrally on the supporting shelf and fix
into position using the fixing screws and plastic supports (fig
2).
3. Carefully fit the appliance on top of the warming drawer,
taking care not to scratch the top stainless edge of the drawer
unit. Ensure that the mains connection lead is located near to
the socket outlet to avoid having to remove the product again
to connect the mains electrical supply.
4. Secure the oven into the housing using appropriate fixing
screws.
5. The warming drawer is supplied with three metal filler
strips with a self-adhesive backing. These strips should be
attached to the warming drawer to seal any gaps between the
appliance and the housing. Remove the protective foil from
the trim and position the trim as shown in fig 1 so they are
ush with the rear and side walls of the housing, then attach
to the warming drawer. If there is no rear wall to the housing,
the rear trim is not required.
The casing of this appliance will get hot.
Ensure that any cables that may come
into contact with the appliance once
installed are suitable for use at 85°C.
Fig. 1
Fig. 2
Fig. 3
20-24
T
T
573
20-24
594
598
595
598
595
715-720
560-568
560-568
863-868
594
548 548
276
23
23
289
128 545
545
573
141
66

7
DOUBLE POLE
SWITCHED
USE A 3 AMP FUSE
Mains Electricity Connection
THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING
FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSE SPUR OUTLET AND PROTECTED BY A 3A FUSE.
We recommend that the appliance is connected by a qualied electrician, who is a member of the N.I.C.E.I.C. and
who will comply with the I.E.T. and local regulations.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
As the colours of the wires in the mains lead for the appliance may not
correspond with the coloured markings identifying the terminals connecting
to the fuse spur, proceed as follows:
•The wire which is coloured green and yellow must be connected to the
terminal marked E (Earth) or coloured green.
•The wire which is coloured blue must be connected to the terminal marked
N (Neutral) or coloured black.
•The wire which is coloured brown must be connected to the terminal marked
L (Live) or coloured red.
Note: Use a 3A Fuse
Assembly and electrical connection should be carried out by specialised personnel.
When installing this product we recommend you seek the help of another individual.

8
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu
Passionate about style
To contact our Customer Care Department, or for Service,
please contact us on the details below.