Acnodes KD 8191 User manual

Installation Guide
KD 8191
1U 19-inch LCD monitor Keyboard Drawer

P
.2
Package Contents
1 5
2 3 6
4 7
1 LCD keyboard drawer x 1 pc
2 Fasteners for rear L-bracket x 4 pcs
3 330mm rear mounting L-bracket x 1 pair
* N117 / 119 series mounting depth-adjustable from 315 to 880mm
* N1417 / 1419 series mounting depth-adjustable from 140 to 710mm
4 2-in-1 USB KVM cable x 1 pc and CD-6 3-in-1 PS/2 KVM cable x 1 pc
5 User manual x 1 pc
6 Power cord x 1 pc
7 Auto switch power adapter ( for external power version) x 1pc

Structure Diagram
1
2
3
6
4
7
5 8
9
1 Carry handle to release the 2-pt lock 6 Micro switch for screen auto power off
P
.3
2 2-point lock 7 Membrane switch (KVM option)
3 LCD interchangeable module kit 8 Keyboard interchangeable module kit
4 LCD membrane 9 Mouse interchangeable module kit
5 Adjustable rear mounting L-bracket

1.8 Installation
■Install each rear L-bracket using two fasteners shown
in Figure 1.
■Leaving the fasteners slightly loose.
Figure 1. Installing the rear L-bracket to the LCD keyboard drawer.
■Measure the front and rear mounting depth of the
rack.
■Align each rear L-bracket to a suitable length and
tighten the fasteners shown in Figure 2.
Figure 2. Aligning the rear L-brackets to a suitable length for the rack.
■Fix the LCD keyboard drawer into the rack.
* Hardware (screws and cage nuts) for fixing the
mounting bracket to the rack is not provided.
Figure 3. Fixing the LCD keyboard drawer into the rack.
P
.4

How to Use LCD Keyboard Drawer
■Gently pull the tab toward the front of the LCD shown
in Figure 4.
Figure 4. Pulling the tab toward the front of LCD.
■Flip up the LCD to a suitable angle shown in Figure 5.
Figure 5. Flipping up the LCD to a suitable angle.
■Operate the LCD keyboard drawer shown in Figure 6.
Figure 6. Operating the LCD keyboard drawer
P
.5

1.10 How to Use the Slides
■A white arrow release button is located on the outside
of each slide (shown in Figure 7).
Figure 7. White arrow button.
■Push the white arrow button on either side of the LCD
keyboard drawer to unlock (shown in Figure 8). Avoid
pressing the red button located on either side.
Figure 8. Pushing the white arrow button.
■Hold down the white arrow button until the LCD key-
board drawer is located in the rack (shown in Figure 9).
Figure 9. Pushing the LCD keyboard drawer into the rack.
P
.6

Connect to Server via USB Interface
Figure 10. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface
1.14 Connect to KVM via USB Interface
Figure 11. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface
Remarks :
■The above connection is only for the LCD keyboard without KVM switch built-in.
■For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
P
.
7

Connect to Server via PS/2 Interface
Figure 12. Example of connecting CD-6 3-in-1 PS/2 KVM cable to server via PS/2 interface
1.16 Connect to KVM via PS/2 Interface