Safety Information
This symbol, whereverit appears, alertsyou to thepresence of
uninsulated dangerous voltage inside the enclosure-voltage that
may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the accompanying
literature. Please readthe manual.
CAUTION:
1. Avoid Excessive Heat, Humidity, dust and vibration.
2. Avoid Physical Shocks.
3. Do Not Open The Case Or Attempt Repairs Or Modifications Yourself.
4. Clean Wit A Soft Dry Cloth.h
5. Always Use The Correct Power supply.
6. The Product Should Be Serviced By Qualified Service Personnel.
WARNING: TOPREVENT FIRE OR SHOCKHAZARD DO NOT
EXPOSE THIS APPLIANCETO RAIN ORMOISTURE.
Specifications
INPUT:
Connectors: XLR
Type: Electronically balanced/unbalanced, Thereforefiltered
Max Input Level: +22dBu, balanced orunbalanced
CMRR: >40dB, typically>55dBu at 1KHz
Impedance: balanced >50KOhms; unbalanced >25KOhms
OUTPUT:
Connectors: XLR
Type: Electronically balanced/unbalanced, Thereforefiltered
Max Output Level: +22dBu, balanced orunbalanced
Impedance: balanced 200Ohms; unbalanced 100Ohms
PERFORMANCE:
Bandwidth: 20Hz to20KHz,+0/-0.5 dB
Frequency Response: <3Hzto >90KHz, +0/-3dB
Signal-to-Noise: Ref, +4dBu,22KHz measurement bandwisth
Stereo Mode : Low Output >94dB;Mid Output >93;
High Output >91dB
Mono Mode : Low Output >94dB;
Low-Mid Output >94dB;
High-Mid Output >92dB;
High Output >88dB
Dynamic Range: >106dB,unweighted, any output
THD + Noise: <0.004% at +4dBu,1KHz
Inter channel Crosstalk: <-80dB, 20Hz to 20KHz
CROSSOVER FREQUENCIES:
Stereo Mode:
Low/High: 45 to96Hz or 450Hz to 9.6KHz(x10 setting)
Low/Mid: 45 to960Hz or 450Hz to 9.6KHz(x10 setting)
Mid/High: 45 to960Hzor 450Hz to9.6KHz(x10setting)
Mono Mode:
Low/Low-Mid: 45 to960Hz or 450Hz to 9.6KHz(x10 setting)
Low- Mid/High-Mid: 45to 960Hz or 450Hz to 9.6KHz(x10 setting)
High-Mid/High: 45 to960Hz or 450Hz to 9.6KHz(x10 setting)
Filter Type: linkwitz-Riley, 24dB/octave, state-variable
FUNCTION SWITCHES:
Front Panel:
Low Cut: activates40Hz Butter worth,12 dB/octave high-pass filter, one
switch per channel
Phase Invert: Invertsthe phase atthe out, one switch per output
Rear Panel:
x10: Multiplies crossoverfrequency range by10, one switch per channe
Mode: Selects stereo/monoand 2/3-way operation
LF SUM: Selectsnormal(strso) or mono-summed low frequency operation
Size & Weight
Operating Voltage: 110VAC 50/60Hz, 220VAC 50/60Hz
Mains Connection: IEC receptacle
Power Supply
Size: 482mm(W) x 150mm(D) x 45mm(H)
Weight: 3Kg
