thomann the box pro TPC25 User manual

TPC25
active crossover
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
02.10.2015, ID: 166613

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Connections and operating elements........................................................................................... 13
5 Installation and starting up................................................................................................................ 18
6 Technical specifications....................................................................................................................... 23
7 Plug and connection assignment.................................................................................................... 25
8 Cleaning....................................................................................................................................................... 26
9 Protecting the environment.............................................................................................................. 27
Table of contents
TPC25
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
active crossover
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the
customer service will gladly assist you.
General information
TPC25
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
active crossover
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
TPC25
7

2 Safety instructions
This device is used for splitting an incoming audio signal into separate frequency bands, that
are made available at the outputs. Use the device only as described in this user manual. Any
other use or use under other operating conditions is considered to be improper and may result
in personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
active crossover
8

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Completely disconnect the device from the power supply before you open or
remove covers. Mount all covers and attach them firmly before connecting the
device again.
Safety
Safety instructions
TPC25
9

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety instructions
active crossover
10

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
TPC25
11

3 Features
nOperating modes: 2-way stereo / sub mono
n125 Hz high and low pass filter
nCrossover frequency configurable via internal jumpers
nTransition steepness 24 dB / octave (Linkwitz-Riley)
nXLR in and outputs electronically balanced
nControllable limiter
Features
active crossover
12

4 Connections and operating elements
Front panel
Connections and operating elements
TPC25
13

1[LIMITER]
Indicator LEDs [CH1] and [CH2] (red). If you overload one or both channels of the device by an excessive input signal,
the associated LED flickers or lights up.
2[ON]
Power indicator. This LED lights up continuously during normal operation and turns off when the device is turned off.
3[POWER ON]
Main switch to turn the device on and off.
Connections and operating elements
active crossover
14

Rear panel
Connections and operating elements
TPC25
15

4 IEC chassis plug with fuse holder.
5[MONO LOW]
Crossover XLR output (low pass) to connect a subwoofer power amp for mono operation. The signals of both chan‐
nels are present at this output.
6[HI 1]
Crossover XLR output (high pass) to connect a mid / treble speaker power amp for stereo operation. Channel 1 signal
is present at this output.
7[LOW 1]
Crossover XLR output (low pass) to connect a subwoofer power amp for stereo operation. Channel 1 signal is present
at this output.
8[GND | LIFT]
To avoid ground loops, you can use this switch to disconnect the earth pin of channel 1 and the signal ground in the
device (‘Lift’ position / switch not pressed: no connection). ‘Ground’ position / switch pressed: Earth pin and signal
ground are electrically connected).
9[IN 1]
Balanced XLR input to connect an audio device (e.g. mixer) to channel 1.
Connections and operating elements
active crossover
16

10 [LIMITER THRESHOLD]
Rotary control for stepless threshold adjustment of the built-in limiter.
11 [HI 2]
Crossover XLR output (high pass) to connect a mid / treble speaker power amp for stereo operation. Channel 2 signal
is present at this crossover output.
12 [LOW 2]
Crossover XLR output (low pass) to connect a subwoofer power amp for stereo operation. Channel 2 signal is present
at this crossover output.
13 [GND | LIFT]
To avoid ground loops, you can use this Ground / Lift switch to disconnect the earth pin of channel 2 and the signal
ground in the device (‘Lift’ position / switch not pressed: no connection. ‘Ground’ position / switch pressed: Earth pin
and signal ground are electrically connected).
14 [IN 2]
Balanced XLR input to connect an audio device (e.g. mixer) to channel 2.
Connections and operating elements
TPC25
17

5 Installation and starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
The unit has been designed for rack mounting in a standard 19-inch rack; it occupies one rack
unit.
Rack mounting
Installation and starting up
active crossover
18

The device is configured by jumpers that are inserted in a particular schema on the internal
circuit board. The following illustrations show the various configuration options.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Completely disconnect the device from the power supply before you open or
remove covers. Mount all covers and attach them firmly before connecting the
device again.
NOTICE!
Qualified personnel
The configuration of the device may only be performed by qualified personnel or
an authorized service workshop.
When removing and inserting the jumpers, be careful not to damage the PCB
contacts.
Device configuration
Installation and starting up
TPC25
19

Overview plug-in locations
Installation and starting up
active crossover
20