Central Pneumatic CENTRAL PNEUMATIC 93305 User guide

Professional hvlP sPraY GUn kit
Start up Guide
Before first Use
Before everY Use
iteM
93305
1Take paint needle
out of gun body.
(Remove the Fluid Nozzle
with a 19 mm Wrench,
sold separately.)
Recommended for use with
oil based paints only.
IMPORTANT: Clean immediately after use, before paint dries in
Spray Gun. (See back for cleaning instructions).
2Clean paint needle and
inside gun body with
mineral spirits.
3Reassemble.
Thin paint
according to
manufacturer’s
instructions.
Strain paint
before using.
Paint
A
C
A
B
B
D

1
2
iMMediatelY after everY Use
A. Disconnect and empty paint cup.
B. Clean with mineral spirits.
IMPORTANT: Clean the paint sprayer after every use while paint is still wet.
Follow paint manufacturer’s recommendations for cleaning, solvent type,
and disposing of used solvent. Read paint sprayer owner’s manual
for paint sprayer instructions and safety warnings.
A. Fill paint cup with
mineral spirits and spray
through spray gun.
B. Repeat until spray
shows no paint color.
A. Disassemble and
clean inside of air gun.
B. Soak air cap in cleaner
and scrub clean.
Disconnect air hose.
1
2
3
4A B
Solvent
A B
Mineral
Spirits
A B
Mineral
Spirits