manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Centro
  6. •
  7. Network Router
  8. •
  9. Centro PoE-2010-8E User manual

Centro PoE-2010-8E User manual

-
The PoE-2010-8E-125W, with the super long range switch could Transmit data and power
Description:
Features:
★
10 10/100M adaptive RJ45 port, 4 port with PoE function.
★
Each port supports auto MDI/MDIX and auto negotiation.
★
Store and forwarding, support port isolation.
★
Support two lightning of uplink port.
★
Support IEEE 802.3x Full-Duplex and Backpressure Half-Duplex.
★
Support IEEE802.3af/at standards, can provide 15.4W/30W per port.
★
Automatic detection and recognition PD device which in accordance with
IEEE 802.3af/at and power supply for the device.
★
Intelligent power management, if the electrical equipment power exceeds the normal power output,
the system will cut off power supply of the port, after 1-2 minutes.
★
Low power consumption, no fan design, natural heat.
PoE-2010-8E(125W)
Unmanaged Fast-Ethernet Switch with PoE injector
up to 250 Meters.
Centro Technology Limited
-
Specification:
Item
Description
Power
Power Supply
External Power Adaptor
Voltage Range
100~240VAC 50/60H
Switch Consumption
123.2W for POE
Ethernet
Speed
1-8 Port:10/100Mbps Uplink:100Mbps
Transmission Distance
1-8port 100Meters with 100Mpbs 200Meters
with 10Mbps Uplink:100Meter with 100Mpbs
Network Switch
Ethernet Standard
IEEE
.
802
/
3 802
.
3u /802. 3af/af
Switching capacity
2G
Transfer Rate
14,880 pps for 10Mbps 148,800 pps for
100Mbps
MAC Address
2K MAC address table
Function
On
Green
LINK
/
ACT
On
Green
The port is connecting
Blinks
-
The port is receiving or transmitting data.
Off
-
The port is not linked successfully with the de
.
vice
PoE
On
Orange
PD is connected
Off
-
No PD is connected or power forwarding fails
Working
Environment
Working Temperature
-10~45
Storage Temperature
-40℃~70℃
Humidity Non condensing
0~85 %
Mechanical
Dimension L
*
W
*
H
275*185*44mm
Color
Gray
250 meters is starting to work
-
Installation steps:
Please check the following items before installation, if t is missing ,please contact the dealer.
10 ports PoE Ethernet Switch 1pcs
Ac power cable 1pcs
Accessory 1pcs
User manual 1pcs
Please follow the below installation steps
1.)Please turn off the signal power and display device power before installation, installation with power will
damage the transmission equipment;
3.)Use network cable connect PoE IP camera and 1~8 downlink ports of product respectively
4.)Use a network cable connect equipment up link port and NVR or computer Connect power adapter
5.)Check if the installation is correct equipment is in good condition the connection is stable then provide power for system
6.)Ensure the Ethernet equipment with power and work properly.
Trouble Shooting
Please follow the steps if the equipment has tro. uble
(1).Make sure the equipment is installed according to the manufactures installation guide
(2).Conf RJ45 cable order meets EIA/TIA568A or 568B standard.
(3).Every PoE port can provide PoE equipment maximum power less than 30W, please do not connect the PoE
equipment with power over 30W
(4).Replace the equipment with a proper functioning 8 ports PoE Ethernet Switch to check if the equipment is
damage.
(5).Please contact your vendor if trouble still e.xist.
Plug Producing Method
Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should conform
with EIA/TIA568A or 568B.
(1).Please remove 2cm long the insulating layer and bare 8 pairs UTP cable
(2).Separate the 8 pairs UTP cable and straighten them
(3).Line up the 8 pieces of cables per EIA TIA 568A or 568B
(4).Cut off the cables to leave 1.5cm bare wire
(5).Plug 8 cables into RJ45 plug make sure each cable is in each pin
(6).Use the wire crimper to crimp it
(7).Repeat above 9 steps to make the another end
(8).Use network tester to test the cable if t works
EIA/TIA 568A EIA/TIA 568B
Notice
When choose RJ45 make sure if one end is EIA/TIA568A,the other end should also be EIA/TIA568A.
When choose RJ45 make sure if one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
Pin Color
1
White
/
G
reen
2 Green
3 White/Orange
4
Blue
5
White
/
B
lue
6
Orange
7 White/Brown
8 Brown
Pin Color
1 White/Orange
2 Orange
3 White/Green
4 Blue
5 White/Blue
6
Green
7
White
/
Brown
8
Brown

This manual suits for next models

1

Popular Network Router manuals by other brands

D-Link DIR-882 user manual

D-Link

D-Link DIR-882 user manual

Cisco RV180 Administrator's manual

Cisco

Cisco RV180 Administrator's manual

Atlantis Land A02-F8-2C Technical features

Atlantis Land

Atlantis Land A02-F8-2C Technical features

TekFast CR-1010 user manual

TekFast

TekFast CR-1010 user manual

TECOM WL5041 user manual

TECOM

TECOM WL5041 user manual

Asus DSL-AC68R quick start guide

Asus

Asus DSL-AC68R quick start guide

ZBTlink Z6001AX-D instructions

ZBTlink

ZBTlink Z6001AX-D instructions

Libelium Meshlium user manual

Libelium

Libelium Meshlium user manual

Allied Telesis WebSmart AT-FS750/24POE installation guide

Allied Telesis

Allied Telesis WebSmart AT-FS750/24POE installation guide

Netopia CLI 874 Cli reference manual

Netopia

Netopia CLI 874 Cli reference manual

Fritz! FRITZ!Box 6360 Cable quick guide

Fritz!

Fritz! FRITZ!Box 6360 Cable quick guide

Satel SATELLAR XT 5R user guide

Satel

Satel SATELLAR XT 5R user guide

GRASS VALLEY APEX - datasheet

GRASS VALLEY

GRASS VALLEY APEX - datasheet

Moxa Technologies Managed Ethernet Switch/Extender user manual

Moxa Technologies

Moxa Technologies Managed Ethernet Switch/Extender user manual

Broan 79V installation instructions

Broan

Broan 79V installation instructions

Altronix eBridge100SPR installation guide

Altronix

Altronix eBridge100SPR installation guide

LevelOne GSW-0507 user manual

LevelOne

LevelOne GSW-0507 user manual

Gesytec Easylon user manual

Gesytec

Gesytec Easylon user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.