Certified International 299-2642-0 User manual

COMPACT AIR COMPRESSOR
MODEL NO. 299-2642-0
OWNER’S MANUAL
IMPORTANT:
If you have questions or problems, are missing parts or require technical
service, before returning to your retailer, please call our toll-free helpline:
1-877-466-8191.

WE DO NOT recommend using this product to inflate HIGH-VOLUME
APPLICATIONS (e.g. air mattresses, rafts), as it will be slow and could
put too much stress on the unit.
FEATURES
FEATURES
HIGH-PRESSURE APPLICATIONS
Car tires
Bicycle tires
Basketballs
Sports equipment
Party balloons
1

Please carefully read the manual included with this product. Misuse of
the unit could cause property /equipment damage and/or personal
injury.
1. Do not inflate products beyond manufacturers’ recommendations.
2. Do not allow the compressor or its components to get wet.
3. Do not leave the air compressor unattended while in operation.
4. Do not allow children to handle or operate this compressor.
5. Do not use this product for other than its intended use.
6. Do not disassemble or tamper with this compressor.
7. If the air compressor emits abnormal sounds or overheats, turn it off
immediately and let it cool for at least 30 minutes.
8. Inspect the air compressor before use. If cracked, broken or damaged parts
are found, have them repaired or replaced by a qualified technician.
9. Never expose the air compressor to rain, frost or temperatures above 30oC
(86°F) or temperatures below -30oC (-22oF).
10. Never use on people or animals.
11. Make sure the cord is not exposed to hot objects, oil or sharp edges.
12. For your own safety, you should only use accessories and parts specified in
the instructions, or recommended for use by the manufacturer. Use of
accessories and other parts that are not mentioned in the instructions may
cause an increased risk to the user.
1. Dial gauge
3. Vent
5. Hose holder
7. Compartment area door
9. Rubber feet
2. Button switch
4. Air hose
6. Balloon/ball adapter/fuse
8. 12 V adapter
WARNING
Please keep this manual on file for future reference. First check
contents of the box to ensure all parts are included and undamaged.
NOTE
2

1. Roll out the 12 V cord and connect the 12 V adapter to the vehicle’s 12 V
outlet.
2. Screw the thread connection onto the tire’s valve stem.
3. Operate the air compressor until the desired pressure is reached (press the
button switch to turn on the compressor and press again to turn it off).
4. Remove the thread connection from the tire and disconnect the 12 V car
adapter.
1. Roll out the 12 V cord and connect the 12 V adapter to the vehicle’s 12 V
outlet.
2. Screw the ball/balloon adapter into the thread connection.
3. Insert the ball/balloon adapter into the valve of the object to be inflated.
4. Operate the air compressor until the desired pressure is reached (press the
button switch to turn on the compressor and press again to turn it off ).
5. Remove the ball/balloon adapter from the inflated object’s valve and unscrew
ball/balloon adapter from the thread connector. Put the ball/balloon adapter
back in the storage compartment.
6. Disconnect the 12 V car adapter from the outlet and store the 12 V cord in
the compartment area underneath.
7. Note: if a pressure reading is required during inflation, the built-in pressure
gauge will provide an approximate reading only.
To avoid over-inflation of tires, please check the recommended car tire pressure
in the vehicle owner’s manual or on the vehicle placard located in the driver’s
door panel. For bicycle tires, please check the tire marking.
NOTE
Do not over inflate objects. Over inflation could cause damage and/or personal
injury. Do not leave inflator unattended during use. Allow inflator to cool for 10
minutes after 10 minutes of continuous operation. Read instructions before use.
CAUTION
OPERATION
Inflating tires and bicycle tires
Inflating sporting equipment (i.e. basketball) or
party balloons
3

Do not dispose of this product in household garbage at the end of its
life cycle; hand it over at a collection point for the recycling of
electrical and electronic appliances. The symbols on the product, the
instructions for use or the packaging will inform about methods for
disposal.
The materials are recyclable. By recycling, material recycling or other forms of
re-utilization of old appliances, you are making an important contribution to
protecting the environment.
FUSE REPLACEMENT
SPECIFICATION
ENVIRONMENTAL PROTECTION
1. To replace the fuse in the plug, twist off the upper cover.
2. Remove the faulty fuse and insert a new one.
3. Twist the upper cover back on the plug.
Model No.: 299-2642-0
Working Voltage: DC 12 V
Max. Pressure: 150 PSI
Fuse: 15 A
Accessories: 2 adapters, 1 spare fuse
Made in China
Imported by
Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
4