Champion 44KPRB User manual

The Flexible Warewashing System!
Champion’s prewash, wash, and rinse drive
modular units will provide the design flexibility
to equip any size or shape dishroom with a high
production, fully-equipped rack conveyor
warewashing machine.
The 44 Modular Series is available in several corner
configurations to accommodate special needs.
Racks are moved automatically by means of a 90°
curved pawl bar and straight conveyor.
Three prewash units are available: 22" straight light
duty, 36" straight heavy duty, and 39" corner heavy
duty versions.
Wash units are available in either a single straight
through wash/drive, or a two-unit system with a corner
wash and final rinse drive.
(3M) 3/99
44 Modular Series
44KPRB Corner
Single Tank Rack Conveyor
Modular System
QUICK FACTS
Capacities
Racks per hr. (NSF rated) 158
Wash tank (gal.) 20
Conveyor speed (ft./min.) 5.6
Motor horsepower
Drive 1/4
Prewash 22", 36" & 37" 1
Wash 2
Water consumption
Gal. per hr. (max. use) 324
Gal. per rack 2.05
Temperature °F
Wash 160
Rinse 180
Heating
Tank heat, electric (Kw) 15
Tank heat, steam (lbs./hr.
required at 15 psi flow pressure) 75
Electric booster (Kw required for 40° rise) 38
Electric booster (Kw required for 70° rise) 63
Steam booster
(lbs./hr. required for 40° rise) 170
Steam booster
(lbs./hr. required for 70° rise) 280
Venting
Load end (minimum cfm) 150
Unload end (minimum cfm) 400
*Shown with optional load end panel
Standard Features
Automatic tank fill
Common utility connections
Control circuit, 120-volt
Convenient top-mounted controls
Conveyor drive 1/4-Hp motor
Door activated drain closure
Door safety switch
Enclosure panels (front and unload end)
Energy Sentinel (idle pump shut-off)
External scrap basket on prewash units
Interchangeable spray arms
Leakproof doors, internally fitted
Low-water tank heat protection
Prewash motor: 1-Hp, Wash pump motor: 2-Hp
Rinse saver device
Stainless steel construction, including base and feet
Tank heat, choice of electric, steam coil or
steam injector

59"
66" 25"
25"
44"44"
25"
15"
22"
A
90°Application
Modular Units
Prewash 22" A
Prewash 36" B
Corner Prewash 39" C
Wash/Rinse Drive D
Corner Wash E
Final Rinse Drive F
EF
59"
80"
25"
25"
44"44"
25"
15"
36"
B
90°Application
EF
59"
83"
25"
25"
39"
44"44"
25"
15"
39"
C
180°Application
EF
83"
39"
25"
39" 44"
25"
90°Application
Also available for 54" Rack Conveyor Machine
CD
44 Modular Series
44KPRB Corner
Single Tank Rack Conveyor
Modular System
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: [phone] • www.championindustries.com
Warning:
Plumbing and electrical connections
should be made by qualified workmen
who will observe all the applicable
plumbing, sanitary and safety codes
and the National Electrical Code.
Note:
Water Hammer Arrestor (meeting
ASSE-1010 standard or equivalent)
to be supplied (by others) in common
water supply line at service connection.
®®
Typical Modular Configurations
Available in either right-to-left, or left-to-right operation
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
For electrical, drain, and booster
connections, consult the Factory.
For Options and Accessories,
see 44KB and 44KPRB Spec Sheet.
Also available for 54" Rack Conveyor Machine
90° Application 90° Application
90° Application
180° Application