Champion UH-100B User manual

OPTIONS & ACCESSORIES
1-RDT Dish Table Durable, heavy-gauge
stainless steel dish table with sink, stand-pipe
drain, removable scrap screen holder, drain-
board, backsplash and lower storage cabinet.
Sprayhose is optional. See 1-RDT catalog sheet.
Specify right hand or left hand sink.
Additional Dish Racks
17” Stand
Stainless Steel
6” Leg Stand
70°F Rise Booster
UH100 without Booster
Peg
Flat
(2M) 9/07 Printed in U.S.A.
CH087
Undercounter High Temperature
Dishwashing Machine with
Built-in Booster Heater
UNDERCOUNTER
STANDARD FEATURES
•NEW “Shear Energy” – a reduction in energy
requirements while maximizing performance!
•NEW “Multi-Phase” – allows for ineld conversion
from single to three phase electrical with ease!
• Rinse Sentry – extends the cycle time to ensure 180°F nal rinse.
• Built-in electric booster for 180°F nal rinse water
(standard 40°F or optional 70°F rise)
• Pumped drain
• Door safety switch
• Low-water tank heat protection
• Detergent and rinse aid pumps
• Quiet double-wall construction
• 15-3/4” door opening to accept larger wares,
including trays
• Stainless steel top and side panels
• 141 second cycle
• Wash pump, 1 Hp motor
• Fill and dump
• Prime switch on control panel
• Automatic tank ll
• One year parts and labor warranty
SPECIFIER STATEMENT
Specied unit will be Champion model UH-100B
undercounter high temperature dishwashing machine
with built-in booster heater.
Features 141 second total cycle, controls, Rinse Sentry,
detergent and rinse aid pump, stainless steel top and
side panels. Constructed of stainless steel.
1 year parts and labor warranty.
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: [phone] Fax: [phone]
www.championindustries.com
Project
Item No.
Quantity
NEW!
UH-100 Model without Booster Heater

CHAMPION
UH100B
25" [635]
4" [102]
15-3/4" [400]
32
1
33-3/4"
[857]
24" [610]
40-1/2"
[1029]
15-3/4"
[400]
Clearance
2" [51]
1
3
2
CHAMPION
UH100B
25" [635]
4" [102]
15-3/4" [400]
32
1
33-3/4"
[857]
24" [610]
40-1/2"
[1029]
15-3/4"
[400]
Clearance
2" [51]
1
3
2
Undercounter High Temperature
Dishwashing Machine
with Built-in Booster Heater
UH100B
UH100B UNDERCOUNTER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: [phone] • www.championindustries.com
Dimensions shown in inches and [milimeters]
Volume crated: 15 cu. ft.
Shipping weight crated: 215 lbs.
CHAMPION
UH100B
25" [635]
4" [102]
15-3/4" [400]
32
1
33-3/4"
[857]
24" [610]
40-1/2"
[1029]
15-3/4"
[400]
Clearance
2" [51]
1
3
2
Front View Side View Plan View
Warning Plumbing and electrical connections should be made by qualified personnel
who will observe all the applicable plumbing, sanitary and safety
codes and the National Electrical Code.
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated) 21
Motor horsepower
Wash 1
Water consumption
US Gal. per hr. (Max. use) 38
US Gal. per rack 1.8
Temperatures °F/°C
Wash 150/66
Rinse 180/82
Heating
Tank heat, electric (kW) 2.0
Booster, elec., 40°F rise, kW 6
Booster, elec., 70°F rise, kW 9
Time cycle in seconds
Wash 90
Rinse 26
Drain/fill 25
Total cycle 141
Standard 20” x 20” rack complement
Dish 1
Open 1
*Note: Electrical supply
service must be a 3-wire plus
ground for connection as
shown.
115V
115V208V
L1 L2 N G
UH-100 without booster
750 Watt tank heat
Elec. Rated
Specs. Amps
115/60/1 12
Field convertible to accept 3 phase power
UH-100B with 40°F/22°C Rise Booster
Elec. Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
Maximum
Overcurrent
Protective
Device
208/60/1 32 40 40
240/60/1 36 40 40
208/60/3 22 30 30
240/60/3 24 30 30
UH-100B with 70°F/39°C Rise Booster
Elec. Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
Maximum
Overcurrent
Protective
Device
208/60/1 45 60 60
240/60/1 50 60 60
208/60/3 29 35 35
240/60/3 33 40 40
Utilities
1Electrical
208-240/60/1; 3 wire plus ground, (See Box).
208-240/60/3; 4 wire plus ground, (See Box).
2Hot Water
1/2” supply; 140°F/60°C Min. hot water connection for 40°F/22°C rise booster;
110°F/43°C Min. hot water connection for 70°F/39°C rise booster. Incoming supply
pressure must maintain a Flow pressure 20-22 PSI (Pressure reducing valve, PRV,
supplied by customer or may be purchased unmounted from Champion).
Machine equipped with 3/4” [19] hose connector.
3 Pumped Drain
5/8” [15.9] I.D. flexible reinforced hose, 6 ft. [1829] long.
Max. drain flow 15 US gpm. [12.5 imp gal] Max. drain height 3 ft. [914]