Champion P7-30 User manual

(1M) 12/04 Printed in U.S.A.
CH062
7.5 Hp - 30" Pulper
Waste Handling System
P7-30
P7-30 PULPER
STANDARD FEATURES
• Flatware saver
• Flushing valve to pump-motor seal
• Flexible draw latches on feed tray assembly
• Remote mounted control box with overload
indicator lights and circuit breaker
• Removable, gasketless water extractor door
• Start/stop switch mounted on extractor
• Stainless steel tubular bulletfeet legs
• 1-1/2" total adjustment
• Total stainless steel construction
• Water level control
SPECIFIER STATEMENT
Specied unit will be Champion model P7-30 Pulper
waste handling system.
Features 7.5 Hp grinding motor with 30" diameter slurry
chamber, atware saver, four stationary blocks with four
cutting surfaces each, three tool steel rotating shearing
blades, large water extractor chamber with removable
gasketless door and external drain handle. Constructed
of Type 304 SST.
1 year parts and labor warranty.
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: [phone] Fax: [phone]
www.championindustries.com
Project
Item No.
Quantity
Champion Industries, Inc.
2674 N. Service Road
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]
OPTIONS & ACCESSORIES
Anti-vibration feet for quieter operation
Recirculating pump
Multiple trough congurations
Extractor ushing system
Spray Reel - 30ft. unmounted
Automatic shutdown timer
Deodorizer injector
Remote mounted start-stop station (unmounted)
Multiple trough congurations (9" & 12")

12-1/4" 12-1/16"18-1/4"15-1/8"
57-3/4"
25-15/16"
18-3/4"
60-5/16"
33"
24
1-15/16"
38-1/16"
18-13/16"
A
3
5-3/4"
7.5HP
B
D
C
FE
2HP G
16-5/16"
20-7/8"
36-7/8"
32-3/8"
20-9/16"
10"
3
19-1/8"
11-3/16" 2HP
11"
6-1/4"
1HP
4
21HP Recirculating Pump
Top View
24"
FLOORLINE
8"1
48"
16"
24"
FLOORLINE
8"1
48"
16" 9"
8"
4"
7.5 Hp - 30" Pulper
Waste Handling System
P7-30 PULPER
Utilities
1Electrical
See Chart.
2Optional Recirculation Pump
3Drain
1-1/2" NPT.
4Cold Water
1/2" NPT cold water connection.
Warning: Plumbing and electrical connections
should be made by qualified personnel who will
observe all the applicable plumbing, sanitary and
safety codes and the National Electrical Codes.
Note: Water Hammer Arrestor (meeting ASSE-
1010 standard or equivalent) to be supplied
(by others) in common water supply line at
service connection.
P7-30 with Optional Recirculating Pump
Mounted on Rear of Water Extractor
Front View
Side View
Remote Mounted
Control Cabinet
Front View
Top View
Item Qty. Description
A1 Slurry Chamber 30" dia.
B1 Motor – Main Drive 7.5 Hp
C1 Water Extractor Drive Motor 2 Hp
D1 Water Extractor
E1 Discharge Chute
F1 Scrapping Tray
G1 Start/Stop Station

12-1/4" 12-1/16"
57-3/4"
18-1/4"15-1/8"
33"
25-15/16" 23-1/4"
60-5/16"
18-13/16"
38-1/16"
4
2
A
7.5HP
B
3
5-3/4"
1-15/16"
1HP
C
F
2HP
D
E
G
7.5 Hp - 30" Pulper
Waste Handling System
P7-30 PULPER
Volume crated: 99 cu. ft.
Shipping weight crated: 1000 lbs.
Dimensions shown in inches
SPECIFICATIONS
Capacities Input
Waste (approx. lbs. per hr.) 1000
Motor horsepower
Pulper 7.5
Water Extractor 2
Slurry Chamber
Tank (in. dia.) 30
Cutting Disk (in. dia.) 12
Connections
Fresh water (in.) 1/2
Drain (in.) 1-1/2
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 800/532-8591 • Fax: [phone] • www.championindustries.com
P7-30 with Optional Recirculating Pump
Mounted on Front of Water Extractor
Front View
Top View
10"
19-1/8"
16-5/16"
32 - 3/8"
19-11/16"
1HP
11"
2
11 - 3/16" 2HP
20-9/16"
1HP Recirculating Pump
20-7/8"
36-7/8"
6-1/4"
4
3
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs Amps Ampacity Device
208/60/3 42 60 60
240/60/3 38 50 50
480/60/3 19 25 25
P7-30 w/1 Hp Recirculating Pump
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs Amps Ampacity Device
208/60/3 38 50 50
240/60/3 35 45 45
480/60/3 17 25 25
P7-30 w/out Recirculating Pump

7.5 Hp - 30" Pulper
Waste Handling System
P7-30
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 800/532-8591 • Fax: [phone] • www.championindustries.com
Trough Feed #1
Trough Feed #4
Trough Feed #2
Trough Feed #3
Trough Feed #6
Trough Feed #5
Top View
Feed Tray w/Hood
Front View
Under Table Feed Tray
Top View
7.5 HP
2HP
2HP
Front View
7.5 HP
2HP
2HP
30-1/4"
32-1/8"
30-1/4"
18-1/2" 18-1/2"
26-1/4"
13-1/8"
26-1/4"
33"
12"
15-1/8"
47-1/4"
3"
33"
12"
Sample Trough Configurations and Feed Methods
For additional trough configurations and feed methods, contact Factory
Trough
Feed #1
Trough
Feed #4
Trough
Feed #5
Trough
Feed #6
Feed Tray with Hood Under Table Feed Tray
Trough
Feed #2
Trough
Feed #3
Top ViewTop View
Front View Front View