CHANCE CHAOS Reference manual

NI]MBER:
DATE:
SUPERSEDES:
8408R1180-0
,June 20, 7997
Rides,
lnc.
SERVICE
BULLETIN
EffecLive Serial Number: All Unit.s
Ride: CHAOS Subiect: Lap Bar Indicat,or Light
- Wiiinq Rework
Chance Rides, Inc. , has developed a rework procedure .
for tLI.e 1ap bar
inaiiiroi liqht wirinq for the CHAOS amu3ement ride. The rework
;;;i;t;- of -d6""rinq-ifle wire irainess at the. Iight to restrict movemenL
of t.he wires and pr6vent fatiguing and breaking of the wlres '
AI1 owner/operat,ors of the above noLed amusementrides are required to
perform the' rework, using the installation inst,ructions and parts
?urnished wich this bulletin.
AII work must be performed by qualified personnel, capp-bIe of
understanding t.he function of the-palts and their proper rnstaflatron.
NOTICE
use only Ehose components authorized' specified or provided by chance
Rides, Inc.
Chance Rides, Inc. SPECIFICALLY DISCI,AIMS A}TY
LIABILITV fOT ].OSSCS
"Ji6ciuteA-liitft any unauthorized alteraLions and/o.r modifications or
Jaaiii-ons and installations of unauthorized components.

1.
,
INSTALLATION INSTRUCTIONS
Turn off power to the ride, or open the lap- bars t'o
inaicator- Iights off. The indicator lights^, are
ceniei of ea6h vehicle near the passengers' teet.
Remove
the liqht using a ,screw.driver' .Pu11 lhe
iiliieJs -il"t of=iii". i"-C"iticre-unlir about six inches
are ouEside the vehicJ-e,
fiberqlass behind
any riiring behind
turn all IaP bar
located at the
"oiqtail" and
of'the harness
receptacle
openlng.
6rf ''
PIGTAIL''
the
r,he
3.
4T
{6,,k.. HARNE''
h t*tcEPrAcLE
rl
Drill a 0.25r' hole through the
shown. Be careful not to damage
DRILL 0.25'I
HOLE
4. Insert a wire tie
pul1 back through (part, number 6ss55200)
through the small hole - -and
th-e-lirge opening. Needle-nbse pliers work well'
c,
WIRE
TIE
ALtach t,he wire t.ie aroud the harness (not. the rrpigtail") and pu11
"niii sn"g. Cut off excess wire tie'
push [he wire tie head and harness back lhrough the large opening'
Feed the remainder of Lhe "pigt.ail" back inside the vehicle and
install the light.
Removethe cover from the back of the vehicle. Locate the same
i;;;;;;= -lna -pufl ,rp gently to reqove any slack from the . harness '
Secure the harness to-t.he ve[Icle-fiame wieh anoLher wire tre'
6.
1.
8.
840BRl1B0-0
Paqe 2 of 2