ChargeTech Y2-PPLV8 User manual

PPLV8
Installation Guide
2. Fix 4 metal pieces
in rectangle pole A
with 12 x M5 screws.
1. Fix rectangle pole
on base plate with 4 x
M8 screws.
13.Fix rectangle pole B
on rectangle pole A
with 12 x M5 screws.
4
5
7
3
4. Fix metal plate on rectangle
pole with 4 x M5 screws.
5. Put extension cord
through rectangle pole.
6. Connect power cord with the
extension cord.
6
7.Fix PPLV8 on
rectangle pole with
4 x M5 Hex screws.
8.Unscrew 2 screws on
the cover at the bottom.
8

9.Unlock the front
door by using the key
provided.
10.Open the front door.
11. Hold the angle of the front door by using
the metal stick.
12. Connect the extended power cord with
the power cord.
1. Fix 2 x L racks on the top of the product by
using 2 x M3 screws.
2. Mark the hole on wall. Drill 2 x Ø6mm holes on
wall according to the Mark.
3.Fix 2 x screw studs in hole.
4. Fix 2 x M4 screws to secure the unit in place.
9
10
11
12
1. Mark the holes on floor.
2. Drill 4 x Ø12mm holes on floor
according to the Mark.
3.Bolt the base plate on the ground with
4 x expansion screws.
Option A: Fix product on wall Option B: Fix product on ground
1
1
2
3
2
3
4
Ø6mm
Ø12mm

PPLV8
Installation Guide
Hang on wall
B. Replace Cable
3.Fix 2 x L racks on the
bottom of the product
by using 2 x M3 screws.
4. Mark the holes on
wall.Drill 2 x Ø6mm
holes on wall according
to the Mark.
1
1. Drill 2 x Ø6mm holes (Suggest: 2m height)
on wall according to the drawing.Fix 2 x screw
studs and 2 x screws on wall.
2. Lift 5mm space for hanging WM10 on wall.
Ø6mm Ø6mm
2
200cm
Ø6mm
4
5
6
3
5. Fix 2 x screw studs in holes.
6. Fix 2 x M4 screws to secure the unit in place.
462 mm
1. Open the front door with key provided.
2. Unlock the door by pressing the button
on the lock.
1
2
2

C. Emergency
Set up of Admin Password,Press “0” “#” “0” “#” “0” “#”
to enter Admin Mode.
==> Press < 1 >
Factory reset.
==> Press < 2 >
Modify Password.
Admin password:
* * * * * * * *
==>Press < # >
Enter a new
8-digit password
==>Press < # >
The administramo
tor password is
modified success
fully.
☐ 1 ☐ 3 ☐ 5 ☐ 7
☐ 2 ☐ 4 ☐ 6 ☐ 8
☐ 0 Reset All
==> Press < # >
Resetting.....
Please wait a mo
ment.
Factory setting
reset completed.
LCD Displays:
Administrative Mode
- Model no.: Y2-PPLV8
- Input : AC 100 - 240V / 50~60Hz
- Output (per locker box) : 5V/2.4A Max
- Charging Cable (per locker box):
Micro USB Cable + Lightning Cable + Type C Cable
- Dimensions(PPLV8 only): 480 x 200 x 995 mm
- Dimensions(PPLV8 with Floor Stand): 590 x 280 x 1980mm
- Material (Housing) : Cold Rolled Steel
- To Prevent fire on shock hazard, do not expose the
device to rain or moisture.
- To avoid electric shock,please do not disassemble the
device.
- If trouble occurs,immediately disconnected the device
from wall socket.
Maintenance
- Wipe the device with a soft dry cloth to prevent dust
build up.
- keep the device away from strong volatile solvents or
chemicals, such as thinner, benzene, alcohol, pesticide,
rubber or vinyl plastic etc,which may lead to deterioration
or damage to your devices.
E. Specifications
F.Notes on use
3.Open the cable clip.
4. Unplug USB Cable.
5. Take out the cable through the hole.
3
4
5
Press button
“0”
Reset all boxs
Press
button “1”
Press button “2”
Press button
“1-8”
Reset corresponding
box