ImaxRC B3 Pro User manual

Instruction Manual
Easy to link, easy to charge!
 

Product Introduction
Thank you for purchasing imaxRC B3 Pro Easy balance charger. This charger is compact
and light, which can charge 2s or 3s of battery pack, especially there is separated
corresponding balance port for each battery pack. Before using it, please read the user
manual carefully.
         
01

Specification
Input Voltage: 110-240 V AC
Output Current: 3× 700 mA
Display: 3× Bicolor LED
Max. Charging Current: 3× 850 mA
Size: 100 mm * 60mm * 35mm
Weight: 180 g
Instructions
1. Please firstly connect the B3 Pro charger
to power, while the three power LEDs will
turn from red to green, which indicating that
the charger works in good order.
02

03
2. (Set 3s battery pack for example)
Secondly, please connect the battery pack
to 3s balance port , while the three power
LEDs will all turn into red and charging
begins. Please note once the charging of
one cell is done, the corresponding power
LED for it will turn green.
3. When the three power LEDs all turn
green, the charging for 3S battery pack is
finished.

04
WARNING
Please correctly connect the B3 Pro charger to power and battery pack according to the
procedure outlined in user manual.
Please use this charger under supervision.
Please place the charger in a dry environment and keep it away from fire.
Please don’t tightly pull and drag the power cord or replace it, or else the fire/electric
shock will be caused.
Please don’t touch the charger and power with wet hands or it will bring in electric shock.
To extend the working life of the charger, please remove it from power once charging is
finished.
Children must be watched by adults to use the charger.
Packing List
imaxRC B3 Pro Charger × 1
Power Cord × 1
For more products, please go and visit the official website of polimax: http://www.imaxrc.com

All specifications and figures are subject to change without notice.
Printed in China ©2010