ChargeTech UV Clean & Charge AC Cabinet User manual

RoHS
User Manual
Model: UV Clean & Charge AC Cabinet
Charging Cabinet
ChargeTech
Address:
Tel:
Website:
205 Highway 101, Solana Beach, CA 92075
888-250-8756
ChargeTech.com
[e-mail]
[email protected]
Email:

1
Notes before use
Please carefully read the following before using and installing this product.
You need to strictly check the whole cabinet and each compartment to
ensure everything is intact. Use the following steps to ensure proper power
connection.
1. Please make sure of socket type.（FIG.1）
2. Please make sure the socket can be earthed. If
you cannot ensure this situation, please check with
an AVO meter. When socket has a ground
connection, there must be no voltage between PE
and N, and PE and L must have L110V （FIG.2）
3.Please do not use in the following environment. Please place in a suitable space
and apply brakes to the two front wheels. This will secure the cabinet from moving
forward/back.
4.Please do not place near any windows, as you need to avoid sun and rain. This
will maximize the product safety and lifetime.
Slope High temperature
Avoid sun and rain
Damp
（FIG.1）
N L
Pe
(FIG.2)
2
Maintenance instructions
For first-time use or if product has not been used for a long time, please follow
these steps:
When moving the cabinet, please release the brake from the two front wheels
(using hand pull-up brake); avoid damaging the wheels.
When cleaning, do not pour water, alcohol, or cleaner into the cabinet; avoid
wetting the power board, as it will affect use and safety.
If you want to discontinue use for a long period of time, please pull the power plug
from the socket and put package in a transparent bag, for extra protection.
When doing repairs, do not work on the unit with it plugged in. An expert must
repair the cabinet, and the power cable must be unplugged.
Operating instructions
Please take out AC power cord from a small box and plug into the socket.
Open back / side door with the triangle key and turn on the blue switch on leakage
protector.
Please connect laptops / tablets charging cable so that devices will charge when the
cabinet is powered on.
When the Green Power Button is pressed, both the UV cleanning cycle and charging
cycle will begin simultaneously. After 5 minutes, the UV cleaning cycle will be
complete and the lights will turn off. The charging cycle will continue until it reaches
its programmed time (up to 24 hours later).
**Warning: UV light is harmful to human skin and eyes. To protect from any
damage to yourself or others, the UV lights will shut off should the cabinet
doors be opened while the UV cycle is still running.

Smart Digital Control Panel
New control panel smart switch operation instructions
Power Button:
When the Green Power Button is pressed, charging cycle will begin. The charging
cycle will continue until it reaches its programmed time (up to 24 hours later).
UV-C Button:
Press only the UV button to run the UV cleaning cycle. The cycle runs for 5 minutes
and can be run separately from the charging cycle.
SET Charging Time:
Pressing the SET Button will allow you to set the number of hours for the charging
cycle. Pressing the up and down buttons will cycle numbers between C01 to C24
representing the number of hours. Choose a charging time between 1 and 24 hours.
Local Time Setting:
Press SET twice and the numbers should start blinking. Press the up and down buttons
to set the local time. Press SET once when the time is correct.
Lock/unlock keys setting:
Press the UP "^" button for 4 seconds until you hear a beep. This will lock all the
buttons. Repeat the process to unlock all buttons.
34
Operating instructions
Take out the AC power cord, plug into
the socket.
Open back door with the triangle key,
turn on RCCB then close the door.
Plug in device charging adapters to the AC outlets
in the back door. Connect devices and set inside.

5 6
Charging Cabinet Technical Parameters and Configuration
No. Items Content
1Product name
Black
2Capacity 10 Bay 20 Bay 30 Bay 40 Bay
3Color
4Dimension
10 Bay-26.2 x 21.7 x 18.5 in
20 Bay-26.2 x 21.7x 31.3 in
30 Bay-26.2 x 21.7 x 43.7 in
40 Bay-26.2 x 21.7 x 55.1 in
5Locker Front door with key lock
Back door with triangle lock
6Combination Back side power parts (PDU), front side
placement area
Input voltage
7
50 – 60 HZ According to local electric
supply
Input frequency
8
110V
10/20/30/40Bay UV Clean & Charge AC Cabinet
15 AC power cord 1PC
The above product parameters and configuration for reference only. Subject to change
without notice.
Carton Package
Dimension
10 Bay-28.7 x 25 x 20.9 in
20 Bay-28.7 x 25 x 33 in
30 Bay-28.7 x 25 x 47.2 in
40 Bay-28.7 x 25 x 57 in
10 Bay-79 lbs
20 Bay-108 lbs
30 Bay-150 lbs
40 Bay-194 lbs
10 Bay-89 lbs
20 Bay-130 lbs
30 Bay-173 lbs
40 Bay-220.5 lbs
16
17
18
Net weight
Gross weight
UV lamp
Ground Wire
Manual
1PC
1PC
11
12
13
Handle 20 Bay-2pcs
14
9 RCCB 1PC Action current 0.03A t≦0.1s
Overheat protection 2Pcs Cooling fan in power area
10
10 Bay-1pcs 20 Bay-2pcs
30 Bay-3pcs 40 Bay-4pcs
40 Bay-1pc30 Bay-1pc
Press the green button to start the first cycle.
Default charging time is 10 hours.