ChargeTech WM9 User manual

B. Change Artwork
Unscrew 4
screws to
replace the
artwork.
A.Hang on wall
3
4
3.Lift 5mm space
for hanging WM9
on wall.
4. Mark the screw
holes on wall.
5
5. Drill 1 x Ø6mm holes on wall according to
the mark. Fix 1 x screw studs on wall.
Ø6mm
6
7
6. Fix 1 x screws on wall.
7. Connect female DC
connector with AC
adaptor & power cord.
WM9
1. Fix L shape
metal pieces at
bottom by using 2
screws.
2. Drill 4 x Ø6mm holes on wall according
to the drawing. Fix 4 x screw studs and 4 x
screws on wall.
1
167.0
236.0
167.0
236.0
WALL MOUNT & TABLE TOP
CHARGING STATION

1
1
2
1. unscrew 12
screws at back.
1. Unscrew 4 screws
to remove the cover.
2.Unscrew and
remove the L, N and
ground cable
3.take off the cable
front the bottom.
4. Re-install the
cables back from
back side.
2. unplug the USB cable
and replace a new one.
D. Replace Cable
- Input : AC 110V-230V / 50~60Hz
- Output (Charging Cables) : PD 20W (Max) x 6
- Dimensions(wall mount): 480 x 145 x 326mm
- Dimensions(wall mount with Floor Stand):
480 x 480 x 1300mm
- Material (Housing) : Cold Rolled Steel & Acrylic
- To Prevent fire on shock hazard,do not expose the
device to rain or moisture.
- To avoid electric shock, please do not disassemble the
device.
- If trouble occurs,immediately disconnected the device
from wall socket.
Maintenance
- Wipe the device with a soft dry cloth to prevent dust
build up.
- keep the device away from strong volatile solvents or
chemicals, such as thinner,benzene,alcohol, pesticide,
rubber or vinyl plastic etc,which may lead to deteriora-
tion or damage to your devices.
E. Specifications
F.Notes on use
5. Let the cable come out
from the back cover’s hole.
6. reinstall the cover back.
N
LBrown Cable
Blue Cable
Green Cable
C.Table Top
7. Unscrew 8 screws at the bottom and
tune the support pieces backward.
Install 8 screws back finally.
167.0
1
2
3
4
5
6
7