Chauvet DJ 6SPOT User manual

User Manual

TABLE OF CONTENTS
1. BEFORE YOU BEGIN...................................................................................................................................................................1
SAFETY INSTRUCTIONS............................................................................................................................................................................................2
2. INTRODUCTION ...........................................................................................................................................................................3
PRODUCT OVERVIEW...............................................................................................................................................................................................3
3. SETUP ..........................................................................................................................................................................................4
ACPOWER.............................................................................................................................................................................................................4
Power Linking...............................................................................................................................................................................................................................4
MOUNTING..............................................................................................................................................................................................................5
Orientation.....................................................................................................................................................................................................................................5
Rigging..........................................................................................................................................................................................................................................5
4. OPERATING INSTRUCTIONS......................................................................................................................................................6
USING THE CONTROL PANEL....................................................................................................................................................................................6
MENU MAP.............................................................................................................................................................................................................6
CONFIGURING THE STARTING ADDRESS....................................................................................................................................................................6
OPERATION ............................................................................................................................................................................................................7
DMX Operation.............................................................................................................................................................................................................................7
DMX Channel Values ...................................................................................................................................................................................................................7
Master/Slave Mode (Sound-Active)..............................................................................................................................................................................................8
STANDALONE..........................................................................................................................................................................................................8
Sound-Active.................................................................................................................................................................................................................................8
Automatic......................................................................................................................................................................................................................................8
5. TECHNICAL INFORMATION ........................................................................................................................................................9
TECHNICAL SPECIFICATIONS .....................................................................................................................................................10
RETURNS.......................................................................................................................................................................................11
CONTACT US...................................................................................................................................................................................12

6SPOT User Manual Rev. 4 1
1.BEFORE YOU BEGIN
What Is
Included
•6SPOT
•Power Cord
•Mounting Kit
•Warranty Card
•Quick Reference Guide
Unpacking
Instructions
Carefully unpack the product immediately
and check the container to make sure all the
parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included
accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as
missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET within 7 days of delivery.
Text
Conventions
Convention Meaning
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Not
following these instructions may make the product not work, cause
damage to the product, or cause harm to the operator.
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all
respects. However, Chauvet assumes no responsibility and specifically disclaims any
and all liability to any party for any loss, damage or disruption caused by any errors or
omissions in this document, whether such errors or omissions result from negligence,
accident or any other cause. Chauvet reserves the right to revise the content of this
document without any obligation to notify any person or company of such revision,
how
ever, Chauvet has no obligation to make, and does not commit to make, any such
revisions. Download the latest version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited to, all design,
text and images are owned by Chauvet.
© Copyright 2017 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and 6SPOT are registered trademarks or trad
emarks of
Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and
other countries. Other company and product names and logos referred to herein may be
trademarks of their respective companies.

6SPOT User Manual Rev. 4 2
Safety Instructions
•Please keep this User Manual for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
•Always make sure that you are connecting to the proper voltage, and that the line
voltage you are connecting to is not higher than that stated on the decal or rear panel
of the fixture.
•This product is intended for indoor use only! To prevent risk of fire or shock, do not
expose fixture to rain or moisture.
•Make sure there are no flammable materials close to the unit while operating.
•The unit must be installed in a location with adequate ventilation, at least 20in (50cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
•Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse source.
•Secure fixture to fastening device using a safety chain.
•Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate fixture at
temperatures higher than this.
•In the event of a serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
•Never connect the device to a dimmer pack.
•Make sure the power cord is never crimped or damaged.
•Never disconnect the power cord by pulling or tugging on the cord.
•Never carry the fixture directly from the cord. Always use the hanging/mounting
bracket.
•Avoid direct eye exposure to the light source while it is on.
Please read these instructions carefully. It includes important information
about the installation, usage and maintenance of this product.

6SPOT User Manual Rev. 4 3
2.INTRODUCTION
Product Overview
Power In
Control Panel
(LED Display)
DMX Out
DMX In
Microphone
Adjustment
Power Out
Microphone
Fuseholder
Tripod Stand
Fastening Knob
Back Panel

6SPOT User Manual Rev. 4 4
3.SETUP
AC Power
This fixture is auto-ranging and runs on 100~240 VAC, 50/60 Hz power.
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating
indicates its average current draw under normal conditions.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only
as a 0 to 100% switch.
Always connect the fixture to a circuit with a suitable electrical ground.
Power Linking
This fixture contains power linking via the Edison outlet located in front of the power input cable.
Please see the diagram below for further explanation.
The maximum quantity of 6SPOT products that may be linked is 20 units @ 120V, 33 units
@ 230V
The power linking shown in this document is for the CHAUVET® North American version
ONLY! Therefore, it is the customer’s responsibility to check with the Dealer/Distributor
regarding power linking on the local version of the product. Connections and availability
may change, depending on the power requirements and/or regulations of each
country/region.
Additional power
link out
Fixture #1
Fixture #2
Fixture #3

6SPOT User Manual Rev. 4 5
Mounting
Orientation
The 6SPOT may be mounted in any position, provided there is adequate room for ventilation.
Rigging
This fixture has multiple rigging options. They are as follows:
Floor Standing (using the two mounting/standing brackets)
Hanging (using the two mounting/standing brackets)
Hanging (using the two hanging clamp Mounting points)
Be sure that the structure can support the weight of the fixture. Please see the “Technical
Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This
may be done with a screw, nut and bolt, or a mounting clamp.
The hole in each bracket is 13 mm in diameter.
When rigging, consider routine maintenance and control panel access. Please see the following
notes on installation.
•If the power link out is intended to be used with multiple fixtures, take into account the
length of each power cable, and mount the fixtures close enough to one another to
accommodate for this.
•When aiming the fixtures, use the bracket/yoke adjustment knobs. Loosen the knobs,
adjust to the desired angle, and then tighten the knobs by turning them clockwise. Do
not use tools for this step, as it may cause damage.
•Safety cables must always be used!
Pod Adjustment Knob
Hanging Clamp
Mounting Point (2)
Mounting/Standing
Bracket (2)
Fixture Adjustment
Knob (2)

6SPOT User Manual Rev. 4 6
4.OPERATING INSTRUCTIONS
Using the Control Panel
Access control panel functions using the four buttons located directly underneath the LED display.
BUTTON
FUNCTION
<MODE>
Used to scroll through the current
operating mode, as well as back
out of the current menu option
<UP>
Used to select a increasing value
<DOWN>
Used to select an decreasing
value
<ENTER> Used to activate a selection and
store it to memory
Menu Map
Mode
Selection 1
Selection 2
Description
DMX Mode
Addr
DMX Operation
d001~d512
Select the DMX starting address
Slave
Operation
SLAU
Slave
Invert H-
Invert the operation (pod 1 becomes pod 6,
Slave mode only)
No~YES
Select YES to activate this function
Sound-active SoUd rUn
Trigger the built-in program to the beat of the
music, using the internal microphone
Automatic P-
Trigger the built-in programs with variable
speed
P-_1~10
Select one of the built-in programs
S 01~S100
Adjust the speed of the automatic program
Configuring the Starting Address
The 6SPOT fixture uses up to eight DMX channels. In this DMX configuration/personality, the
highest configurable address is 505. Any address higher than this will prevent access to all of the
channels while in this mode; however, if you desire to use one of the other DMX configurations
(personalities), please consider the total DMX channels when selecting a DMX address.
If this is your first time using DMX, we recommend reading the “DMX Primer” section in the
“Appendix”.

6SPOT User Manual Rev. 4 7
Operation
DMX Operation
This operating mode will allow for control with an external DMX controller. You must set the
starting address for this mode.
If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer”
section in the “Appendix” of this manual.
Please see the instructions below for details on this mode.
1. Plug the fixture into power.
2. Plug a DMX controller into the fixture in a daisy chain configuration.
3. Press <MODE> until Addr appears on the LED screen.
4. Press <ENTER>.
5. Using <UP>&<DOWN>, select the DMX starting address.
6. Press <ENTER>.
DMX Channel Values
CHANNEL
VALUE
FUNCTION
1
000 ó010
011ó045
046ó080
081ó115
116ó150
151ó185
186ó220
221ó255
Pod 1
Blackout
Red
Green
Blue
Yellow
Magenta
Cyan
White
2
000 ó010
011ó045
046ó080
081ó115
116ó150
151ó185
186ó220
221ó255
Pod 2 (run speed when CH.8 is between 011~239)
Blackout
Red
Green
Blue
Yellow
Magenta
Cyan
White
3~6
000 ó010
011ó045
046ó080
081ó115
116ó150
151ó185
186ó220
221ó255
Pod 3~6
Blackout
Red
Green
Blue
Yellow
Magenta
Cyan
White
7
000ó009
010ó255
Strobe
No function
Strobe (slow~fast)
8
000ó010
011ó047
048ó095
096ó119
120ó144
145ó167
168ó191
192ó215
216ó239
240ó255
Mode
Individual pod control with strobing (channels 1~7)
Automatic 1
Automatic 2
Automatic 3
Automatic 4
Automatic 5
Automatic 6
Automatic 7
Automatic 8
Sound-active

6SPOT User Manual Rev. 4 8
Master/Slave Mode (Sound-Active)
This mode allows a single unit, the master, to operate in either automatic or sound-active mode.
When additional (slave) fixtures are daisy chained to the master, they will all synchronize with the
master and run the same lighting show.
Please see the instructions below for details on this mode.
Master:
1. Place the master fixture first in the daisy chain.
2. Set the master fixture to operate in either automatic or sound-active mode; please see
the appropriate sections of this manual for details on this procedure.
Slave:
1. Daisy chain from the output of the master fixture.
2. Press <MODE> until SLAU appears on the LED screen.
Plug the master fixture in LAST!
Only connect 31 slave fixtures when operating in this mode!
Using the “Invert” function will invert any fixture(s) it is active on. This is useful when you
desire to have symmetry to your lighting show. Please see the “Menu Map” for further
details.
Standalone
Sound-Active
Please see the instructions below for details on this mode.
1. Plug the fixture into power.
2. Press <MODE> until SoUdappears on the LED screen.
3. Press <ENTER>.
4. Use the microphone sensitivity adjustment knob to adjust the fixture to react to the beat
of the music.
5. Press
<ENTER>
.
The microphone will only respond to low frequencies (bass).
Automatic
Please see the instructions below for details on this mode.
1. Plug the fixture into power.
2. Press <MODE> until AUTO appears on the LED screen.
3. Press <ENTER>.
4. Using <UP>&<DOWN>, adjust the program speed (S_ _1~S100) (fast~slow).
5. Press
<ENTER>
.

6SPOT User Manual Rev. 4 9
5.TECHNICAL INFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
•Unplug the product from power.
•Wait until the product is at room temperature.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface and reachable internal components.
•Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
•Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•Softly wipe any dirt or grime to the outside edges of the external optics or
transparent surface.
•Gently polish the external optics and transparent surfaces until they are free of haze
and lint.
Always dry the
external optics and transparent surfaces carefully after cleaning
them.

6SPOT User Manual Rev. 4 10
TECHNICAL SPECIFICATIONS
WEIGHT & DIMENSIONS
Length........................................................................................................35.5 in (902 mm)
Width .............................................................................................................2.2 in (56 mm)
Height..........................................................................................................6.5 in (165 mm)
Weight .........................................................................................................10.1 lbs (4.6 kg)
POWER
Input voltage ............................................................100~240 VAC, 50/60 Hz (auto-ranging)
Power and current............................................................. 52 W; 0.43 A max (120 V, 60 Hz)
Power consumption........................................................... 57 W; 0.25 A max (230 V, 50 Hz)
Power linking ........................................................max 20 units @ 120 V; 33 units @ 230 V
Fuse..................................................................................................................F 1 A, 250 V
LIGHT SOURCE
Type...............................................................................................high-power, tri-color LED
Quantity ..............................................................................................................................6
Rating.....................................................................................(3 W) 375 mA x 3; 50,000 hrs
PHOTO OPTIC
Lux (per light).......................................................................................................814 @ 1 m
Beam angle (per light)..................................................................................................... 11°
INDOOR/OUTDOOR
Rating.....................................................................................................For indoor use only
THERMAL
Maximum ambient temperature......................................................................104° F (40° C)
CONTROL & PROGRAMMING
Data input ..............................................................................locking 3-pin XLR male socket
Data output.........................................................................locking 3-pin XLR female socket
Data pin configuration ............................................................ pin 1 shield, pin 2 (-), pin 3 (+)
Protocols.....................................................................................................DMX-512 USITT
DMX Channels....................................................................................................................8
ORDERING INFORMATION
6SPOT......................................................................................................................6SPOT
WARRANTY INFORMATION
Warranty........................................................................................... 2-year limited warranty

6SPOT User Manual Rev. 4 11
R
ETURNS
In case you need to get support or return a product:
•If you are located in the U.S., contact Chauvet World Headquarters.
•If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
•If you are located in Mexico, contact Chauvet Mexico.
•If you are located in Benelux, contact Chauvet Europe BVBA.
•If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com for distributors outside the U.S.,
UK, Ireland, Mexico, or Benelux.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet
products to them. Visit our website www.chauvetlighting.com for contact details.
Call the corresponding Chauvet Technical Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief
description of the cause for the
return.
To submit a service request online, go to www.chauvetdj.com/service-request.
Send the merchandise prepaid, in its original box, and with its original packing and
accessories. Chauvet will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write the following information on a piece of paper
and place it inside the box:
•Your name
•Your address
•Your phone number
•RMA number
•A brief description of the problem
Be sure to pack the product
properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. FedEx packing or double-
boxing are
recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).

6SPOT User Manual Rev. 4 12
CONTACT
US
USA WORLD HEADQUARTERS
General Information – Chauvet
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
Technical Support
Voice: [phone]
Fax: [phone]
Email: [email protected]m
World Wide Web www.chauvetlighting.com
EUROPE
General Information - Chauvet Europe BVBA
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: [phone]
Technical Support
Email: [e-mail]
World Wide Web www.chauvetlighting.eu
General Information - Chauvet Europe Ltd.
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Email: [e-mail]
World Wide Web www.chauvetlighting.co.uk
MEXICO
General Information - Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP
52000
Voice: [phone]
Technical Support
Email: [e-mail]
World Wide Web www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record.
Follow their instructions to request support or to return a product. Visit our website for contact
details.