Chauvet DJ Wash FX2 User manual

User Manual

TABLE OF CONTENTS
Wash FX 2 User Manual Rev. 1
TABLE OF CONTENTS
1. Before You Begin....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims................................................................................................................ 1
Text Conventions.......................................................................................... 1
Symbols ........................................................................................................ 1
Disclaimer ..................................................................................................... 1
Product at a Glance ...................................................................................... 2
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
Fuse Replacement............................................................................................. 5
Power Linking..................................................................................................... 5
Mounting ....................................................................................................... 6
Orientation.......................................................................................................... 6
Rigging............................................................................................................... 6
4. Operation .................................................................................... 7
Control Panel Operation................................................................................ 7
Menu Map..................................................................................................... 7
Configuration (DMX) ..................................................................................... 7
DMX Personalities.............................................................................................. 7
Starting Address................................................................................................. 7
DMX Channel Assignments and Values....................................................... 8
28Ch................................................................................................................... 8
8Ch..................................................................................................................... 9
3Ch..................................................................................................................... 10
Configuration (Standalone)........................................................................... 10
Automatic Programs........................................................................................... 10
Auto-Program Speed ......................................................................................... 10
Auto-Program Dimmer ....................................................................................... 10
Sound-Active Mode............................................................................................ 10
Sound Sensitivity................................................................................................ 11
Preset Color Mode............................................................................................. 11
Custom Color Mixing.......................................................................................... 11
IRC-6 Infrared Remote Control..................................................................... 11
IRC-6 Operation................................................................................................. 12
Master/Slave Mode....................................................................................... 13
5. Maintenance................................................................................ 14
Product Maintenance.................................................................................... 14
6. Technical Specifications ........................................................... 15
7. Returns........................................................................................ 16
Contact Us .................................................................................. 18

Page 1 of 16
Wash FX 2 User Manual Rev. 1
BEFORE YOU BEGIN
1. BEFORE YOU BEGIN
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2017 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States ofAmerica.
CHAUVET, the Chauvet logo, and Wash FX 2 are registered trademarks or trademarks of Chauvet & Sons
LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and
product names and logos referred to herein may be trademarks of their respective companies.
•WashFX2
•PowerCord • Warranty Card • Quick Reference Guide
CONVENTION MEANING
1–512 Arange of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
SYMBOL MEANING
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.

Page 2 of 16
BEFORE YOU BEGIN
Wash FX 2 User Manual Rev. 1
Product at a Glance
Safety Notes
Use on Dimmer Auto Programs 
Outdoor Use Auto-ranging Power Supply 
Sound-Active Replaceable Fuse 
DMX User-Serviceable 
Master/Slave 
• Always connect the product to a grounded circuit.
• Make sure the power cord is not crimped or damaged.
• Always disconnect the product from the power source before cleaning it or replacing the
fuse.
• Never disconnect the product from the power source by pulling or tugging on the cord.
• If mounting the product overhead, make sure there is adequate support for the product’s
weight and always secure the product using a safety cable.
• Make sure there are no flammable materials close to the product when it is operating.
• Avoid direct eye exposure to the light source while the product is on.
• Donot touch theproduct’s housing whentheproduct is operating because the housing can
be very hot.
• The product is not intended for permanent installation.
• The product is for indoor use only. It is rated at IP20.
• Do not expose the product to rain or moisture.
• Always connect the product to a power source that is within the voltage range stated on the
label or rear panel of the product.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Always install the product in a location with adequate ventilation.
• Always leave at least 20 in (50 cm) between the product and adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Do not operate the product at an ambient temperature higher than104 °F (40 °C).
• Never carry the product by the power cord or any moving part.
• Always use the mounting/hanging bracket to lift the product.
• If there is a serious operating problem, stop using the product immediately.
• Nevertrytorepairtheproduct.Repairscarriedoutbyuntrainedpeoplecanleadtodamage
or malfunction.
• To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product to someone else, be sure that
they also receive this document.

Page 3 of 16
Wash FX 2 User Manual Rev. 1
INTRODUCTION
2. INTRODUCTION
Product Overview
Microphone
DMX
In/Out
Fuse
Holder
Power
In
Quad LEDs
Menu
Buttons
Power
Out
LED
Display
Mounting Bracket
Fan
Safety
Loop
Fan

Page 4 of 16
INTRODUCTION
Wash FX 2 User Manual Rev. 1
Product Dimensions
11.69 in
297 mm
7.88 in
200.3 mm
5.72 in
145 mm
7.5 in
192 mm

Page 5 of 16
Wash FX 2 User Manual Rev. 1
SETUP
3. SETUP
AC Power
The Wash FX 2 has an auto-ranging power supply and it can work with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s
specifications chart. The listed current rating indicates the product’s average current draw under normal
conditions.
Fuse Replacement
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Insert the fuse holder back in place and reconnect power.
Power Linking
The product provides power linking via the Edison outlet located in the back of the product. Please see the
diagram below for further explanation.
Power Linking Diagram
• Always connect the product to a protected circuit (a circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve itslifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the product from the power outlet before replacing the fuse.
You can power link up to 6 Wash FX 2 products on 120 VAC or up to 12 Wash FX 2
products on 230 VAC.
The power linking diagram corresponds to the North American version of the
product ONLY! If using the product in other markets, you must consult with the local
Chauvet distributor as power linking connectors and requirements may differ in
your country or region.
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
1st Product 2nd Product 3rd Product Additional
Products
Power
Source

Page 6 of 16
SETUP
Wash FX 2 User Manual Rev. 1
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Wash FX 2 may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the
product’s weight. (see the Technical Specifications)
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
Mounting Bracket
Safety Cable
(such as CH-05 from
Chauvet)
Mounting Clamp
(such as CLP-15 or CLP-15N
from Chauvet)
Bracket
Adjustment Knob

Page 7 of 16
Wash FX 2 User Manual Rev. 1
OPERATION
4. OPERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Menu Map
Configuration (DMX)
The Wash FX 2 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website http://www.chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf.
DMX Personalities
The Wash FX 2 has three DMX personalities; a 3Ch, 8Ch, and 28-channel personality.
To choose which DMX personality to use, follow the steps below:
1. Press <MENU> repeatedly to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> to select CHnd.
3. Press <ENTER> and either 3Ch, 8Ch, 28Ch will show on the display.
4. Use <UP> or <DOWN> to select the desired DMX personality.
5. Press <ENTER>.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product’s channels.
The Wash FX 2 uses up to 28 DMX channels, which defines the highest configurable address as 485.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
BUTTON FUNCTION
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
MODE PROGRAMMING LEVELS DESCRIPTION
DMX Mode 3Ch d001-512 Sets the DMX personality8Ch
28Ch
Static Colors C-- C001-022 Static colors
Auto
Programs P-- P 1-16 Auto programs
Auto Speed S-- S001-100 Program speed for P1~P16
Dimmer dIM L001-255 Adjust the dimmer on auto and sound
programs
Sound-Active
Mode Snd Snd1-9 Sound-active programs
Sound
Sensitivity SEnS u001-100 Sound sensitivity
Custom
Color Mixing u--
r000-255 Custom static colors
Combines Red, Green, Blue, and
White
g000-255
b000-255
u000-255
Infrared
Mode SEt on Turns infrared on or off
oFF

Page 8 of 16
OPERATION
Wash FX 2 User Manual Rev. 1
1. Press <MENU> repeatedly until 3Ch, 8Ch, or 28Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d 1–512.
4. Press <ENTER>.
DMX Channel Assignments and Values
28Ch
CHANNEL FUNCTION VALUE PERCENT/SETTING
1 Auto Program
000 005 No function
006 020 Program 1
021 035 Program 2
036 050 Program 3
051 065 Program 4
066 080 Program 5
081 095 Program 6
096 110 Program 7
111 125 Program 8
126 140 Program 9
141 155 Program 10
156 170 Program 11
171 185 Program 12
186 200 Program 13
201 215 Program 14
216 230 Program 15
231 255 Program 16
2 Auto program Speed 000 250 Speed, slow to fast
251 255 Sound Active Mode
3 Dimmer 000
255 Adjust the dimmer on auto and
sound programs
4 Strobe 000 255 0-20 Hz, slow to fast
5 Red Zone 1 000 255 0–100%
6 Green Zone 1 000 255 0–100%
7 Blue Zone 1 000 255 0–100%
8 UV Zone 1 000 255 0–100%
9 Red Zone 2 000 255 0–100%
10 Green Zone 2 000 255 0–100%
11 Blue Zone 2 000 255 0–100%
12 UV Zone 2 000 255 0–100%
13 Red Zone 3 000 255 0–100%
14 Green Zone 3 000 255 0–100%
15 Blue Zone 3 000 255 0–100%
16 UV Zone 3 000 255 0–100%
17 Red Zone 4 000 255 0–100%
18 Green Zone 4 000 255 0–100%
19 Blue Zone 4 000 255 0–100%
20 UV Zone 4 000 255 0–100%
21 Red Zone 5 000 255 0–100%
22 Green Zone 5 000 255 0–100%

Page 9 of 16
Wash FX 2 User Manual Rev. 1
OPERATION
8Ch
23 Blue Zone 5 000 255 0–100%
24 UV Zone 5 000 255 0–100%
25 Red Zone 6 000 255 0–100%
26 Green Zone 6 000 255 0–100%
27 Blue Zone 6 000 255 0–100%
28 UV Zone 6 000 255 0–100%
CHANNEL FUNCTION VALUE PERCENT/SETTING
1 Red 000
255 0–100%
2 Green 000 255 0–100%
3 Blue 000 255 0–100%
4 UV 000 255 0–100%
5 Strobe 000 255 0-20 Hz, slow to fast
6 Auto Program
000 005 No function
006 020 Program 1
021 035 Program 2
036 050 Program 3
051 065 Program 4
066 080 Program 5
081 095 Program 6
096 110 Program 7
111 125 Program 8
126 140 Program 9
141 155 Program 10
156 170 Program 11
171 185 Program 12
186 200 Program 13
201 215 Program 14
216 230 Program 15
231 255 Program 16
7 Auto Program Speed 000 250 Speed, slow to fast
251 255 Sound Active Mode
8 Dimmer 000 255 Auto and Sound Programs
CHANNEL FUNCTION VALUE PERCENT/SETTING

Page 10 of 16
OPERATION
Wash FX 2 User Manual Rev. 1
3Ch
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Programs
To run the Wash FX 2 in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select an automatic program, from P 001–025.
4. Press <ENTER>.
Auto-Program Speed
To change the auto-program speed on the Wash FX 2, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S 001–100.
3. Press <ENTER>. The product will return to the last selected mode.
Auto-Program Dimmer
To control the output intensity of the Quad-LEDs while running an auto-program, follow the instructions
below:
1. Press <MENU> repeatedly until diM shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the Quad-LED intensity, from L 000–255.
Sound-Active Mode
To run the Wash FX 2 in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a sound-active program, from Snd1–9.
4. Press <ENTER>.
CHANNEL FUNCTION VALUE PERCENT/SETTING
1 Auto Program
000 005 No function
006 020 Program 1
021 035 Program 2
036 050 Program 3
051 065 Program 4
066 080 Program 5
081 095 Program 6
096 110 Program 7
111 125 Program 8
126 140 Program 9
141 155 Program 10
156 170 Program 11
171 185 Program 12
186 200 Program 13
201 215 Program 14
216 230 Program 15
231 255 Program 16
2 Auto Program Speed 000 250 Speed, slow to fast
251 255 Sound Active Mode
3 Dimmer 000
255 Auto and Sound Programs
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.

Page 11 of 16
Wash FX 2 User Manual Rev. 1
OPERATION
5. Turn the sensitivity knob up until the product responds to the beat of the music.
Sound Sensitivity
To set the sound sensitivity on the Wash FX 2, do the following:
1. Press <MENU> repeatedly until Sens shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from u 001–100.
3. Press <ENTER>.
Preset Color Mode
To run the Wash FX 2 on a static color, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a static color, from C 001–022.
4. Press <ENTER>.
Custom Color Mixing
To custom mix a static color, do the following:
1. Press <MENU> repeatedly until u-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
•r_ _ _ (red)
•g_ _ _ (green)
•b_ _ _ (blue)
•u_ _ _ (UV)
3. Press <ENTER> to cycle through the settings.
4. When the desired setting shows on the display, use <UP> or <DOWN> to increase or decrease
the value, from 0–255 for red, green, blue, or UV.
5. Repeat steps 3 and 4 until the product outputs as desired.
IRC-6 Infrared Remote Control
The Wash FX 2 is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER> to accept.
3. Press <UP> or <DOWN> to select on or oFF.
4. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Of the four colors (red, green, blue, and UV), only three may be used at one time.

Page 12 of 16
OPERATION
Wash FX 2 User Manual Rev. 1
IRC-6 Operation Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to select a sound-active program.
Manual Color Control
• To choose a specific color with the IRC-6:Press any number between
<0>~<9> to choose your color.
To adjust the sound sensitivity:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sound sensitivity.
To manually control the RGB percentage:
1. Press <R> (red), <G> (green), <B> (blue), or <UV>/<P> (UV) to choose
your color.
2. Press <+> or <–> to increase or decrease the percentage of each color.
NOTE: Only three colors can be used at once.
To set all LEDs to full intensity:
• Press <0> on the IRC-6.
Miscellaneous Operation
To adjust the output level of the Quad LEDs in an auto program:
1. Press <%> on the IRC-6.
2. Press <+> or <–> to increase or decrease the output level.
To adjust the strobe rate of the static color:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Set to S 0 to turn off the strobe.
To select a fading program:
• Press <FADE> on the IRC-6. Press it repeatedly to cycle through fading
programs.
To black out the lights:
• Press <BLACK OUT> on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.

Page 13 of 16
Wash FX 2 User Manual Rev. 1
OPERATION
Master/Slave Mode
The Master/Slave mode allows a single Wash FX 2 product (the “master”) to control the actions of one or
more Wash FX 2 products (the “slaves”) without the need of a DMX controller. The master product will be
set to operate in either Stand-Alone mode or with the IRC-6, while the slave products will be set to operate
in Slave mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 3Ch, 8Ch, or 28Ch shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Connect the DMX input of the first slave product to the DMX output of the master product.
5. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave
product.
6. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in Stand-Alone mode or with the IRC-6.
2. Make the master product the first product in the DMX daisy chain.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.

Page 14 of 16
MAINTENANCE
Wash FX 2 User Manual Rev. 1
5. MAINTENANCE
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fans using compressed air because it may damage them.

Page 15 of 16
Wash FX 2 User Manual Rev. 1
TECHNICAL
6. TECHNICAL SPECIFICATIONS
Dimensions and Weight
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Light Source
Photometrics
Thermal
DMX
Ordering
LENGTH WIDTH HEIGHT WEIGHT
12.2 in (310 mm) 5.5 in (140 mm) 9 in (230 mm) 5.8 lb (2.6 kg)
POWER SUPPLY TYPE RANGE VOLTAGE SELECTION
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
PARAMETER 120 V, 60 HZ230 V, 50 HZ
Consumption 145 W 141 W
Operating Current 1.3A 0.6 A
Power linking current (products) 2 A (6 products) 2 A (12 products)
Fuse T 1A, 250 V T 1A, 250 V
POWER I/O U.S./WORLDWIDE UK/EUROPE
Power input connector IEC IEC
Power output connector Edison IEC
Power Cord plug Edison (U.S.) Local Plug
TYPE COLOR QUANTITY POWER CURRENT LIFESPAN
LED Quad-color
RGB+UV 18 6 W 2A 50,000 hours
STROBE RATE ILLUMINANCE @ 2 MPWM FREQUENCY
0 to 25 Hz 1,795 lux (per pod) 78.126 Hz
MAXIMUM EXTERNAL TEMPERATURE COOLING SYSTEM
104 °F (40 °C) Fan-assisted convection
I/O CONNECTOR CHANNEL RANGE
3-pin XLR 3, 8 or 28
PRODUCT NAME ITEM CODE UPC NUMBER
WASHFX2 07051437 781462217853

Page 16 of 17
RETURNS
Wash FX 2 User Manual Rev. 1
RETURNS
In case you need to get support or return a product:
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetdj.com for distributors outside the U.S., UK, Ireland, Mexico, or
Benelux.
Call the corresponding Chauvet Technical Support office and request a Return MerchandiseAuthorization
(RMA) number before shipping the product. Be prepared to provide the model number, serial number, and
a brief description of the cause for the return.
To submit a service request online, go to www.chauvetdj.com/service-request.
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags.
Clearly label the package with the RMAnumber. Chauvet will refuse any product returned without an RMA
number.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet products to
them. Visit our website www.chauvetdj.com for contact details.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).

Page 17 of 17
Wash FX 2 User Manual Rev. 1
CONTACT US
CONTACT US
Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record. Follow the
instructions to request support or to return a product. Visit our website for contact details.
World Headquarters
General Information Technical Support
Address: 5200 NW 108th Ave. Voice: [phone]
Sunrise, FL 33351 Fax: [phone]
Voice: [phone] Email: [email protected]
Fax: [phone] Website
Toll Free: [phone] www.chauvetlighting.com
EUROPE
General Information Technical Support
Address: Stokstraat 18 Email: [e-mail]
9770 Kruishoutem
Belgium Website
Voice: [phone] www.chauvetlighting.eu
General Information Technical Support
Address: Unit 1C Email: [e-mail]
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website
NG16 6NT www.chauvetlighting.co.uk
Voice: [phone]
Fax: [phone]
MEXICO
General Information Technical Support
Address: Av. de las Partidas 34 - 3B Email: [email protected]
Zona Industrial Lerma
(Entrance by Calle 2)
Lerma, Edo. de México, CP 52000 Website
Voice: [phone] www.chauvet.com.mx