Chauvet Professional COLORdash Par-H7XIP User manual

Model ID: COLORDASHPARH7XIP
User Manual

COLORdash Par H7XIP User Manual Rev. 1
Edition Notes
The COLORdash Par H7XIP User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the COLORdash Par H7XIP as of the release
date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and COLORdash are registered trademarks or
trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other
countries. Other company and product names and logos referred to herein may be trademarks of their
respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This COLORdash Par H7XIP User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the latest version.

COLORdash Par H7XIP User Manual Rev. 1
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
FCC Compliance........................................................................................... 1
Safety Notes.................................................................................................. 2
Expected LED Lifespan................................................................................. 3
2. Introduction ................................................................................ 4
Description .................................................................................................... 4
Features........................................................................................................ 4
Product Overview.......................................................................................... 4
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
AC Plug .............................................................................................................. 5
Power Linking..................................................................................................... 5
DMX Linking.................................................................................................. 5
DMX Personalities.............................................................................................. 5
Remote Device Management (RDM) ................................................................. 5
Master/Slave Connectivity.................................................................................. 6
Mounting ....................................................................................................... 6
Orientation.......................................................................................................... 6
Rigging ............................................................................................................... 6
Procedure........................................................................................................... 6
4. Operation .................................................................................... 7
Control Panel Description ............................................................................. 7
Passcode ...................................................................................................... 7
Menu Map ..................................................................................................... 7
Configuration (DMX) ..................................................................................... 10
Control Personalities .......................................................................................... 10
Starting Address................................................................................................. 10
Control Channel Assignments and Values.................................................... 10
Configuration (Standalone) ........................................................................... 12
Fixed Color......................................................................................................... 12
Color Temperature ............................................................................................. 12
Manual Color Mixer ............................................................................................ 12
Auto Show.......................................................................................................... 12
Configuration (Settings) ................................................................................ 12
Master/Slave ...................................................................................................... 12
Dimmer Speed ................................................................................................... 12
White Balance .................................................................................................... 13
LED Frequency .................................................................................................. 13

Table of Contents
COLORdash Par H7XIP User Manual Rev. 1
ii
Back Light .......................................................................................................... 13
Key Lock ............................................................................................................ 13
Information ......................................................................................................... 13
Factory Reset..................................................................................................... 13
System Update................................................................................................... 13
5. Maintenance................................................................................ 14
Product Maintenance .................................................................................... 14
6. Technical Specifications ........................................................... 15
Contact Us ...................................................................................... 16
Warranty & Returns....................................................................................... 16

1
COLORdash Par H7XIP User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
• COLORdash Par H7XIP
• Seetronic Powerkon IP65 power cable
• Gel frame holder (6.5 in /165 mm)
• Gel frame
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function correctly
if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

2
Before You Begin
COLORdash Par H7XIP User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer
than 3.28 ft (1 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special
cord or cord exclusively available from the manufacturer or its service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or its service
agent or a similar qualified person.
• The luminaire is intended for professional use only.
• CAUTION:
• This product’s housing may be hot when operating. Mount this product in a location with adequate
ventilation, at least 20 in (50 cm) from adjacent surfaces.
• When transferring the product from extreme temperature environments, (e.g., cold truck to warm
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing
a failure, allow the product to fully acclimate to the surrounding environment before connecting it to
power.
• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding
notification of strobe use.
• ALWAYS:
• Disconnect from power before cleaning the product.
• When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power
and data cable.
• Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in
use.
• Use a safety cable when mounting this product overhead.
• Connect this product to a grounded and protected circuit.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.

3
COLORdash Par H7XIP User Manual Rev. 1
Before You Begin
•DONOT:
• Open this product. It contains no user-serviceable parts.
• Look at the light source when the product is on.
• Leave any flammable material within 50 cm of this product while operating or connected to power.
• Connect this product to a dimmer or rheostat.
• Operate this product if the housing, lenses, or cables appear damaged.
• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation
is fine.
• Permanently install outdoors in locations with extreme environmental conditions. This includes, but
is not limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where normal temperatures exceed the temperature ranges in this manual.
• Locations that are prone to flooding or being buried in snow.
• Other areas where the product will be subject to extreme radiation or caustic substances.
• ONLY use the hanging/mounting bracket to carry this product.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher
temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower
temperatures.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• In the event of a serious operating problem, stop using immediately.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.
If a Chauvet product requires service, contact Chauvet Technical Support.

4
Introduction
COLORdash Par H7XIP User Manual Rev. 1
2. Introduction
Description
The COLORdash Par H7XIP is a 7.4 pound die-cast portable RGBAW+UV LED wash with a precise
palette of subtle to saturated colors. Smooth 16-bit fading on four selectable dimming profiles, and multiple
PWM frequencies for flicker-free output, make the COLORdash Par H7XIP the perfect choice whether in
the rig, on the floor, inside, outside, live, or on camera. Program easily through the OLED display or at a
distance via RDM.
Features
• Rugged RGBWA-UV LED wash for events where indoor/outdoor flexibility is needed
• At home in any weather conditions with IP rated power and DMX connections
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
• RDM (Remote Device Management) for added flexibility
• Selectable, smooth dimming curves for eliminate flicker and choppiness in fades
• Easy to read OLED display with password protection and touchscreen interface
• Advanced optics provide exceptional color mixing and high efficiency
• Double-bracketed yoke with omega bracket doubles as floor stand
Product Overview
Product Dimensions
Menu
buttons
OLED
display
DMX
in/out
Gel frame holder clip
Power
in/out
Safety cable
pass-through
Humidity
control valve
9.8 in
248.1 mm
9.6 in
243.4 mm
6.7 in
170 mm

5
COLORdash Par H7XIP User Manual Rev. 1
Setup
3. Setup
AC Power
The COLORdash Par H7XIP has an auto-ranging power supply and it can work with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
AC Plug
The COLORdash Par H7XIP comes with a power input cable terminated with a Seetronic Powerkon A
connector on one end and an Edison plug on the other end (U.S. market). If the power input cable that
came
with the product has no plug, or if the plug needs to be changed, use the table below to wire a plug.
Power Linking
It is possible to power link up to 16 COLORdash Par H7XIP products at 100 V, 19 products at 120 V, 34
products at 208 V, 37 products at 230 V, or up to 38 products at 240 V. Never exceed this number. Power-
linking cables can be purchased separately.
DMX Linking
The COLORdash Par H7XIP can be linked to a DMX controller using a 3- or 5-pin DMX connection. If
using other DMX-compatible products with this product, it’s possible to control each individually with a
single DMX controller.
DMX Personalities
The COLORdash Par H7XIP uses a 3- or 5-pin DMX data connection for the 6CH, 8CH, 9CH, 13CH, and
14CH DMX personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the COLORdash Par H7XIP to work in
these personalities.
•TheControl Channel Assignments and Values section provides detailed information regarding the
DMX personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The COLORdash Par H7XIP supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.

6
Setup
COLORdash Par H7XIP User Manual Rev. 1
Master/Slave Connectivity
The Master/Slave mode allows an COLORdash Par H7XIP (the master) to control one or more
COLORdash Par H7XIP products (the slaves) without a DMX controller. One COLORdash Par H7XIP
becomes the master when running an auto program or in Static mode.
Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The COLORdash Par H7XIP comes with an adjustable yoke to which a mounting clamp (sold separately)
can be directly attached. Make sure the clamp is capable of supporting the weight of this product. For the
Chauvet Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
•TheOperation section of this manual provides detailed instructions on how to
configure the master and slaves.
•For more information about DMX standards or the DMX cables needed to link this product
to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.
Safety
cable
Mounting clamp
Overhead mounting Surface mounting