Chauvet Professional Amhaze Whisper User manual

User Manual

Amhaze Whisper User Manual Rev. 8
Edition Notes
The Amhaze Whisper User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Amhaze Whisper as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and Amhaze are registered trademarks or trademarks
of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This Amhaze Whisper User Manual is the 8th edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Amhaze Whisper User Manual Rev. 8
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
Personal Safety.................................................................................................. 2
Mounting and Rigging ........................................................................................ 2
Power and Wiring............................................................................................... 2
Operation ........................................................................................................... 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
AC Plug .............................................................................................................. 5
DMX Linking.................................................................................................. 5
Preparing for Operation................................................................................. 5
Mounting ....................................................................................................... 6
Orientation.......................................................................................................... 6
Rigging ............................................................................................................... 6
Procedure........................................................................................................... 6
4. Operation .................................................................................... 7
Control Panel Description ............................................................................. 7
Control Options ............................................................................................. 7
Programming................................................................................................. 7
Menu Map ..................................................................................................... 7
Configuration (DMX) ..................................................................................... 7
DMX Control....................................................................................................... 7
Control Channel Assignments and Values.................................................... 7
Configuration (Settings) ................................................................................ 8
Interval ............................................................................................................... 8
Duration.............................................................................................................. 8
Priming the Pump.......................................................................................... 8
5. Maintenance................................................................................ 9
Product Maintenance .................................................................................... 9
Storing the Product ....................................................................................... 9
6. Technical Specifications ........................................................... 10
Contact Us ...................................................................................... 11
Warranty & Returns....................................................................................... 11

1
Before You Begin
Amhaze Whisper User Manual Rev. 8
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
• Amhaze Whisper
• Seetronic Powerkon IP65 power cable
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function correctly
if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of Seetronic
IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

2
Amhaze Whisper User Manual Rev. 8
Before You Begin
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Depending on the amount of haze generated, all haze machines may set off smoke detectors.
• Drain the tank before transporting the product.
• Always disconnect this product from its power source before servicing.
• The product’s nozzle is very hot during operation and it remains hot for a long time after operation
has stopped.
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
• Do not drink or become in contact with the fluid. If you do, call your local emergency service (911 in
the US) for help.
• Do not use for space heating purposes.
• Do not touch this product’s housing during operation because it may be very hot.
Mounting and Rigging
• The product is not intended for permanent installation.
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20)
• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to this product while it is operating.
• When hanging this product, always secure to a fastening device using a safety cable.
Power and Wiring
• Always make sure you are connecting this product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect this product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if you see damage to the housing, fluid tank, or cables. Have the
damaged parts replaced by an authorized technician at once.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never carry the product from the power cord or any moving part. Always use the handles.
• The haze exits the nozzle at a very high temperature and it remains hot for a long time after
operation has stopped. Keep a minimum distance of 6.5 ft (2 m) from the nozzle to the nearest
object.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a higher
temperature.
• In the event of a serious operating problem, stop using this product immediately!
• Do not add perfume, alcohol, gasoline, or any other flammables to the fluid.
• Use only CHAUVET water-based Premium Haze Fluid (PHF).
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
If your Chauvet product requires service, contact Chauvet Technical Support.

3
Introduction
Amhaze Whisper User Manual Rev. 8
2. Introduction
Description
The Amhaze Whisper is an ideal haze machine for use in television studios and theatrical productions
where discreet operation and rapid heat up time are key. The speed of the fan is controllable and the
volume of haze fully adjustable up to a maximum of 77 cfm.
Features
• Professional water-based haze machine
• Quiet operation for theatrical and studio usage
• Removable vent louver for directional haze flow
• Tour-ready with a rugged road case and M12 threaded rigging insert
• Achieve continuous variable haze output and blower speed, adjusted via DMX or manual knobs
Product Overview
Air Intake Vent
Foot
Control Panel
Nozzle
DMX Input
Fluid Tank
Fog Output
Mounting Point
Handle
Fluid Hose
Fan Control
Volume Control
DMX Output
Breaker Power

4
Amhaze Whisper User Manual Rev. 8
Introduction
Product Dimensions
10.62 in
270 mm
19.29 in
490 mm
14.96 in
380 mm

5
Setup
Amhaze Whisper User Manual Rev. 8
3. Setup
AC Power
The Amhaze Whisper has an auto-ranging power supply and it can work with an input voltage range of 100
to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
AC Plug
The Amhaze Whisper comes with a power input cable terminated with a Seetronic Powerkon A connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the
product has no plug, or if the plug must be changed, use the table below to wire a plug.
DMX Linking
The Amhaze Whisper will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX
Primer is available from www.chauvetprofessional.com.
Preparing for Operation
To prepare the Amhaze Whisper for operation:
1. Open the flight case.
2. Pull out the fluid tank and remove the cap.
3. Verify that the two plastic hoses attached to the inside of the cap are in place and in good
condition.
4. Pour Chauvet PHF haze fluid inside the tank, and re-cap.
5. Reinsert the tank.
6. Make sure that the plastic hose that goes from the cap to the hazer is not bent.
7. Plug in power and wait approximately 30 seconds for warm-up to complete.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Only use Chauvet approved PHF haze fluid. Otherwise, results may not be satisfactory. In
addition, unapproved fluid can damage the Amhaze Whisper or cause harm to humans or
animals.
When storing the product, ALWAYS be sure to store the fluid tank with the cap up (See
Storing the Product) before installing the front cover to avoid tube damage that may cause
leakage.

6
Amhaze Whisper User Manual Rev. 8
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The Amhaze Whisper includes 4 rubber feet for floor mounting and comes with a threaded mounting hole,
size M12, at the top of the hazer. This mounting hole is appropriate for use with a mounting clamp. You
must supply the mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. Use at least one mounting point per product. For the Chauvet Professional line of mounting
clamps, go to http://www.trusst.com/products.
Mounting Diagram
M12 threaded insert Safety cable
(such as CH-05
from Chauvet)
Mounting clamp
(such as CLP-15 or
CLP-15N from Chauvet)

7
Operation
Amhaze Whisper User Manual Rev. 8
4. Operation
Control Panel Description
Control Options
Set the Amhaze Whisper starting address in the 001-512 DMX range. This enables control of up to 256
products in the 2-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <FUNCTION> repeatedly until the option shows on the
display. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until the
option shows on the display. If there is another programming level, you will see that first option, or
you will see the selected value.
Press <FUNCTION> repeatedly to exit to the previous main level.
Menu Map
Refer to the Amhaze Whisper product page on www.chauvetprofessional.com for the latest menu map.
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1. Go to DMX Add. main level.
2. Select the starting address (001–512).
Control Channel Assignments and Values
Button Function
<FUNCTION> Exits from the current menu or function
<MANUAL> Manual control haze output
<VOLUME> Haze volume output control
<TIMER> Timed haze output
<FAN> Fan output control
<UP> Navigates upward through the menu list or increases the numeric value when in a
function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a
function
Main Level Programming Levels Description
DMX Add. 000–512 Selects DMX address (highest channel restricted to
personality chosen).
Interval Set 10–300 Sets the Interval between haze bursts
Duration Set 10–255 Sets how long the burst of haze will last
Channel Function Value Percent/Setting
1 Fan speed 000 005 No function
006 255 Fan speed, slow to fast
2 Haze volume 000 005 No function
006 255 Haze volume, 0–100%

8
Amhaze Whisper User Manual Rev. 8
Operation
Configuration (Settings)
Use standalone configuration to operate the product without a DMX controller.
Interval
1. Go to the Interval Set main level.
2. Select the desired speed (10–300).
Duration
1. Go to the Duration Set main level.
2. Select how long the haze flow will last (10–255).
Priming the Pump
The Amhaze Whisper features an automatic shut-off function. When the fluid sensor detects no fluid in the
hose, the pump automatically shuts off. Sometimes an air bubble can be caught in the hose by the fluid
sensor, triggering the auto shut-off. To prevent this, the pump must be primed every time the reservoir is
refilled from empty and/or every time the hose runs dry.
To prime the pump and remove all air bubbles:
1. Ensure the filter tip of the hose is fully submerged in the fluid.
2. Run the Amhaze Whisper on low haze volume.
3. With two fingers, pinch the hose closed so nothing can pass through.
4. Keep the hose pinched closed for 20–30 seconds. The pump will make a noise that will slowly get
louder.
5. After at least 20–30 seconds, release the hose. Fluid should pass quickly through it, preventing
any bubbles from becoming trapped.
DO NOT use fingernails or anything which may cut the hose!
The pump must be primed every time the reservoir is refilled or the hose runs dry.

9
Maintenance
Amhaze Whisper User Manual Rev. 8
5. Maintenance
Product Maintenance
Do not allow the haze machine to become clogged. After every 40 hours of continuous operation, use
CHAUVET Fog Cleaner Quart (FCQ) through the system to prevent the accumulation of particulate matter
in the heating element.
The recommended cleaning procedure is as follows.
1. Unplug the product from power.
2. Empty all fluid from the machine.
3. Add cleaning solution to the tank.
4. Connect the product to power and allow it to warm up.
5. Run the unit in a well-ventilated area until the tank is empty.
6. Refill with fluid to continue using the hazer. Run the machine briefly to clear any cleaning solution
from the pump and heater.
Storing the Product
Before storing the hazer:
• Run FCQ through the system as described in the cleaning procedure above; however, only follow
steps 1 through 5. Do not refill the tank with fluid if storing the hazer. Cleaning the system prior to
storage will help prevent any particles from condensing inside the pump or heater while not in use.
• Be sure that the fluid container is placed inside the product correctly with the cap facing up.
• FCQ (Fog Cleaner Quart) was specifically developed by CHAUVET to clean the
Amhaze Whisper. Make sure to use FCQ regularly to increase the life of the hazer.
• Test-run the Amhaze Whisper on a monthly basis to achieve the best performance.
Do not spin the fans with compressed air. Damage may result.
Do not refill the tank with fluid if storing the hazer.
Cap
Cap
Cap

10
Amhaze Whisper User Manual Rev. 8
Technical Specifications
6. Technical Specifications
Dimensions and Weight
Note: Dimensions in inches are rounded.
Power
Operation/Capacity/Consumption
Thermal
DMX
Ordering
Length Width Height Weight
19.29 in (490 mm) 14.96 in (380 mm) 10.62 in (270 mm) 34.1 lb (15.5 kg)
Power Supply Type Range Voltage Selection
Model-specific 120 VAC, 60 Hz or
230 VAC, 50 Hz Fixed
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption 1070 W 1285 W
Operating current 8.5 A 5.6 A
Breaker F 15 A, 250 V F 8 A, 250 V
Power I/O U.S./Worldwide UK/Europe
Power input connector Seetronic Powerkon IP65 Seetronic Powerkon IP65
Power cable plug Edison (U.S.) Local Plug
Heat-up Time Tank Capacity Fluid Consumption Fan Speed
30 sec 0.92 gal (3.5 l) 7 ml/min 77 cfm
Maximum External Temperature Cooling System
113 °F (45 °C) Convection
I/O Connector Channel Range
3- or 5-pin XLR 2
Product Name Item Code UPC Number
Amhaze Whisper 0507126 781462216115
Amhaze Whisper (220 V) 05071292 781462216405

11
Contact Us
Amhaze Whisper User Manual Rev. 8
Contact Us
Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration.
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd. Voice: [phone]
Davie, FL 33314 Fax: [phone]
Voice: [phone] Email: [email protected]
Fax: [phone]
Toll Free: [phone] Website: www.chauvetprofessional.com
Chauvet U.K.
Address: Unit 1C Email: [e-mail]
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu
NG16 6NT
Voice: [phone]
Fax: [phone]
Chauvet Benelux
Address: Stokstraat 18 Email: [email protected]
9770 Kruishoutem
Belgium Website: www.chauvetprofessional.eu
Voice: [phone]
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
Email: [email protected]
France Website: www.chauvetprofessional.eu
Voice: [phone]
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Email: [email protected]e
Germany Website: www.chauvetprofessional.eu
Voice: [phone]
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
(Entrance by Calle 2)
Email: [email protected]
Zona Industrial Lerma Website: www.chauvetprofessional.mx
Lerma, Edo. de México, CP 52000
Voice: [phone]