Chauvet Sparklite LED User manual

User Manual

Edition Notes
SparkliteLED™ User Manual - Rev. 02c April 8, 2010
Edition
Notes
CHAUVET® released this edition of the SparkliteLED™ User Manual Rev. 02c in April
2010. The SparkliteLED™ User Manual Rev. 02c covers the description, safety
precautions, installation, programming and maintenance of the CHAUVET®
SparkliteLED™ lighting fixture.
Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and the
dotted triangle, and all other trademarks on this manual
pertaining to services,
products or marketing statements (example: It’s Green Thinking™
) are owned or
licensed by CHAUVET®. Any other product names, logos, brands, company names
and other trademarks featured or referred to within this document are the property of
their respective trademark holders.
Copyright
Notice
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks and resources.
© Copyright 2010 CHAUVET®
All rights reserved
Electronically published by CHAUVET® in the United States of America
Manual
Usage
CHAUVET® authorizes its
customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification or printing of this manual or its content for any
other purpose without its written consent.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content of this document to A4 paper.
Intended
Audience
Any person in charge of installing, operating and/or maintaining the SparkliteLED™
should read the Guide that shipped with it and this manual in their entirety before
installing, operating or maintaining this product.
Disclaimers
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or omissions
in this document. CHAUVET® reserves the right to revise this document and to make
changes from time to time in the content hereof without obligation of CHAUVET® to
notify any person or company of such revision or changes. This does not constitute in
any way a commitment by CHAUVET® to make such changes. CHAUVET® may
issue a revision of this manual or a new edition of it to incorporate such changes.
CHAUVET®
Publications
Hot Line
If you have any comments about the accuracy of this document or general suggestions
regarding how we can improve it, please call us at [phone] (US callers) or +1-
954-929-1115 (international callers), ext. 43. You can download the latest versions of
all CHAUVET® products’ manuals from www.chauvetlighting.com.
Document
Revision
The SparkliteLED™ User Manual Rev. 02c supersedes all previous versions of this
manual. Please discard any older versions of this manual you may have, whether in
printed or electronic format, and replace them with this version.
Fixture at
a Glance
Use on Dimmer Auto Programs
Outdoor Use Auto-ranging
Power Supply
Sound Activated Replaceable Fuse
DMX User Serviceable
Master/Slave Duty Cycle

Table of Contents
April 8, 2010 a SparkliteLED™ User Manual - Rev. 02c
TABLE OF CONTENTS
1. Before you Begin ...................................................................................................................................... 1
WHAT IS INCLUDED.....................................................................................................................................................................................1
Controller..................................................................................................................................................................1
Drape (sold separately).............................................................................................................................................1
UNPACKING INSTRUCTIONS .........................................................................................................................................................................1
TEXT CONVENTIONS...................................................................................................................................................................................1
ICONS .......................................................................................................................................................................................................1
SAFETY INSTRUCTIONS...............................................................................................................................................................................2
2. Introduction............................................................................................................................................... 3
SYSTEM DESCRIPTION................................................................................................................................................................................3
Controller Features...................................................................................................................................................3
Drape Features.........................................................................................................................................................3
CONNECTIVITY...........................................................................................................................................................................................4
DMX 12 Channel Mode.............................................................................................................................................4
DMX 24 Channel Mode.............................................................................................................................................4
SparkliteLED™ Serial Link........................................................................................................................................4
DMXCHANNEL SUMMARY..........................................................................................................................................................................5
12 Channel Mode......................................................................................................................................................5
24 Channel Mode......................................................................................................................................................5
PRODUCT DIMENSIONS...............................................................................................................................................................................6
SparkliteLED™ Controller.........................................................................................................................................6
SparkliteLED™ Drape...............................................................................................................................................7
SparkliteLED™ Driver Box........................................................................................................................................7
3. Setup.......................................................................................................................................................... 8
ACPOWER................................................................................................................................................................................................8
Fuse Replacement....................................................................................................................................................8
Power Linking...........................................................................................................................................................8
FIXTURE LINKING........................................................................................................................................................................................9
DMX Data Connection..............................................................................................................................................9
SparkliteLED™ Serial Link......................................................................................................................................10
Master/Slave Fixture Linking...................................................................................................................................11
MOUNTING...............................................................................................................................................................................................12
Orientation..............................................................................................................................................................12
Rigging ...................................................................................................................................................................12
SparkliteLED™ Controller.......................................................................................................................................12
SparkliteLED™ Drape.............................................................................................................................................12
4. Operating Instructions ........................................................................................................................... 13
CONTROL PANEL......................................................................................................................................................................................13
Navigation Functions ..............................................................................................................................................13
Menu Map Description............................................................................................................................................13
PROGRAMMING PROCEDURE.....................................................................................................................................................................13
12-Channel DMX Mode...........................................................................................................................................13
24-Channel DMX Mode...........................................................................................................................................14
Auto Mode Playing..................................................................................................................................................14
Auto Mode Programming........................................................................................................................................ 14
Exiting Auto Mode Programming.............................................................................................................................16
Master/Slave Mode.................................................................................................................................................16
Settings .................................................................................................................................................................. 16
MENU MAP..............................................................................................................................................................................................17
DMXCHANNEL VALUES ...........................................................................................................................................................................18
12-Channel Mode ...................................................................................................................................................18
24-Channel Mode ...................................................................................................................................................19
5. Technical Information............................................................................................................................. 20
GENERALMAINTENANCE...........................................................................................................................................................................20
SPARKLITELED™SERVICE MAINTENANCE GUIDE ......................................................................................................................................21
EXPLODED VIEW (CONTROLLER) ...............................................................................................................................................................22
EXPLODED VIEW (DRAPE AND DRIVER)......................................................................................................................................................23
RETURNS PROCEDURE .............................................................................................................................................................................24

Table of Contents
SparkliteLED™ User Manual - Rev. 02c b April 8, 2010
CLAIMS ...................................................................................................................................................................................................24
CONTACT US...........................................................................................................................................................................................24
TECHNICAL SPECIFICATIONS .....................................................................................................................................................................25
6. Appendix.................................................................................................................................................. 26
DMXPRIMER..........................................................................................................................................................................................26
The Physical Medium ............................................................................................................................................. 26
The Signals............................................................................................................................................................. 26
The Functions......................................................................................................................................................... 26
DMXCONFIGURATION..............................................................................................................................................................................26
Personalities........................................................................................................................................................... 26
Starting Address..................................................................................................................................................... 26
Assigning Addresses.............................................................................................................................................. 27
DMX Universes....................................................................................................................................................... 27
DMXCONNECTIVITY................................................................................................................................................................................27
Fixture Location...................................................................................................................................................... 27
Number of Fixtures................................................................................................................................................. 27
DMX Data Cabling.................................................................................................................................................. 27
Making your Own DMX Cable................................................................................................................................. 27
DMX Cable Characteristics..................................................................................................................................... 27
DMX Cable Connectors.......................................................................................................................................... 28
3-Pin to 5-Pin Conversion Chart ............................................................................................................................. 28
DMX Connection..................................................................................................................................................... 28
MASTER/SLAVE LINKING...........................................................................................................................................................................29
Master/Slave Connection........................................................................................................................................ 29
IDADDRESSING.......................................................................................................................................................................................30
Single Row Connection........................................................................................................................................... 30
Standard Block Connection .................................................................................................................................... 30
Repeated Row Block Connection ........................................................................................................................... 30
Other Effects .......................................................................................................................................................... 30
SIZING THE CIRCUIT BREAKERS.................................................................................................................................................................31
Using the Spec Sticker ........................................................................................................................................... 31
Using the Watts/Volts Method................................................................................................................................. 31
Considering the Power Factor................................................................................................................................. 31
Using the Volt Amps Method .................................................................................................................................. 31
Selecting the Circuit Breaker .................................................................................................................................. 31

Before you Begin
April 8, 2010 1 SparkliteLED™ User Manual - Rev. 02c
1. Before you Begin
What is Included
Controller
•SparkliteLED™ Controller
•Power Cord
•Warranty Card
•User Manual
Drape (sold
separately)
•SparkliteLED™ Drape (in a road case)
•Drape link cable (50 feet)
•Warranty Card
Unpacking
Instructions
Immediately upon receiving the fixture, carefully unpack the carton or the road
case, check the contents to ensure that all parts are present, and have been
received in good condition. If any parts appear damaged from shipping or the
carton itself shows signs of mishandling, notify the shipper immediately. In addition,
retain the box or road case and all the packing material for inspection.
In any event, save the carton and all packing material because, in case that you
have to return the fixture to the factory, you will have to return it in its original
factory box or road case, and packing.
Text
Conventions
CONVENTION MEANING
1~512 A range of values
50/60 A set of mutually exclusive values in the text
[10] A DIP switch to be configured
<SET> A key to be pressed on the fixture’s control panel
Settings A menu option that can be selected but not modified
MENU > Settings A sequence of menu options to be followed
[1~10] A range of menu values of which one can be selected
Yes/No A set of mutually exclusive menu options to choose
ON A value to be entered or selected
Icons ICONS MEANING
This paragraph contains critical installation, configuration
or operation information. Failure to comply with this
information may render the fixture partially or completely
inoperative, cause damage to the fixture or cause harm to
the user.
This paragraph contains important installation or
configuration information. Failure to comply with this
information may prevent the fixture from functioning
correctly.
This paragraph reminds you of useful, although not critical,
information.

Before you Begin
SparkliteLED™ User Manual - Rev. 02c 2 April 8, 2010
Safety
Instructions
Please read the following safety instructions carefully because they include
important safety information about the installation, usage and maintenance of this
product.
There are no user serviceable parts inside the SparkliteLED™ controller or
drape(s). Any reference to servicing them you may find from now on in this
User Manual will only apply to properly CHAUVET® certified technicians. Do
not open the controller or driver housing, or attempt any repairs, unless you
are one of those technicians.
In the unlikely event that this fixture may require service, please contact
CHAUVET® Technical Support at once.
•Keep this manual for future consultation. If you sell the fixture to another user,
make sure that they also receive this manual.
•Always make sure that you are connecting the SparkliteLED™ controller to the
proper voltage, as per the specifications in this manual or on the controller.
•Always disconnect the SparkliteLED™ controller and drape(s) from the power
source before servicing.
•This product is for indoor use only! To prevent risk of fire or shock, do not
expose the fixture to rain or moisture.
•Make sure there are no flammable materials close to the SparkliteLED™
controller or drape(s) while operating.
•Always secure the SparkliteLED™ drape(s) to a fastening device using a safety
chain. Do the same with the SparkliteLED™ controller if hanging it.
•Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the fixture
at a higher temperature.
•In the event of a serious operating problem, stop using the fixture immediately!
•Never connect the SparkliteLED™ controller to a dimmer pack.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the power cord by pulling or tugging on the cord.
•Avoid direct eye exposure to the light sources while they are on.
Please refer to all applicable local codes and regulations for proper
installation of this fixture.

Introduction
April 8, 2010 3 SparkliteLED™ User Manual - Rev. 02c
2. Introduction
System
Description
The SparkliteLED™ fixture consists of a SparkliteLED™ controller and up to four
SparkliteLED™ drapes per controller. The SparkliteLED™ controller ships with no
drapes. Therefore, the user will have to order the SparkliteLED™ drapes
separately.
The SparkliteLED™ controller has a DMX Input, a DMX Output, a Link Out and four
Drape (1~4) connectors. In addition, the SparkliteLED™ controller has a control
panel with a two-row LCD display from where the user can set up the controller’s
operation mode to DMX 12-Channel, DMX 24-Channel or Master/Slave mode as
well as configure the auto-programs and select the fixture’s settings.
Each SparkliteLED™ drape has an LED driver box that controls eight groups of 16
RGB LEDs each, with a total of 128 LEDs per drape.
Despite having individual outputs for each drape, all four SparkliteLED™
drapes connected to the same SparkliteLED™ controller will show the same
colors and effects since they all share the same data.
Controller Features
•12 or 24-channel DMX control
•Operating modes
12-channel: LED sparking direction control, color mode, color macro,
strobe, auto program, On/Off
24-channel: RGB control per LED group
•RGB color mixing with or without DMX controller
•Recall custom programs via master/slave or DMX
•User configurable Auto Programs
•Configurable LED sparking direction and speed
•Configurable LED group sparking overlap time
•Configurable LED minimum and maximum luminosity
•Configurable color sets
•Master/Slave (proprietary serial link)
•Control panel with LCD display
•Static Playing
Drape Features •128 ¼ W RGB LEDs, arranged in eight groups of 16 LEDs each
•Fire retardant treatment
•Shipped in a flight case for extra protection

Introduction
SparkliteLED™ User Manual - Rev. 02c 4 April 8, 2010
Connectivity
The user can link two or more SparkliteLED™ controllers using one of two
connection methods, standard DMX connection or proprietary serial link. However,
choosing the connection method depends on the DMX mode selected.
DMX 12 Channel
Mode
The DMX 12-Channel mode allows each SparkliteLED™ controller to make their
respective SparkliteLED™ drapes to show various preconfigured combinations
sparking modes, colors and intensities as well as specific automatic programs.
When using multiple SparkliteLED™ controllers, the DMX 12 Channel mode can
only run if the SparkliteLED™ controllers use the proprietary serial link connection
(see the Setup chapter for more information on this type of connection).
Select the DMX 12-channel mode for applications in which the SparkliteLED™
will run automatically. In this mode, you will be able to select any of the LED
sparking modes and color combinations from a DMX controller.
However, keep in mind that the changes you make from the DMX controller
will become active once the current sequence ends, which may take a few
seconds.
DMX 24 Channel
Mode
The DMX 24-Channel mode allows each SparkliteLED™ controller to determine the
RGB color for each of the eight LED groups on the drapes.
When using multiple SparkliteLED™ controllers, the DMX 24 Channel mode can
run on any of the two connection modes, standard DMX or proprietary serial link
(see the Setup chapter for more information on these types of connections).
If using the standard DMX connection, each SparkliteLED™ controller can have its
own starting address for a more detailed control of the show (see the Appendix
chapter for more information on DMX starting address). Alternatively, all the
SparkliteLED™ controllers can share the same starting address to provide a
synchronized show, which would also require less channels on the DMX controller.
However, for synchronized shows, the proprietary serial link provides a faster
alternative.
Select the DMX 24-channel mode for applications in which the SparkliteLED™
will run manually from a DMX controller. In this mode, you will be able to
select manually each color combination from a DMX controller. These
changes will be effective immediately because there is no program running in
the background.
However, keep in mind that you will not have access to any preprogrammed
function on the SparkliteLED™ when in the 24-channel mode.
SparkliteLED™
Serial Link
The SparkliteLED™ proprietary serial link connection method uses a Master/Slave
configuration and a separate signal output (Link Out) on each controller. The first
SparkliteLED™ controller in the serial link is the only one seen by the DMX
controller. Therefore, this one is the only SparkliteLED™ controller in the group
requiring a DMX starting address (see the Appendix chapter for more information on
DMX starting address). The other SparkliteLED™ controllers are slaves of the first
SparkliteLED™ controller (see the Setup chapter for more information on this type
of connection).
The proprietary serial link is the connection method used with the DMX 12-Channel
and Master/Slave modes.

Introduction
April 8, 2010 5 SparkliteLED™ User Manual - Rev. 02c
DMX Channel Summary
12 Channel Mode
CHANNEL FUNCTION
1 LED sparkling mode (1~7) or Strobe
2 Color overlap time (Mode 1~7) or strobe frequency (Strobe)
3 Color change speed
4 Minimum LED intensity
5 Maximum LED intensity
6 Static or dynamic color mode (1~4) selection
7 Color 1 selection
8 Color 2 selection
9 Color 3 selection
10 Color 4 selection
11 Program selection (1~8)
12 Drape(s) On/Off
24 Channel Mode
CHANNEL FUNCTION
1 1st Group Red Color
2 1st Group Green Color
3 1st Group Blue Color
4 2nd Group Red Color
5 2nd Group Green Color
6 2nd Group Blue Color
7 3rd Group Red Color
8 3rd Group Green Color
9 3rd Group Blue Color
10 4th Group Red Color
11 4th Group Green Color
12 4th Group Blue Color
13 5th Group Red Color
14 5th Group Green Color
15 5th Group Blue Color
16 6th Group Red Color
17 6th Group Green Color
18 6th Group Blue Color
19 7th Group Red Color
20 7th Group Green Color
21 7th Group Blue Color
22 8th Group Red Color
23 8th Group Green Color
24 8th Group Blue Color

Introduction
SparkliteLED™ User Manual - Rev. 02c 6 April 8, 2010
Product Dimensions
SparkliteLED™ Controller
Fuse Holder
Power Input
DMX In
DMX Out
On/Off Switch
Link Out
Power
Indicator
Control
Panel
Drape Out
Connectors
DMX Signal
Indicator

Introduction
April 8, 2010 7 SparkliteLED™ User Manual - Rev. 02c
SparkliteLED™ Drape
SparkliteLED™ Driver Box
LED Group
Outputs
Mounting
Grommet
LEDs

Setup
SparkliteLED™ User Manual - Rev. 02c 8 April 8, 2010
3. Setup
AC Power
This fixture has an auto-ranging power supply that can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
Always connect the fixture to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To determine the power requirements for this fixture, see the label affixed to the
side of the fixture controller or refer to the fixture’s specifications chart. The listed
current rating indicates its maximum current draw with all four drapes installed and
all LEDs in white color (RGB at 100%). Please refer to the Sizing the Circuit
Breakers section in the Appendix chapter.
Never connect the fixture to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse Replacement
•With a flat head screwdriver, wedge the fuse holder out of its housing and
remove the blown fuse from its holder.
•Replace the blown fuse with a fuse of the exact same type and rating.
•Insert the fuse holder back in its place, and reconnect power.
Disconnect the power cord before replacing the fuse and always replace it
with a fuse of the same type and rating.
Power Linking
The SparkliteLED™ controller provides no power linking to other units. Therefore, in
an installation with more than one SparkliteLED™ controller, you will have to
provide power to each unit.
The fuse is located
inside this compartment.
Remove it using a flat
head screwdriver.

Setup
April 8, 2010 9 SparkliteLED™ User Manual - Rev. 02c
Fixture Linking
The SparkliteLED™ controller can operate in any of two modes, 12-channel or 24-
channel. In both cases, the SparkliteLED™ controller links to a DMX controller and t
other DMX compatible fixtures using DMX links. However, it is important to pay
attention to the connection method for each of these modes.
If you are not familiar with the DMX standard, please refer to the Appendix
chapter to learn more about it.
DMX Data
Connection
The SparkliteLED™ uses the standard DMX data connection for its DMX 24-
Channel mode. See the Introduction chapter for a description of the DMX 24-
Channel mode and the Operation Instructions chapter to learn how to configure the
SparkliteLED™ controller appropriately for this mode.
Procedure
1. Connect the first DMX cable to between the DMX Output connector of the DMX
controller and the DMX Input connector of the first SparkliteLED™ controller.
2. Connect the second DMX cable as shown in the figure below.
3. Continue linking the other SparkliteLED™ controllers in the same way.
DMX Data
Connection
Diagram
2nd SparkliteLED™
1st SparkliteLED™
DMX
Output
DMX
Input
DMX
Input
DMX
Output
Universal
DMX
Controller
1st DMX
Cable
2
nd
DMX
Cable
Drape
1
Drape
2
Drape
3
Drape
4
Drape
1
Drape
2
Drape
3
Drape
4
3rd DMX
Cable
Next
SparkliteLED™

Setup
SparkliteLED™ User Manual - Rev. 02c 10 April 8, 2010
SparkliteLED™
Serial Link
The SparkliteLED™ uses the proprietary serial link (Link Output to DMX Input) for
its DMX 12/24 Channel mode. See the Introduction chapter for a description of the
serial link and the Operating Instructions chapter to learn how to configure the
SparkliteLED™ controller.
Procedure
1. Connect the first DMX cable to between the DMX Output connector of the DMX
controller and the DMX Input connector of the first SparkliteLED™ controller.
2. Connect the second DMX cable as shown in the figure below. Note that you have
to use the Link Output connector.
3. Continue linking the other SparkliteLED™ controllers in the same way.
SparkliteLED™
Serial Link
Diagram
2nd SparkliteLED™
1st SparkliteLED™
Link
Output
DMX
Input
DMX
Input
Link
Output
Universal
DMX
Controller
1
st
DMX
Cable
2
nd
DMX
Cable
Drape
1
Drape
2
Drape
3
Drape
4
Drape
1
Drape
2
Drape
3
Drape
4
3
rd
DMX
Cable
Next
SparkliteLED™

Setup
April 8, 2010 11 SparkliteLED™ User Manual - Rev. 02c
Master/Slave
Fixture Linking
The Master/Slave mode allows one SparkliteLED™ controller (the master) running
a preconfigured program to control several SparkliteLED™ controllers (the slaves)
without requiring a DMX controller. In this mode, the drapes connected to the
master and slave SparkliteLED™ controllers will operate in unison.
The SparkliteLED™ uses the serial link (Link Output to DMX Input) for its
Master/Slave mode as well.
1. Link the fixtures as indicated in steps 3 to 5 of the previous section.
2. Make sure that there is no DMX controller connected to the daisy chain.
3. Follow the steps indicated in the “Operating Instructions” chapter of this manual
to configure the master and the slave fixtures.
Master/Slave Linking
Diagram
Slave SparkliteLED™
Master SparkliteLED™
Link
Output
DMX
Input
DMX
Input
Link
Output
Drape
1
Drape
2
Drape
3
Drape
4
Drape
1
Drape
2
Drape
3
Drape
4
Next Slave
SparkliteLED™

Setup
SparkliteLED™ User Manual - Rev. 02c 12 April 8, 2010
Mounting
Orientation
Always mount this fixture in any safe position while making sure that there is
adequate room around it for ventilation.
Rigging The SparkliteLED™ fixture consists of a controller unit and one to four LED drapes.
Each of them has specific rigging specifications. CHAUVET® recommends
following the general instructions below for the SparkliteLED™ controller and the
SparkliteLED™ drapes.
•When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments and routine maintenance.
•Never mount the fixture in places where rain, high humidity, extreme
temperature changes or restricted ventilation may affect it.
•Make sure that the location where you are mounting the fixture can support its
weight. Please see the “Technical Specifications” section of this manual for the
weight requirement of this fixture.
SparkliteLED™
Controller
You should mount the SparkliteLED™ controller on a flat, dry and rigid surface such
as plywood or similar. The SparkliteLED™ controller’s base plate has four holes to
accommodate regular screws for this purpose, as shown below.
In addition, the base plate has two M10 through holes and a threaded M10 socket
to mount the SparkliteLED™ controller onto a truss by using the appropriated type
of clamps.
In any case, remember the recommendations indicated above regarding access to
the unit and necessary room for ventilation.
SparkliteLED™ Controller
Mounting Diagram
SparkliteLED™
Drape
You should mount each SparkliteLED™ drape hanging from a truss or any other
suitable anchoring device using safety steel cables through the mounting grommets
on its sides (see diagram below).
Each SparkliteLED™ drape weighs 39.6 lbs (18 Kg) and because of its size, it
may be difficult to handle by a single person. Always have someone help you
with mounting the SparkliteLED™ drapes.
Mounting
Screws
Mounting
Screws
M10 bolt
through
hole

Operating Instructions
April 8, 2010 13 SparkliteLED™ User Manual - Rev. 02c
4. Operating Instructions
Control Panel
The SparkliteLED™ controller has a control panel to configure its functions. You can
access these functions by using the four panel buttons located directly under the
LCD Display. The table below explains the functions of those buttons.
Button Function
<MENU> Used to access the menu or to return to a previous
menu option
<ENTER> Selects a menu option
<UP> Scrolls through menu options in ascending
order
<DOWN> Scrolls through menu options in descending
order
Navigation
Functions
The Control Panel LCD Display has two lines. The upper line shows the menu items
the user selects from the menu map. While navigating the menu map, only the upper
row is active. When the user reaches a menu function that has an option
to be
accepted or changed, the display will show it on its lower row.
•To move to the right side of the menu map (next level), press <ENTER>. This will
serve to accept the current option and move forward.
•To move up or down in the menu map, use <UP> and <DOWN>. This will show
the available options for the current menu item.
•To move to the left side of the menu map (previous level), press <MENU>. This
will return the display to the previous option or exit the current option without
changing its value.
Menu Map
Description
The menu map in page 17 shows the various programming levels and the functions
they contain. Use the control panel buttons, as shown above, to navigate it.
Programming
Procedure
To start programming the SparkliteLED™ controller, the display must show MENU.
On power up, MENU shows on the display automatically. However, if someone has
already configured the SparkliteLED™ controller, its display may be showing the
current mode.
If MENU does not show on the display, press <MENU> repeatedly until MENU
appears.
This is the top of the menu map. At this point, <ENTER>, <UP> and <DOWN> will
not work.
12-Channel DMX
Mode
•With MENU showing on the display, press <MENU> once.
The display will show 12CH DMX Mode.
•Press <ENTER> to select this option.
The lower row of the display will show [SET] select.
•Press <ENTER> again to enable the 12-Channel DMX mode.
The display will show 12CH DMX512, which means that the 12-
Channel DMX
mode is now active.
If using multiple SparkliteLED™ controllers in the 12CH DMX Mode, remember
to connect them using the proprietary serial link, not the standard DMX link.

Operating Instructions
SparkliteLED™ User Manual - Rev. 02c 14 April 8, 2010
24-Channel DMX
Mode
•With MENU showing on the display, press <MENU> twice.
The display will show 24CH DMX Mode.
•Press <ENTER> to select this option.
The second row of the display will show [SET] select.
•Press <ENTER> again to enable the 24-Channel DMX mode.
The display will show 24CH DMX512, which means that the 24-Channel DMX
mode is now active.
Auto Mode Playing
•With MENU showing on the display, press <MENU> three times.
The display will show Auto.
•Press <ENTER> to select this option.
The upper row of the display will show Program [1].
•Alternatively, to select any of the other Auto Programs (2~8), press <UP> or
<DOWN>.
•Press <ENTER> again to enable the selected Auto Program.
The lower row of the display will show Edit.
At this point, the SparkliteLED™ controller will play the selected program.
•Press <MENU> to leave the selected program running.
The display will show the selected program.
Auto Mode
Programming
•With the selected program showing on the upper row of the display and Edit
showing on its lower row, press <ENTER> to configure the selected program.
The display will show Pattern type.
•Press <ENTER>to change the pattern type.
•Alternatively, press <UP> or <DOWN> to select any of the other parameters
(Cross Time, Speed, Minimum, Maximum, Number of Colors or Set color 1~4).
Pattern Type LED sparking direction patterns (1~7) or LED Strobe mode
•With the display showing Pattern type, press <ENTER>.
The display will show MODE (1).
•Alternatively, to select any of the other pattern types (Mode 2~7 or Strobe), press
<UP> or <DOWN>.
•To activate the selected pattern type, press <ENTER>.
The display will briefly show OK select and it will return to showing Pattern type.
•Press <DOWN> to select the next parameter or <MENU> to exit to the previous
level.
Cross Time
LED sparking overlap time (Mode 1~7) or strobe frequency (Strobe mode)
•With the display showing Cross time, press <ENTER>.
The display will show the current value (0~255).
•Press <UP> or <DOWN> to change the value.
•To activate the selected value, press <ENTER>.
The display will briefly show OK select and it will return to showing Cross time.
•Press <DOWN> to select the next parameter or <MENU> to exit to the previous
level.
•With the display showing Speed, press <ENTER>.
The display will show the current value (0~255).
•Press <UP> or <DOWN> to change the value.
•To activate the selected value, press <ENTER>.
The display will briefly show OK select and it will return to showing Speed.
•Press <DOWN> to select the next parameter or <MENU> to exit to the previous
level.

Operating Instructions
April 8, 2010 15 SparkliteLED™ User Manual - Rev. 02c
Speed
Color change speed
Minimum
Minimum LED brightness value
•With the display showing Minimum, press <ENTER>.
The display will show the current value (0~255).
•Press <UP> or <DOWN> to change the value.
•To activate the selected value, press <ENTER>.
The display will briefly show OK select and it will return to showing Minimum.
•Press <DOWN> to select the next parameter or <MENU> to exit to the previous
level.
Maximum Maximum LED brightness value
•With the display showing Maximum, press <ENTER>.
The lower row of display will show the current value (0~255).
•Press <UP> or <DOWN> to change the value.
•To activate the selected value, press <ENTER>.
The display will briefly show OK select and it will return to showing Maximum.
•Press <DOWN> to select the next parameter or <MENU> to exit to the previous
level.
Number of Colors Selects the number of colors and the mode (static or dynamic), or all colors (RGB)
Color modes 1~4 are static (one, two, three or four colors, respectively). Color
modes 5~7 are dynamic (four, three or two colors, respectively). Color mode 8
is for all colors (RGB).
•With the display showing Number colors, press <ENTER>.
The lower row of the display will show 1 Color mode.
•Alternatively, to select any of the other color modes (2~7 Color or Full Color),
press <UP> or <DOWN>.
•To activate the selected color mode, press <ENTER>.
The display will briefly show OK select and it will return to showing Number
colors.
•Press <DOWN> to select the next parameter or <MENU> to exit to the previous
level.
Set color (1~4)
Assigns a color to Color 1, Color 2, Color 3 and Color 4, respectively.
When selecting “1 Color” above, only configure Color 1. When selecting “2
Colors” above, only configure Color 1 and Color 2. When selecting “3 Colors”
above, configure Color 1~3. When selecting “4 Colors” above, configure Color
1~4. When selecting “Full Color” above, do not configure any color in this step.
•With the display showing Set color 1~4, press <ENTER>.
The lower row of the display will show the current set color 1~4 value (0~255).
•Press <UP> or <DOWN> to change the value.
•To activate the selected set color, press <ENTER>.
The display will briefly show OK select and it will return to showing Set color 1.
•Press <DOWN> to select the next set color parameter (2, 3, or 4) or <MENU> to
exit to the previous level.

Operating Instructions
SparkliteLED™ User Manual - Rev. 02c 16 April 8, 2010
Exiting Auto Mode
Programming
•Once done programming all Auto Mode parameters, press <MENU> to back up
from the latest parameter.
The upper row of the display will show the current Program number, while the
lower row will show [SET] save.
•Press <ENTER> to save the changes to the current program or <MENU> to exit
without saving.
When you configure the SparkliteLED™ controller to work in Auto Mode, it
automatically assumes the “master” function in a Master/Slave connection.
Master/Slave Mode
This mode only applies to the SparkliteLED™
controllers connected behind a
SparkliteLED™ controller set as “master” (Auto Mode) using the proprietary serial
link.
•With MENU showing on the display, press <MENU> four times.
The upper row of display will show Slave mode, while the lower row will show
[SET] select.
•Press <ENTER> to activate the Slave Mode.
The upper row of the display will show Slave, while the lower row will briefly show
OK select and it will clear afterwards.
If using multiple SparkliteLED™ controllers configured in Master/Slave Mode,
you must connect them using the proprietary serial link.
Settings
•With MENU showing on the display, press <MENU> five times.
The display will show Settings.
•Press <ENTER>.
The display will show SET DMX address.
•Alternatively, to select the other setting (Allow edit PROG), press <UP> or
<DOWN>.
Starting DMX Address
DMX Address of the first fixture’s DMX channel (See “DMX Primer”)
•With the display showing SET DMX address, press <ENTER>.
The lower row of the display will show the current starting DMX address (1~255).
•Press <UP> or <DOWN> to change the starting DMX address.
•Press <ENTER> to accept the new stating DMX address.
The upper row of the display will show SET DMX address, while the lower row
will show the current setting (1~255).
•To activate the new starting DMX address, press <ENTER>.
The display will briefly show OK save and it will return to showing
SET DMX
address.
•Press <DOWN> to select the other setting parameter (Allow edit PROG
) or
<MENU> to exit to the previous level.
Allow Edit PROG Auto Program modifications enabled/disabled
•With the display showing Allow edit PROG, press <ENTER>.
The lower row of the display will show [YES] NO. The selected option will show
between brackets.
•Alternatively, press <UP> or <DOWN> to change the selected option to [NO].
•To activate the selected option, press <ENTER>.
The display will briefly show OK save and it will return to showing Allow edit
PROG.
•Press <DOWN> to select the other setting parameter (Starting DMX address) or
<MENU> to exit to the previous level.