Chauvet F4 User manual

User Manual

Edition Notes
ii F4 User Manual, Rev. 1
Edition Notes
The F4 User Manual Rev. 1 covers the description, safety precautions, setup, installation,
operation, and maintenance of the F4. Chauvet released this edition of the F4 User Manual in
July 2016.
Trademarks
CHAUVET, the Chauvet logo and F4 are registered trademarks or trademarks of Chauvet &
Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their
respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text
and images are owned by Chauvet.
© Copyright 2016 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Usage
Chauvet authorizes its customers to download and print this manual for professional
information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution,
modification, or printing of this manual or its content for any other purpose without written
consent from Chauvet.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided.
If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this manual,
before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility and specifically disclaims any and all liability to
any party for any loss, damage or disruption caused by any errors or omissions in this
document, whether such errors or omissions result from negligence, accident or any other
cause. Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision, however, Chauvet has no
obligation to make, and does not commit to make, any such revisions.
Document
Revision
The F4 User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.

Table of Contents
F4 User Manual, Rev. 1 -iii-
Table of Contents
1. Before You Begin........................................................................................................................................1
What Is Included................................................................................................................................................................1
Unpacking Instructions......................................................................................................................................................1
Claims............................................................................................................................................................................................1
Manual Conventions ......................................................................................................................................................................1
Symbols.........................................................................................................................................................................................1
Safety Notes...................................................................................................................................................................... 2
Personal Safety..............................................................................................................................................................................2
Mounting And Rigging....................................................................................................................................................................2
Power And Wiring ..........................................................................................................................................................................2
Operation.......................................................................................................................................................................................2
Expected LED Lifespan..................................................................................................................................................... 2
2. Introduction.................................................................................................................................................3
Product Description........................................................................................................................................................... 3
Features ............................................................................................................................................................................ 3
Additional Products........................................................................................................................................................................3
Optional Accessories .....................................................................................................................................................................3
Available Signal and Power Cables (optional) ...............................................................................................................................3
Product Overview.............................................................................................................................................................. 4
Pixels Per Panel................................................................................................................................................................ 5
Product Dimensions ..........................................................................................................................................................6
3. Setup............................................................................................................................................................7
AC Power ..........................................................................................................................................................................7
AC Plug..........................................................................................................................................................................................7
Power Linking.................................................................................................................................................................................7
4. Mounting......................................................................................................................................................8
Orientation......................................................................................................................................................................... 8
Mounting Points.................................................................................................................................................................8
RB-F50CM Rig Bar Dimensions........................................................................................................................................ 9
RB-F100CM Rig Bar Dimensions ..................................................................................................................................... 9
Rig Bar/Panel Assembly ................................................................................................................................................................10
Truss Installation ...............................................................................................................................................................11
5. Joining Each F4 (Creating a Modular Design)...........................................................................................12
Vertically Joining the Panels ............................................................................................................................................. 12
Vertical Panel Connection..............................................................................................................................................................13
Horizontally Joining Panels............................................................................................................................................... 14
Horizontal Panel Connection..........................................................................................................................................................14
6. Connecting (Cabling) Each F4....................................................................................................................15
Testing Signal and Power Connections ............................................................................................................................15
Using the F4 Test button................................................................................................................................................... 15
Connecting Power and Signal Cables...............................................................................................................................16
Connecting the Signal Between Joined Panels..............................................................................................................................16
Connecting the Power Between Joined Panels............................................................................................................................17
7. LED Module Care and Replacement ..........................................................................................................18
F4 LED Module ................................................................................................................................................................. 18
LED Lot Numbers...........................................................................................................................................................................18
Using MT-03...................................................................................................................................................................................18
F4 LED Module Removal with MT-03 ............................................................................................................................................19
8. F4 Panel Configuration...............................................................................................................................21
Installing the Handle..........................................................................................................................................................21
Switching Between Front and Rear Serviceability ............................................................................................................23
9. Typical F4 Installation.................................................................................................................................25
Step 1.............................................................................................................................................................................................25
Step 2.............................................................................................................................................................................................25
Step 3.............................................................................................................................................................................................25
Step 4.............................................................................................................................................................................................25

Table of Contents
iv F4 User Manual, Rev. 1
Step 5.............................................................................................................................................................................................25
Step 6.............................................................................................................................................................................................25
Step 7.............................................................................................................................................................................................25
Step 8.............................................................................................................................................................................................25
10. Operation...................................................................................................................................................26
Additional Hardware and Software....................................................................................................................................26
About NovaLCT-Mars........................................................................................................................................................ 26
Description.....................................................................................................................................................................................26
11. Technical Information...............................................................................................................................27
F4 Maintenance.................................................................................................................................................................27
Returns.............................................................................................................................................................................. 27
12. Technical Specifications...........................................................................................................................28
Contact Us.......................................................................................................................................................29
1. Antes de empezar........................................................................................................................................31
Qué va incluido.................................................................................................................................................................. 31
Instrucciones de desembalaje........................................................................................................................................... 31
Reclamaciones...............................................................................................................................................................................31
Convenciones del manual..............................................................................................................................................................31
Símbolos........................................................................................................................................................................................31
Notas de seguridad........................................................................................................................................................... 32
Seguridad personal........................................................................................................................................................................32
Montaje e instalación.....................................................................................................................................................................32
Alimentación y cableado ................................................................................................................................................................32
Funcionamiento..............................................................................................................................................................................32
Vida útil prevista del LED..................................................................................................................................................32
2. Introducción ................................................................................................................................................33
Descripción del producto................................................................................................................................................... 33
Características ..................................................................................................................................................................33
Productos adicionales....................................................................................................................................................................33
Accesorios opcionales ...................................................................................................................................................................33
Cables de alimentación y señal disponibles (opcionales)..............................................................................................................33
Vista general del producto.................................................................................................................................................34
Píxeles por panel...............................................................................................................................................................35
Dimensiones del producto................................................................................................................................................. 36
3. Instalación ...................................................................................................................................................37
Corriente alterna................................................................................................................................................................37
Enchufe CA....................................................................................................................................................................................37
Alimentación en cadena.................................................................................................................................................................37
4. Montaje ........................................................................................................................................................38
Orientación........................................................................................................................................................................ 38
Puntos de montaje ............................................................................................................................................................ 38
Dimensiones de la Rig Bar RB-F50CM............................................................................................................................. 39
Dimensiones de la Rig Bar RB-F100CM........................................................................................................................... 39
Rig Bar/Ensamblaje del panel........................................................................................................................................................40
Instalación de truss ........................................................................................................................................................... 41
5. Unir todos los F4 (creación de un diseño modular)..................................................................................42
Unir los paneles verticalmente.......................................................................................................................................... 42
Conexión del panel vertical............................................................................................................................................................43
Unir los paneles horizontalmente...................................................................................................................................... 44
Conexión del panel horizontal........................................................................................................................................................44
6. Conectar (cablear) todos los F4.................................................................................................................45
Probar la señal y las conexiones de alimentación............................................................................................................ 45
Utilizar el botón de prueba del F4 ..................................................................................................................................... 45
Conectar los cables de alimentación y señal.................................................................................................................... 46
Conectar la señal entre paneles unidos.........................................................................................................................................46
Conectar la alimentación entre paneles unidos..............................................................................................................................47
7. Cuidados y sustitución del módulo LED...................................................................................................48

Table of Contents
F4 User Manual, Rev. 1 -v-
Módulo LED del F4............................................................................................................................................................ 48
Números de lote LED.....................................................................................................................................................................48
Usar MT-03....................................................................................................................................................................................48
Quitar el módulo LED del F4 con MT-03........................................................................................................................................49
8. Configuración del panel F4 ........................................................................................................................51
Instalar el asa.................................................................................................................................................................... 51
Cambiar entre mantenimiento delantero y trasero............................................................................................................ 53
9. Instalación típica del F4..............................................................................................................................55
Paso 1............................................................................................................................................................................................55
Paso 2............................................................................................................................................................................................55
Paso 3............................................................................................................................................................................................55
Paso 4............................................................................................................................................................................................55
Paso 5............................................................................................................................................................................................55
Paso 6............................................................................................................................................................................................55
Paso 7............................................................................................................................................................................................55
Paso 8............................................................................................................................................................................................55
10. Funcionamiento.........................................................................................................................................56
Hardware y software adicional.......................................................................................................................................... 56
Acerca de NovaLCT-Mars.................................................................................................................................................56
Descripción....................................................................................................................................................................................56
11. Información técnica ..................................................................................................................................57
Mantenimiento del F4........................................................................................................................................................57
Devoluciones..................................................................................................................................................................... 57
12. Especificaciones técnicas........................................................................................................................58
Contacto ..........................................................................................................................................................59
1. Avant de commencer..................................................................................................................................61
Contenu............................................................................................................................................................................. 61
Instructions de déballage .................................................................................................................................................. 61
Réclamations .................................................................................................................................................................................61
Conventions manuelles..................................................................................................................................................................61
Symboles.......................................................................................................................................................................................61
Consignes de Sécurité ...................................................................................................................................................... 62
Sécurité des personnes .................................................................................................................................................................62
Installation et fixation......................................................................................................................................................................62
Alimentation et câblage..................................................................................................................................................................62
Utilisation .......................................................................................................................................................................................62
Durée de vie des LEDs .....................................................................................................................................................62
2. Introduction.................................................................................................................................................63
Description de l'appareil.................................................................................................................................................... 63
Caractéristiques ................................................................................................................................................................ 63
Appareils supplémentaires.............................................................................................................................................................63
Accessoires optionnels ..................................................................................................................................................................63
Câbles de signal et d'alimentation disponibles (en option).............................................................................................................63
Vue d'ensemble de l'appareil ............................................................................................................................................ 64
Pixels par panneau............................................................................................................................................................65
Dimensions de l'appareil ................................................................................................................................................... 66
3. Installation...................................................................................................................................................67
Alimentation CA................................................................................................................................................................. 67
Prise CA.........................................................................................................................................................................................67
Chaînage électrique.......................................................................................................................................................................67
4. Fixation........................................................................................................................................................68
Orientation......................................................................................................................................................................... 68
Points de fixation............................................................................................................................................................... 68
Dimensions de la barre d'attache RB-F50CM................................................................................................................... 69
Dimensions de la barre d'attache RB-F100CM................................................................................................................. 69
Assemblage de la barre d'attache et du panneau..........................................................................................................................70
Installation sur treillis......................................................................................................................................................... 71
5. Assembler les F4 les uns aux autres (création d'une configuration modulaire) ....................................72

Table of Contents
vi F4 User Manual, Rev. 1
Assemblage vertical des panneaux .................................................................................................................................. 72
Connexion verticale des panneaux................................................................................................................................................73
Assemblage horizontal des panneaux ..............................................................................................................................74
Connexion horizontale des panneaux............................................................................................................................................74
6. Connexion (câblage) de chaque F4............................................................................................................75
Test des connexions de signal et d'alimentation............................................................................................................... 75
Utilisation du bouton Test du F4 ....................................................................................................................................... 75
Connexion des câbles d'alimentation et de signal.............................................................................................................. 76
Connexion du signal entre des panneaux assemblés....................................................................................................................76
Connexion de l'alimentation entre des panneaux assemblés.........................................................................................................77
7. Entretien et remplacement des modules LED...........................................................................................78
Module LED F4 ................................................................................................................................................................. 78
Numéros de lot LED.......................................................................................................................................................................78
Utilisation du MT-03.......................................................................................................................................................................78
Dépose de module LED du F4 avec le MT-03 ...............................................................................................................................79
8. Configuration du panneau du F4 ...............................................................................................................81
Installation de la poignée................................................................................................................................................... 81
Passer d'un accès par l'avant à un accès par l'arrière......................................................................................................83
9. Installation F4 type......................................................................................................................................85
Étape 1...........................................................................................................................................................................................85
Étape 2...........................................................................................................................................................................................85
Étape 3...........................................................................................................................................................................................85
Étape 4...........................................................................................................................................................................................85
Étape 5...........................................................................................................................................................................................85
Étape 6...........................................................................................................................................................................................85
Étape 7...........................................................................................................................................................................................85
Étape 8...........................................................................................................................................................................................85
10. Utilisation...................................................................................................................................................86
Matériel et logiciel additionnels ......................................................................................................................................... 86
A propos du NovaLCT-Mars.............................................................................................................................................. 86
Description.....................................................................................................................................................................................86
11. Informations techniques...........................................................................................................................87
Entretien du F4.................................................................................................................................................................. 87
Renvois.............................................................................................................................................................................. 87
12. Spécifications techniques ........................................................................................................................88
Nous Contacter ...............................................................................................................................................89
1. Voordat tu begint.........................................................................................................................................91
Wat is er inbegrepen......................................................................................................................................................... 91
Uitpakinstructies................................................................................................................................................................91
Claims............................................................................................................................................................................................91
Conventies van deze handleiding..................................................................................................................................................91
Symbolen.......................................................................................................................................................................................91
Veiligheids-instructies........................................................................................................................................................ 92
Persoonlijke veiligheid....................................................................................................................................................................92
Montage en ophangen...................................................................................................................................................................92
Stroom en bedrading......................................................................................................................................................................92
Werking..........................................................................................................................................................................................92
Verwachte levensduur van de LED-lamp..........................................................................................................................92
2. Inleiding.......................................................................................................................................................93
Product-beschrijving..........................................................................................................................................................93
Eigenschappen..................................................................................................................................................................93
Extra producten..............................................................................................................................................................................93
Optionele accessoires....................................................................................................................................................................93
Beschikbare signaal- en voedingskabels (optioneel).....................................................................................................................93
Productoverzicht................................................................................................................................................................ 94
Pixels per paneel............................................................................................................................................................... 95
Afmetingen van het product ..............................................................................................................................................96
3. Instelling ......................................................................................................................................................97

Table of Contents
F4 User Manual, Rev. 1 -vii-
AC-stroom ......................................................................................................................................................................... 97
AC-stekker.....................................................................................................................................................................................97
Power Linking.................................................................................................................................................................................97
4. Montage .......................................................................................................................................................98
Oriëntatie........................................................................................................................................................................... 98
Bevestigingspunten........................................................................................................................................................... 98
RB-F50CM opbouwbalkafmetingen .................................................................................................................................. 99
RB-F100CM opbouwbalkafmetingen ................................................................................................................................99
Opbouwstang/paneelmodule .........................................................................................................................................................100
Spantinstallatie..................................................................................................................................................................101
5. Samenvoegen van elke F4 (Creëren van een modulair ontwerp)...............................................................102
Verticaal samenvoegen van de panelen........................................................................................................................... 102
Verticale paneelverbinding.............................................................................................................................................................103
Horizontaal samenvoegen van de panelen....................................................................................................................... 104
Horizontale paneelverbinding.........................................................................................................................................................104
6. Verbinden (bekabelen) van elke F4............................................................................................................105
Testen van signaal- en stroomaansluitingen........................................................................................................................ 105
Gebruik van de testknop van de F4 .................................................................................................................................. 105
Aansluiten van stroom- en signaalkabels.......................................................................................................................... 106
Het signaal aansluiten tussen de samengevoegde panelen..........................................................................................................106
Het vermogen aansluiten tussen de samengevoegde panelen......................................................................................................107
7. Verzorging en vervanging van de LED-module.........................................................................................108
F4 LED-module ................................................................................................................................................................. 108
Lot-nummers van de LED..............................................................................................................................................................108
Gebruik van de MT-03 ...................................................................................................................................................................108
F4 LED-moduleverwijdering met MT-03.........................................................................................................................................109
8. F4-paneelconfiguratie.................................................................................................................................111
Installeren van de handgreep............................................................................................................................................ 111
Schakelen tussen onderhoudsgemak aan de voor- en achterzijde..................................................................................113
9. Gebruikelijke F4-installatie.........................................................................................................................115
Stap 1.............................................................................................................................................................................................115
Stap 2.............................................................................................................................................................................................115
Stap 3.............................................................................................................................................................................................115
Stap 4.............................................................................................................................................................................................115
Stap 5.............................................................................................................................................................................................115
Stap 6.............................................................................................................................................................................................115
Stap 7.............................................................................................................................................................................................115
Stap 8.............................................................................................................................................................................................115
10. Werking......................................................................................................................................................116
Extra apparatuur en software............................................................................................................................................116
Over NovaLCT-Mars......................................................................................................................................................... 116
Beschrijving....................................................................................................................................................................................116
11. Technische informatie ..............................................................................................................................117
Onderhoud van de F4 .......................................................................................................................................................117
Retouren............................................................................................................................................................................118
12. Technische specificaties ..........................................................................................................................119
Neem Contact Op............................................................................................................................................120

Before You Begin
F4 User Manual, Rev. 1 1
1. Before You Begin
What Is Included
•4 F4
•4 Carrying Handles
•1 Neutrik® powerCON® Power Cord
•4 Neutrik® powerCON® Power Linking Cords
•4 Neutrik® etherCON® Signal Linking Cords
•Warranty Card
•User Manual
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack and check the container. Make
sure you have received all the parts indicated above in good condition.
Claims
Upon receipt, if the container or the contents (the product and included accessories)
appear damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not Chauvet
. Failure to do so in a timely manner may invalidate your claim
with the carrier. In addition, keep the container and all the p
acking material for
inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with Chauvet
within 7 days of receiving the
merchandise.
Manual Conventions
Convention
Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
Symbols
Symbols Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may cause the product not
to work, damage third-party equipment, or cause harm to the
operator.
Important installation or configuration information. Failure to
comply with this information may keep the product from working.
Useful information.

Before You Begin
2 F4 User Manual, Rev. 1
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained Chauvet certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is not intended for permanent installation.
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable.
•Never carry the product by the power cord or any moving part.
Power And
Wiring
•Make sure the power cord is not crimped or damaged.
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Never connect this product to a dimmer pack or rheostat.
•Make sure to replace the fuse with another of the same type and rating.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have
the damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For
this reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’
lifespan. Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending
this lifespan is vital, lower the operating temperature by improving the ventilation around the
product and reducing the ambient temperature to an optimal operating range. In addition,
limiting the overall projection intensity may also help to extend the LEDs’ lifespan.

Introduction
F4 User Manual, Rev. 1 3
2. Introduction
Product
Description
The F4 is a 1 meter by 50 centimeter LED video panel that is ideal for both the installation and
rental markets. It runs on the Novastar
control protocol and is fully front & rear serviceable
with the magnetic LED modules. This product may be mounted directly on a flat wall, due to
the front-service option.
Features
•4.8 mm pitch video panel using Novastar control protocol
•Black body LEDs produce optimal black levels and high contrast video quality
•1000 x 500 mm magnesium die-cast housing makes this product among the lightest
•in the market
•Optimized for fully front & rear service for the LED modules and control box
•Magnetic LED modules make service fast and easy
Additional
Products
•VIP Drive 43Nova (required)
Optional
Accessories
•VIP Media Server
•ArKaos Media Master Express + KN software
•MT-03 LED Module Removal Tool
•F-Series Rig Bar (RB-F50CM, RB F100CM)
Available Signal
and Power Cables
(optional)
•Signal cables (Neutrik® etherCON® CAT6 Signal Extensions)
oETHERCONEXT18IN
oETHERCONEXT5FT
oETHERCONEXT10FT
oETHERCONEXT25FT
oETHERCONEXT50FT
•Power cables (Neutrik® powerCON® Power Extensions)
oPOWERCONEXT18IN
oPOWERCONEXT5FT
oPOWERCONEXT10FT
oPOWERCONEXT25FT
oPOWERCONEXT50FT

Introduction
4 F4 User Manual, Rev. 1
Product Overview
Male Speego
Connection
Alignment
Magnets
(x4)
Test Button/
Power/Signal Indicator LEDs
Threaded
Mounting Hole
Size M12
(4x)
Removable
Handle
Female Speego
Connection
Neutrik® etherCON®
Signal Through Port
Neutrik® powerCON®
In/Out Ports
Alignment Conical
(x2)
Neutrik® etherCON®
Signal Through Port
Alignment Magnets
(x4)

Introduction
F4 User Manual, Rev. 1 5
Pixels Per Panel
Each pixel is 1 tri-color LED. The following table provides the pixels per panel in each
F4. For detailed specifications, refer to the Technical Specifications
table at the end of
this User Manual.
F4
Pixels per Panel
104 x 208
Total Pixels per Panel
21,632
Pixels per LED Module
52 x 104
Total Pixels LED Module
5,408
LED Module Dimensions
250 x 500 mm
To calculate the number of panels, horizontally and vertically, supported by a
single VIP Drive 43Nova, you will use :
•The number of pixels per panel.
•The screen resolution you would like to use for your video wall display.
The VIP Drive 43Nova is required to operate an F4
video wall system. Diagrams of
how the F4 panels and the VIP Drive 43Nova
connect follow later in this manual.
For detailed information about the VIP Drive 43Nova
and panel calculation
examples, refer to the VIP Drive 43Nova Quick Reference Guide.
LED Module

Introduction
6 F4 User Manual, Rev. 1
Product Dimensions
2.2 in
(56 mm)
1.89 in
(48 mm)
17.48 in
(444 mm)
19.69 in
(500 mm)
37.17 in
(944 mm)
39.37 in
(1000 mm)

Setup
F4 User Manual, Rev. 1 7
3. Setup
AC Power
Each F4 has an auto-ranging power supply that works with an input voltage range of
100–240 VAC, 50/60 Hz.
To determine the power requirements for each
F4, refer to the label affixed to the product. You can also refer to the
Technical
Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the Chauvet
website: www.chauvetprofessional.com.
•Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
Each F4 comes with a power linking cord to connect power between panels and a power
input cord.
This cable has a Neutrik® powerCON® connector to connect to the F4 and an Edison
plug for power input. Use the table below as a reference to wire a new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Power Linking
All F4 panels support power linking. Refer to the following table for specifications on
each panel.
Voltage
F4 Products
@ 120 V, 60 Hz
7
@ 208 V, 60 Hz
12
@ 230 V, 50 Hz
13
Please refer to all applicable local codes and regulations for the proper installation
of this product.

Mounting
8 F4 User Manual, Rev. 1
4. Mounting
Orientation
Each F4 is constructed of aluminum die-cast. This ensures each panel is stable and
easy to install. Each panel also has a convenient built-in handle
located on the top,
backside of the panel along with an alignment nipple on the top. This combination
enabl
es you to easily pick up and securely hold each panel while mounting and working
with the panels.
The F4 can be assembled to provide any number of modular designs. The panels on the
top can be securely hung from a truss or other stable surface. Always ha
ng in a safe
position with adequate space for ventilation, configuration, and maintenance.
Chauvet recommends following the general guidelines below.
•When selecting an installation location, consider ease of access for operation and
routine maintenance.
•Make sure to hang away from any flammable material, as indicated in the Safety
Notes section.
•Never mount in places where rain, extreme temperature changes, or restricted
ventilation may affect it.
•Make sure that the structure to which you are hanging the panels can support the
weight.
•See the Technical Specifications for the weight requirement of each F4.
Mounting Points
1. Threaded Mounting
Holes Size M12 (4x)
2. Male Speego
Connection
3. Female Speego
Connection
1
1
1
1
2
2
2
3
3
3
3
2
2
3

Mounting
F4 User Manual, Rev. 1 9
RB-F50CM Rig Bar Dimensions
RB-F100CM Rig Bar Dimensions
2.56 in
(65 mm)
36.06 in
(916 mm)
3.31 in
(84 mm)
2.76 in
(70 mm)
39.37 in
(1000 mm)
1.97 in
(50 mm)
19.69 in
(500 mm)
1.97 in
(50 mm)
2.76 in
(70 mm)
2.56 in
(65 mm)
16.38 in
(416 mm)
1.38 in
(35 mm)
0.39 in
(10 mm)
1.18 in
(30 mm)
*Sold Separately
*Sold Separately
1.38 in
(35 mm)
0.39 in
(10 mm)
1.18 in
(30 mm)

Mounting
10 F4 User Manual, Rev. 1
Rig Bar/Panel
Assembly
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Insert the Rig Bar Speego locking bars into the female Speego connections on the F4.
3. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
4. Twist the tightening knob clockwise until F4 is secure to Rig Bar.
5. To detach the Rig Bar from the F4, reverse the previous steps.
•The alignment magnets on the F4 and F-Series Rig Bar are designed to
temporarily hold the weight of the panel to allow the user to properly align and
tighten the panel into place.
•Either side of the F4 with female Speego connections can attach to the F-Series
Rig Bar, but only the short side has alignment conicals and magnets. When
attaching the long side of the F4 to the Rig Bar, take care to ensure that the
pixels across the video assembly are aligned properly.
Warning! The magnetic attachments are not load-bearing, and are intended for
alignment assistance only. Do
not release panel until the hanging hardware has
been fully secured.
Alignment Holes
Alignment Magnets
Alignment Conical
(x2)
Bottom View
Top View
Male Speego Connection
Rig Bar Locking Latch
Rig Bar Locking Tab
Rig Bar Speego
Spring
Knob Tightening
Knob
Locking Bar

Mounting
F4 User Manual, Rev. 1 11
Truss Installation
Refer to the following diagram for truss installation. Chauvet offers the F-Series Rig Bar
(sold separately) specifically designed for hanging the panels.
The 4–M12 mounting positions are intended for flush mount installation to a flat
surface
behind the video panels. All 4 mounting positions for the panel must be
used in order to maintain structure integrity. The M12 mountings are not intended
for hanging or suspending from a truss or other overhead structure.
In order to suspend/hang the panels from a truss or other
overhead structure, use
the F-series Rig Bars (RB-F50CM or -F100CM, sold separately).
The illustrations above are examples only. Please refer to all applicable local
codes and regulations for the proper installation of the product.
Threaded Mounting Holes
Size M12 (4x)
Attach to Truss using optional F-Series Rig Bar

Joining Each F4 (Creating a Modular Design)
12 F4 User Manual, Rev. 1
5. Joining Each F4 (Creating a Modular Design)
Vertically Joining
the Panels
Each F4 can be easily joined vertically to a truss using an optional rig bar and the 2
female Speego connections located at the top corners
of each panel. Use the male
Speego
connections at the bottom of each panel to connect additional panels. These
connectors stay recessed when not being used.
Male Speego
Spring Knob
Tightening Latch
Locking Bar (inside)