Chemin'Arte GH-R Series User manual

Please read the manual carefully prior to use
Feet
Display
screen
Operation key
Black crystal glass
Power on/off switch

Ⅱ．Product features
1．High-quality heating element with aluminum hear sink: made of advanced technology, fast
heat, big thermal area, rapid temperature rise, stable performance, no oxygen consumption,
no light consumption.
2．Options of common type and remote control type.
3．Display panel of digital screen, infrared remote control, easy and simple. (Remote type)
4．Silent warmth: quiet and cozy.
5．Multiple safety device: Auto power-off protection during overheating, safer and more at ease.
6．Thermal sensor design: easy for you to set room temperature that you are satisfied with.
(Remote control series)
7．24-hour switch on and off: easy, safe, reliable. (Remote control series)
8．Display of automatic determination of ambient temperature. (remote control series)
9．Portable wall-mounted structure: easy for you to install according to actual needs.
10．Operation function of touch switch. (Remote type)
11．Noble, elegant and beautiful special black crystal glass panel
Ⅲ． Safety Instructions
Open the package, take out the body, check whether the supplied accessories and the
body are complete and intact.
Power on (plug such as electrical outlet) after the equipment is installed in place
according to installation instructions and requirements.Requirements for power outlet
and power:AC 220-240V,frequency 50/60Hz,withstand current ≥ 10A.
Read the service manual before you use the electric heater. Keep the manual and have
it attached with the heater in case you offer the heater to others as a gift.
The heater is only suitable for indoor use.Do not use it outdoors!
The heater can not be directly used in tub, shower room or near pool
Do not leave the heater unattended during use.Keepthe heater out of the reach of
children. Do not use automatic switch device on the heater (for example, time switch),
otherwise automatic operation of the electric heater which is left unattended may be
caused.
Covering of the heater is strictly prohibited.Maintain a sufficient safe distance from
inflammablesand explosives to avoid risks of fires and explosions.
Inserting other items into the shell or protection grid of the electric heater is strictly
prohibited, or electric leakage and shock may be caused.
Do not touch the metal housing as it will get hot during the running of the electric heater,
and keep the heater away from children to avoid risk of burns. Set aside some time to
let the heater cool before you turn it off and store it.
If the electric heater has been idle for a long time, plug the power plug from the outlet.

Prior to the use of the electric heater, make sure that the heater is in a good condition
and intact. In case the heater shell, wire or plug is damaged, the heater may not be
connected to power
The heating unit of the heater (the heating film at the back of the protection grid of the
heater) may be damagedfrom fall. Please confirm the heating unit is not damaged
prior to each use. Do not use the electric heater if the heating element is broken.
Disconnect the power plug when moving or cleaning this appliance. When
disconnecting the appliance connection, first turn off the switch, then unplug the plug.
Do not yank the power cable.
Demolition of the electric heater with authorization is strictly prohibited. Please look for
professional service personnel if the heater is damaged.
The product is limited to home use.
Installation of the heater directly under wall outlet is strictly forbidden.
During normal use, do not let bare skin touch the surface of the appliance, so as not to
be burnt
Avoid the use of the heater if children, animals or the disabled and those who lack self
control are present while nobody else is taking care of them.
The appliance should not be available to the following people (including children):
those with physical, sensory or mental impairments, or those who lack experience and
knowledge unless they get custody or instructions on the use of the product from the
person who is responsible for their safety.
Children should be supervised and ensuredthat they will not play with this appliance.
Only specific personnel from the technical service center may replace the power cord
of the product in case it is damaged to ensure safety.
Do not share the socket with other electrical appliances to avoid current overload, or
fire risks may be caused by excessive load
CAUTION: covering of the cooling device is prohibited to avoid overheating, or
dangerous accidents may be caused.
Ⅳ. Installation and application of the electric heater
Check whether the parts are complete and the product is intact when open the package.
If you want to usethe electric heater in a mobile way, please install the rollersprovided in the
package. Make sure the heater is correctly fixed with the screws provided. Please make sure
the base is level, stable and clean. Please note the safe distance mentioned below.

Steps for castor installation:
1. Put the product upside down on a soft cotton cloth or carpet.
2. Mount the stand in the corresponding location of the lower part of the product as shown above,
and then fix the randomly supplied screw at the bottom of the product with a screwdriver and
tighten the screw.
Wall-mount Instructions
1. Take out the wall brackets and expansion screws out from the box, and fix the screws onto the
wall according to the distances between holes of the wall brackets, as depicted in the picture
below.
Hook
Hook
Expansion Screw
Expansion Screw

2. Aim the 4 holes in the back of the machine to the 4 hooks on the wall bracket and push it on,
and then slide into the slot to click on, as shown below.
3. Fix the wall bracket lock piece onto the bracket with screws, slide the lock piece into the
locking slot on the back of the machine, and then tighten up the screw, as shown in the picture
below.
Note: Prior to the drilling,make sure there is no cable or other pipelines on the wall to
avoid damage. Remember that the screws on the wall shall be fixed and firm to ensure the
safety installation of the electric heater on the wall. Please note the safe distance
mentioned below.
During installation,the heater must be maintained sufficiently safe distance from combustible
materials and gas and away from water.
During wall-hanging installation, keep the installation height from the ground greater than 15
cm. Hanging-type heater shall be no less than 50 cm away from the ceiling.
Ⅴ． Operation notice
Make sure the heater shell, line and power plug are intact.
Check the rated voltage in the model label of the heater is in line with that of the outlet.
Power outlet requirements are: voltage 230V, frequency 50Hz, bearing current ≥ 10A. Do not
power the heater on until the requirements are met.
Wall Bracket
Lock Piece

User Manual for LCD Screen models
Remote Control Interface for GH-R Series
1. Press the Power button and the product becomes standby, with the screen showing the
current ambient temperature (Note: After powering on, the product will automatically use the
default working temperature of 35°C.), time as 00:00, and the Frost-free function icon,
without any other icons. The frost-free function will only start in standby or after the end of
timing, indicated by the flashing border of the icon (Note: The Frost-free temperature
is set higher than 5°C.). When the heating is on, the frost-free function will stop, and the
border of the frost-free icon stops flashing.
2. In the standby mode: Press the Temperature button and you can set the temperature
with the Up and Down buttons. Press the timing button and you can set
the power-on time with the Up and Down buttons (Note: In the timing mode, the
border of the timing icon keeps flashing.).
3. In the standby mode: Press the Power button and you can switch between Comfortable

mode , Economical mode , and Frost-free mode . While heating, the
heating icon is shown and the border of the Comfortable mode icon flashes,
which means the machine is heating at a high level. Press the Power button again to
switch to low-level heating mode, as indicated by the flashing border of the Economical
mode icon . Press the Power button again to switch to frost-free mode, with the
border of the frost-free icon flashing, and the product stops heating, with the heating
icon disappear. In the heating mode, press the Temperature button and the
temperature number will flash, which can be set by using the Up and Down
buttons and the set up will be accepted after 10 seconds. Press the Timing Button and
you can set the time to shut down with the Up and Down buttons. The time will
decrease along with the time passing (Note: In the timing mode, the timing icon
keeps flashing. When timing is not set, the time is shown as 00:00.) .
4. Temperature setup: In the heating mode, you can set the desired room temperature (i.e.
Comfortable or Economical mode). The machine's working temperature ranges from -20°C to
50°C and the temperature can be set between 15~50°C. When the ambient temperature is
equal to the preset temperature, the machine automatically switches from Comfortable mode
to Economical mode (i.e. from high-level heating to low-level heating mode), and the border
of the Comfortable icon stops flashing, with the border of the Economical icon
flashing instead. When the ambient temperature is 2°C higher than the preset temperature, the
product stops heating (along with the heating icon disappearing, Comfortable mode
icon border stopping flashing). When the ambient temperature is 3°C lower than the
preset temperature, the machine will automatically switch back to Comfortable working
mode (showing the heating icon , and flashing the border of the Comfortable mode
icon .)
5. Timing setup: In the standby mode, you can set the time to automatically turn on the machine.
In the heating mode, you can set up the time to automatically shut down. (The displayed time
will decrease along with the time passing by.)

User Manual for mechanical models
Turn the temperature control knob clockwise to the end, press the level-I power switch to switch
on the low-level heating, or the level-II switch for the high-level heating. If both levels are
switched on, the machine will be working on the maximum power.
Temperature Control
Switch

This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this
product for environmental safe recycling.
RETURN PROCEDURE FOR DECORATIVE HEATERS
All our heaters are guaranteed for 1 year parts and labor. If
during this period there were a malfunction of your product, please
follow the return procedure below (if baught in France) or contact your dealer if
baught in any other European countries :
- Above all else, call customer service at 0951 634 467
to determine the cause of the problem and the solution to.
- Package the defective chimney in its original packaging.
Make sure it is properly protected (especially at the
corners).
- Attach to the original parcel receipt by circling the date
purchase (no photocopies will be accepted) and the name and
the return address of the recipient.
- Send it at your expense, to: EFYDIS, 4 allée de l’olivet, 07300 StJean de Muzols.
- We will repair or replace your defective heater
and return it to you at our expense at the adress
mentioned with the package (address in France).
- We will also return the receipt, dated and
buffered to revalidate the warranty.
If you have questions or comments, please contact us at
[e-mail] or www.cheminarte.com or call 0951 634 467 (local call rate).