Chesterfield Sofas York UK31214296 User manual

ASSEMBLY INSTRUCTION
2 SEATER
Notes:
- The assembly will require 2 people
- Do not tighten all the bolts until the sofa is fully assembled
PLEASE READ this document before assembly to familiarise yourself with the different
stages of construction
Carefully check the contents of this box against the parts list below
A: Armrest x 2 B: Backrest x1 C: Seat Base x1 D: Footboard x1
F: Legs x 4 G: Spacer x 4
E: Seat Cushions x 2 I: Allen Key x 1
x 2

1 2
3
5
4
B
AA
D
H
B
AA
FF
A
B
A
C
D
FF
AB
A
D
EE
FF
F
F
F
F
F
G
G
F
A
F
G
G
F
Parts required
A: Armrest
F: Legs
G:Spacer
Place a Spacer through the bolt on the Leg and screw
in a clockwise direction on the bottom of the Armrest.
Repeat this process on all 4 Legs.
Additional Parts Required
B: Backrest
Position the Backrest and both Armrests as shown in
diagram. Locate the metal sliders on the back of the
Armrest and the sides of the Backrest. Lift the
backrest and align the metal sliders, slowly lower
both sides of Backrest until all the tops are level.
Additional Parts Required
D: Footboard x 1
H: Allen Key x 1
Using the Allen Key loosen bolts to make it easier to
position the Footboard in place. Tighten bolts using
Allen Key
Additional Parts Required
C: Seat Base x 1
Locate the metal clips on the Seat Base and lower into
position as illustrated above.
Additional Parts Required
E: Seat Cushions x 2
Place both Seat Cushions in place as illustrated above.
A