Furniture of America Foster CM3437T User manual

16-07-21

12mm
12mm
4mm

1. Align the pre-drilled holes on
the base (#4) with the pre-drilled
holes on the leg stand (#3).
2. Insert two bolts (#A) and secure
using the Allen wrench (#E). Repeat
process on the other leg stand (#3).
#4
1. Insert the bolt (#D) into
the top pre-drilled holes,
turn right to tighten.
2. Insert one end of (#6) and
(#5) into one leg stand,
then the other ends into
the other leg stand.
3. Apply a washer (#C)
then hex nut (#H) onto
the other ends of the
bolts (#D) and secure
using the wrench (#I).
4. Insert 2 bolts (#B) into each
bottom corner of the leg
stands and secure using
the Allen wrench (#E).

To insert the table leaf (#2) unlock the
latches located under the table top (#1).
1. Insert the table top (#1)
onto the threaded ends
on top of the leg stands.
2. Apply a flat washer (#F), lock washer (#G), then
hex nut (#H) in that order onto the threaded ends
from within the table. Secure using the wrench (#I).

1. Once unlocked, slide outward on both ends of the
outer-piece table until there is sufficient opening
to place the table leaf (#2). Then slide inward on
both ends of the outer-piece table until they are
touching and sitting flush with the table leaf (#2).
2. Secure the parts together
by locking the latches located
under the table top (#1).
ASSEMBLY IS COMPLETED
Adjust the leveler according to the ground level. Turn the
leveler clockwise or counterclockwise, respectively.