Chevrolet 2012 Full-Size Truck User manual

Black plate (1,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
2012 Full-Size Truck Navigation System M
Infotainment System . . . . . . 3
Introduction ................. 3
Overview . . . . . . . . . . . . . . . . . . . . . . . 4
Radio ....................... 11
AM-FM Radio . . . . . . . . . . . . . . . . . 11
Satellite Radio . . . . . . . . . . . . . . . . 16
Audio Players ............. 16
CD/DVD Player . . . . . . . . . . . . . . . 16
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Hard Drive Device (HDD) . . . . . 23
Auxiliary Devices . . . . . . . . . . . . . . 35
Rear Seat Infotainment . . . 36
Rear Seat Entertainment (RSE)
System . . . . . . . . . . . . . . . . . . . . . . 36
Navigation ................. 41
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . . 41
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Navigation Symbols . . . . . . . . . . . 45
Destination .................... 50
OnStar
®
Destination
Download . . . . . . . . . . . . . . . . . . . . 60
Configure Menu . . . . . . . . . . . . . . . 62
Global Positioning
System (GPS) . . . . . . . . . . . . . . . 69
Vehicle Positioning . . . . . . . . . . . . 70
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . . 70
If the System Needs
Service . . . . . . . . . . . . . . . . . . . . . . 71
Map Data Updates . . . . . . . . . . . . 71
Database Coverage
Explanations . . . . . . . . . . . . . . . . . 72
Voice Recognition . . . . . . . . 72
Phone ...................... 80
Bluetooth . . . . . . . . . . . . . . . . . . . . . 80
Trademarks and License
Agreements .............. 88
Index ..................... i-1

Black plate (2,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11

Black plate (3,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 3
Introduction
The names, logos, emblems,
slogans, vehicle model names, and
vehicle body designs appearing in
this manual including, but not limited
to, GM, the GM logo, CHEVROLET,
the CHEVROLET Emblem, and the
names TAHOE, SUBURBAN,
AVALANCHE, and SILVERADO,
GMC, the GMC Truck Emblem, and
the names SIERRA, SIERRA
DENALI, YUKON, YUKON XL,
YUKON DENALI, and YUKON XL
DENALI are registered trademarks
of General Motors Corporation LLC.
The information in this manual
supplements the owner manual.
This manual includes the latest
information available at the time it
was printed. We reserve the right to
make changes in the product after
that time without notice. For
vehicles first sold in Canada,
substitute the name General Motors
of Canada Limited for Chevrolet
Motor Division or GMC whenever it
appears in this manual.
Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle is
sold, leave this manual in the
vehicle.
Canadian Vehicle Owners
Propriétaires Canadiens
A French language copy of this
manual can be obtained from your
dealer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de
langue française
www.helminc.com
Litho in U.S.A.
Part No. 22820299 B Second Printing ©2011 General Motors LLC. All Rights Reserved.

Black plate (4,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
4 Infotainment System
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
The navigation system includes
navigation and audio functions.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features
intended to help with this by
disabling some features when
driving. A grayed-out function is not
available when the vehicle is
moving.
All functions are available when the
vehicle is parked. Do the following
before driving:
.Become familiar with the
navigation system operation,
buttons on the faceplate, and
touch-sensitive screen buttons.
.Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the
speakers.
.Set up the navigation features,
such as entering an address or a
preset destination.
.Set up phone numbers in
advance so they can be called
easily by pressing a single
button or a single voice
command for navigation systems
equipped with phone capability.
{WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash and you or others could be
injured or killed. Focus your
attention on driving and limit
glances at the moving map on the
navigation screen. Use voice
guidance whenever possible.
Use the navigation system to:
.Plan a route.
.Select a destination using
various methods and choices.
.Follow turn-by-turn route and
map guidance with voice
prompts, only if permitted by
traffic laws, controls, and
conditions.
.Receive RDS broadcast
announcements.

Black plate (5,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 5
Always be alert and obey traffic and
roadway laws and instructions,
regardless of the guidance from the
navigation system. Because the
navigation system uses street map
information that does not include all
traffic restrictions or the latest road
changes, it may suggest using a
road that is now closed for
construction or a turn that is
prohibited by signs at the
intersection. Always evaluate
whether following the system's
directions is safe and legal for the
current conditions.
When the navigation system is
turned on, a screen may appear
with information that must be read
and acknowledged before accessing
some navigation features.
After acknowledging the start up
information, the NAV (Navigation)
and DEST (Destination) functions
are accessible. Information can now
be entered or deleted, and other
functions accessed. See
instructions later in this section.
Every 50 times the vehicle is started
and the navigation system is turned
on, the Caution screen appears.
After reading the caution, select OK
to load the map data information.
If OK is not selected, all control
buttons except for NAV (Navigation)
and DEST (Destination) can be
accessed.
When getting started, set your
preferences or delete information in
the navigation system using various
options.

Black plate (6,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
6 Infotainment System
Navigation System Overview A. O(Power/Volume)
B. Z(Eject)
C. Auxiliary Input Jack
D. Multifunction Knob
E. SRCE (Source)
F. 6(Seek Next/Forward)
G. 7(Seek Previous/Reverse)
H. J(Play/Pause)
I. 4(Information)
J. FAV (Favorite)
K. MENU
L. RPT (Repeat)
M. DEST (Destination)
N. NAV (Navigation)

Black plate (7,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 7
NAV (Navigation) Menu
The Navigation menu screen
accesses the navigation system
settings.
1. Press NAV to view the
navigation map screen. The map
and the vehicle's current location
displays.
2. Press NAV to change between a
map/audio split view or a full
map view.
Config Menu
Press MENU to display the Config
Menu. The Config Menu is used to
change the screens for the radio,
navigation display, phone, vehicle
configuration, and time features.
Turn the Multifunction knob to scroll
through the available setup features.
Once the desired feature displays,
press the Multifunction knob or
press the desired feature on the
screen, to display more options
within that feature.
Languages
To change the display language,
see “Vehicle Personalization”in the
vehicle owner manual.
The vehicle supports English,
French (Canadian), and Spanish.
The default language is English.
English and Metric Unit
Conversion
To change the display readings
between English and metric units,
see “Driver Information Center
(DIC)”in the vehicle owner manual
for more information.
Deleting Personal Information
The navigation system can record
and store destinations and personal
information such as names and
addresses.

Black plate (8,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
8 Infotainment System
At times, such as when you are
selling or disposing of your vehicle,
you may want to delete this
information:
.Previous Destinations.
.Address Book, Fav Route,
Preset Destinations, and HDD
music files.
Storing Radio Station Presets
Up to 36 preset stations can be
stored. AM, FM, and XM (if
equipped) can be mixed. To store
presets:
1. Press Oto turn the system on.
2. If viewing a map screen, press
SRCE, FAV, or press the source
screen button.
3. Select the band.
4. Press 6,7, or turn the
Multifunction knob to select the
desired station.
5. Press and hold one of the preset
screen buttons for more than
two seconds.
6. Repeat the steps for each
preset.
To change the number of preset
pages, see AM-FM Radio on
page 11.
Entering an Address and Point
of Interest, and Storing Preset
Destinations
The vehicle must be in P (Park) to
perform these operations.
Entering an Address
If having trouble finding a city or a
street name:
.Enter the street name first
instead of the city name, or vice
versa.
.Enter more characters or reduce
the amount of characters to
reduce or expand the available
options.
To set a destination by entering a
street name:
1. Press DEST.
2. If necessary, enter the state/
province name. The last state/
province name is automatically
recalled.
3. Select the street name field.
Enter the street name. Do not
enter directional information or
street type. Use the space U
screen button between street
and city names. Use the
backspace qscreen button to
delete an incorrect character.
A list displays if four or fewer
names are available. If there are
more than four, there is a match
counter with a number of
available streets. Press the List
button to view the list and select
the street.
4. Select the city from the list or
enter the city name.

Black plate (9,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 9
5. Enter the house number. This
field is automatically selected.
6. Press OK. The address
information screen displays the
address entered.
7. Press Go if correct. The route
will calculate.
8. Select the route preference for
Fastest, Shortest, or Easiest.
The chosen route preference
highlights. See Destination on
page 50.
9. Press the Start Guidance screen
button and the route is now
ready to be started.
See “Address Entry”under
Destination on page 50.
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI):
1. Press Oto turn the system on.
2. A caution could appear. Press
OK to proceed.
3. Press DEST.
4. Press the Point of Interest
screen button.
5. Enter the specific title of the POI
in the POI name space.
If four or less names are
available, a list displays. If more
than four are available, there is a
match counter with a number in
it, representing the number of
available POI names. Press List
to view the list. Select the POI.
6. Press Go. The system
calculates the route.
7. Select the route preference for
Fastest, Shortest, or Easiest.
The system highlights the route.
8. Press the Start Guidance screen
button. The route is now ready
to be started.
See “Point of Interest (POI)”under
Destination on page 50.
Storing Preset Destinations
1. Press Oto turn the system on.
2. A caution could appear. Press
OK to proceed.
3. Press DEST.
4. Enter a destination. See
Destination on page 50.
5. Press Save from the map screen
to add the current final
destination to the address book.
The address book screen
appears.
6. Press the Edit screen button. An
alpha-keyboard displays. Enter
the name.

Black plate (10,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
10 Infotainment System
7. Press and hold one of the
screen buttons at the bottom of
the screen until the text in the
button changes.
The address book entry name
appears in that preset
destination screen button and is
now available to select from the
Select Destination screen. See
“Using the Stored Preset
Destinations”next in this section
to select it as a destination.
See “Preset Destination”under
Destination on page 50.
Using the Stored Preset
Destinations
These destinations are available for
selection while driving.
1. Press Oto turn the system on.
2. A caution could appear. Press
OK to proceed.
3. Press DEST.
4. Press one of the available preset
destination screen buttons. The
system calculates the route.
5. Select the route preference for
Fastest, Shortest, or Easiest.
The system highlights the route.
6. Press the Start Guidance screen
button. The route is now ready
to be started.
See “Preset Destination”under
Destination on page 50.
Canceling Guidance
Guidance is canceled once you
arrive at the final destination. To
cancel guidance prior to arrival at
the final destination:
1. Press DEST.
2. Press the Cancel Guidance
screen button.
3. Press Yes to confirm
cancellation.
Voice Guidance
To adjust the volume of voice
guidance prompts:
1. Press MENU to enter the Config
Menu features. Turn the
Multifunction knob until Nav
displays. Press the Multifunction
knob to select Nav or press the
Nav screen button to display
more options within that feature.
2. Press the Voice Prompt screen
button.
3. Press the Voice Volume screen
button.
4. Press + or –to increase or to
decrease the volume of the
voice prompts.
See “Voice Volume”under Using the
Navigation System on page 41.

Black plate (11,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 11
Cleaning the Display
Notice: Using abrasive cleaners
when cleaning glass surfaces
could scratch the glass. Use only
a soft cloth and do not spray
cleaner directly on the system as
it could affect the mechanical
parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
paint thinner, it could scratch the
surface or erase the characters on
the buttons.
Radio
AM-FM Radio
Playing the Radio
Audio Source Menu
O(Power/Volume):
1. Press to turn the radio on or off.
2. Turn to increase or decrease the
volume. The volume is adjusted
for the current audio source,
active navigation voice
guidance, or voice prompts.
The steering wheel controls can
also be used to adjust the volume.
See “Steering Wheel Controls”in
the Index of the vehicle owner
manual for more information.
Also, see “Radio Settings”and
“Automatic Volume”in this section.
Multifunction Knob: Turn to
change the radio station. See
“Finding a Station”following for
more information.
SRCE (Source): Press to select
the AM, FM, XM (if equipped), HDD,
DISC, USB, AUX, and AV.
The audio sources can also be
changed by using the steering
wheel controls. See “Steering Wheel
Controls”in the index of the vehicle
owner manual for more information.
If the audio system is on and a map
screen is being viewed, audio
information displays at the top of the
map screens.

Black plate (12,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
12 Infotainment System
Press the audio display screen
button to display the current audio
source screen. The display shows a
split screen with the audio source
screen on the left side and the map
or guidance screen on the right
side. Press the Full Map screen
button to exit the split view screen.
Navigation Audio System
Tone Settings
To access the sound menu, press
MENU, then select Tone.
Setting the Tone
To adjust the bass, treble and
midrange using the sound menu:
.Bass: Press + or −to change
the level.
.Mid (Midrange): Press + or −to
change the level.
.Treble: Press + or −to change
the level.
Adjusting the Speakers
To adjust the speaker balance:
.Press and hold ofor more
sound from the left speakers
or pfor more sound from the
right speakers. The middle
position balances the sound
between the left and right
speakers.
To adjust the speaker fade:
.Press and hold wfor more
sound from the front speakers
and xfor more sound from the
rear speakers. The middle
position balances the sound
between the front and rear
speakers.

Black plate (13,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 13
EQ Settings
There are two different sound
systems available for the trucks
included in this navigation system
supplement. Some trucks will have
the EQ setting options that include
Manual or Talk. Other trucks have
the EQ setting options of Normal,
Driver, Rear, and Stereo.
EQ (Equalization): The EQ
settings are selected through the
sound menu.
The following touch-sensitive
buttons are located at the bottom of
the screen:
Normal: Select to adjust the audio
to be in normal mode. This provides
the best sound quality for all seating
positions.
Driver: Select to adjust the audio
to give the driver the best possible
sound quality.
Rear: Select to adjust the audio to
give the rear seat occupants the
best possible sound quality.
Surround: Select to adjust the
audio to give the best overall sound
quality for all seating postions.
Radio Settings
To access the Radio settings menu,
press MENU to display the Config
Menu. Turn the Multifunction knob
to scroll through the available
features until the Radio feature
displays. Press this feature to
display more options.

Black plate (14,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
14 Infotainment System
Audio system settings or features
can be customized for:
Audio Pilot (If Equipped)
Select OFF, Low, Medium, or High
sensitivity to automatically adjust
the volume to minimize the effects
of unwanted background noise that
can result from changing road
surfaces, driving speeds or open
windows. This feature works best at
lower volume settings where
background noise is typically louder
than the sound system volume.
Number of Favorite Pages
Change the number of mixed-band
preset pages when using FAV.
Press 1-6 to select the number of
preset lists.
HDD FAV Pages (Number of
Favorite Categories for
HDD Mode)
Selects the categories such as
Playlist, Artist, Album, and Genre to
be used as a favorite category
during HDD mode.
DivX
®
VOD
The DivX
®
VOD feature must be
registered before it can be used.
1. Press the DivX
®
VOD screen
button to display the DivX
®
Video on Demand menu.
2. Press the Registration Code
screen button to display the
Registration Code information
display.
3. Press the Deactivation option to
unregister this device.
Finding a Station
Select the band, see “Audio Source
Menu”in this section.
Turn the Multifunction knob to find a
radio station. To select a preset
station, press the corresponding
preset button.
See “Mixed-Band Presets”following
for more information.
Seeking a Station
Press 6or 7to search for a
station.
Local Station List Search
To find a list of local stations in the
current band AM or FM band, press
the Multifunction knob or touch the
audio source screen. The radio
performs a search for available
stations.

Black plate (15,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 15
Mixed-Band Presets
Up to 36 preset stations can be
stored. Each page can store
six preset stations. The presets
within a page can be from different
radio bands.
To scroll through the pages, press
FAV. The current page number
displays above the preset buttons.
The stored stations for each
Favorites page displays on the
touch-sensitive preset buttons at the
bottom of the screen. The number of
preset FAV lists can be changed.
To store a radio station to a
mixed-band preset list:
1. Press SRCE, then press AM,
FM, or XM (if equipped) to select
the desired band.
2. Tune to the station.
3. Press and hold one of the
preset buttons for more than
two seconds. The station
frequency appears on the preset
button at the bottom of the
display.
4. Repeat the steps for each preset
in Favorites page.
To recall a preset station from a
FAV page:
1. Press FAV to scroll to the page.
2. Press the preset button. The
stored preset station is recalled.
Timeshift
The Timeshift feature automatically
begins recording the audio when
listening to the radio.
The recording allows playback of
content that was missed.
Timeshift stores up to 20 minutes of
content. After 20 minutes, it
removes the oldest content and
continues recording new content.
When listening to a station for more
than 20 seconds, press J(play/
pause) to stop hearing the
information through the speaker.
During this paused time, timeshift
keeps recording. A status bar
displays the length of the recording.
Press 7to rewind what was stored
into the timeshift.
To resume listening to the broadcast
at the point where you left off,
press Jagain.
Timeshift stops recording and
erases the buffer when the station
or source is changed.
Alternatively, before turning the
vehicle off, press Jso that timeshift
keeps recording for 20 minutes.
If the vehicle is still off after
20 minutes, the system stops
recording and all information is lost.
If a low battery condition occurs,
timeshift stops recording and all
information is erased.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM
stations that broadcast RDS
information. With RDS, the radio
can seek to stations broadcasting
the selected type of programming.

Black plate (16,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
16 Infotainment System
Satellite Radio
XM™Satellite Radio Service
Vehicles with an XM satellite radio
tuner and an XM satellite radio
subscription can receive XM
programming.
XM is a satellite radio service that is
based in the 48 contiguous United
States and 10 Canadian provinces.
XM Satellite Radio has a wide
variety of programming and
commercial-free music,
coast-to-coast, and in digital-quality
sound. A service fee is required to
receive the XM service. For more
information, see www.xmradio.com
or call 1-800-929-2100 in the U.S.
or in Canada, www.xmradio.ca or
call 1-877-438-9677.
When XM is active, the channel
name and number, category name,
song title, and artist displays on the
screen.
XM Categories
XM stations are organized in
categories.
Removing or Adding Categories
1. Turn the Multifunction knob until
Radio displays. Press the
Multifunction knob to select
Radio or press the Radio screen
button to display more options
within that feature.
2. Select Show/Hide XM
Categories screen button.
3. Press the category screen
buttons to show or hide the
category.
XM Radio Messages
See “XM Radio Messages”in the
vehicle owner manual for a list of
possible XM messages.
Audio Players
CD/DVD Player
The player can be used for CD,
MP3, DVD audio and as a DVD
video player.
With the ignition on, insert a CD/
DVD into the slot, label side up. The
player pulls it in and begins playing.
While playing, the navigation
system is available.
The vehicle must be in P (Park) for
video to display.
The DVD player is only compatible
with DVDs of the appropriate region
code that is printed on the jacket of
most DVDs.
The system is capable of playing:
.Most audio CDs
.CD-R
.CD-RW
.MP3 or unprotected WMA
formats

Black plate (17,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 17
.DVD-Video
.DVD-Audio
.DVD-R/RW
.DVD+R/RW
When playing any compatible
recordable disc, the sound quality
can be reduced due to disc quality,
the method of recording, the quality
of the music or video that has been
recorded, or the way the disc has
been handled.
There can be increased skipping,
difficulty in recording tracks, and
difficulty in finding tracks/chapters
and/or difficulty in loading and
ejecting. If these problems occur,
check the disc for damage or try a
known good disc.
To avoid damage to the CD/DVD
player:
.Do not use scratched or
damaged discs
.Do not apply labels to discs. The
labels could get caught in the
player.
.Insert only one disc at a time.
.Keep the loading slot free of
foreign materials, liquids and
debris.
If a description label is needed, try
labeling the top of the disc using a
marking pen.
Loading and Ejecting Discs
To load a disc:
1. Turn the ignition on.
2. Insert a disc into the slot, label
side up. The player pulls it in the
rest of the way. If the disc is
damaged or improperly loaded,
there is an error and the disc
ejects.
The disc automatically plays once
loaded.
Press Zto eject a disc from the
CD/DVD player.
Playing a CD/DVD
A disc must be loaded to select the
source.
When a disc is loaded, the Disc icon
displays.
There are two ways to play a
CD/DVD:
.Insert the disc and playback
starts automatically.
.Press SRCE, then press the
Disc screen button.
Playing an Audio CD
A track number displays at the
beginning of each track. Song,
Artist, and Album information
displays when available.

Black plate (18,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
18 Infotainment System
Use the following controls to play
the disc:
J(Play/Pause): Press to start,
pause, or resume play.
6(Seek Next/Forward):
.Seeks to the next track.
.Press and hold to fast forward
through a track. Release this
button to return to playing
speed. Elapsed time displays.
7(Seek Previous/Reverse):
.Press to seek to the beginning of
the current or previous track.
If the track has been playing for
less than five seconds, it seeks
the previous track. If longer than
five seconds, the current track
starts from the beginning.
.Press and hold to fast reverse
through a track. Release this
button to return to playing
speed. Elapsed time displays.
Multifunction Knob: Turn to the
right or left to go to the next or
previous track.
MENU: Press this knob or touch
the CD Menu on the screen to
display the track list option, then
select the track from the list. The
system plays the selected track and
returns to the CD screen.
CD Menu
Press the CD Menu screen button
to display the CD Music Menu.
Shuffle: Plays the tracks randomly
rather than in sequence. Press
again to stop shuffle. A checkmark
indicates shuffle is on.
Track List: Displays the list of
tracks on the disc. Select the track
from the list. The selected track
plays and the CD screen displays.
Playing an Audio and
Video DVD
To view the DVD video, the vehicle
must be in P (Park) for an automatic
transmission or the parking brake
must be engaged for a manual
transmission.
After the DVD is loaded, the menu
options display on the DVD screen.
The menu options time out and a
full screen appears after about
10 seconds. Press anywhere on the
navigation system screen or press
FAV or SRCE to view the menu
screen again.

Black plate (19,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
Infotainment System 19
Use the preset screen buttons or
press other appropriate screen
buttons to operate the DVD options.
There are two pages of DVD
options. Press the arrow button,
located in the bottom right corner of
the screen, to access the other
page. Only the highlighted functions
are available for use. Some menu
options are only available when the
disc is not playing.
DVD Options
Full Screen: Select to hide the
DVD options and display the full
video image. Press anywhere on
the navigation system screen or
press FAV or SRCE to re-display the
source screen buttons over the
video image.
Cursor: Press to access the cursor
menu. The arrows and other cursor
options allow navigation of the DVD
menu options. The cursor menu
options are only available if a DVD
has a menu.
q,Q,r,R(Arrow Buttons): Press
these arrow buttons to move around
the DVD menu.
J(Play/Pause): Press to start,
pause, or resume play.
6(Seek Next/Forward):
1. Press to seek to the next
chapter.
2. Press more than once to
continue moving forward through
the disc.
3. Press and hold to fast forward
through a disc. When fast
forward is active, press again to
change the speed. Elapsed time
displays.
4. Press Jto resume playing.
7(Seek Previous/Reverse):
1. Press to seek to the beginning of
the current or previous chapter.
If the chapter has played for less
than five seconds, it goes to the
previous chapter. If the chapter
has played longer than
five seconds, the current chapter
is restarted. More than one
press continues moving back
through the disc.
2. Press and hold to fast reverse
through a disc. When fast
reverse is active, press again to
change the speed. Elapsed time
displays.
3. Press Jto resume playing.
Multifunction Knob: Turn to the
right or left to go to the next or
previous chapter.
Stop:
1. Press to stop the DVD.
2. To resume playing the DVD from
where it stopped, press J.
Shuffle:
1. Select to play the tracks
randomly rather than in
sequence.
2. Select again to play sequential.
This button is available for DVD
audio discs.

Black plate (20,1)
Full-Size Truck Navigation System - 2012 - CRC 2nd Edition - 11/15/11
20 Infotainment System
Top Menu: Select to display the
first menu of the DVD. Availability of
this feature is dependent on
the DVD.
Menu: Select to display the menu
for the part of the DVD that is
currently playing. Availability of this
feature is dependent on the DVD
and is not available for audio DVDs.
Keypad:
1. Select to display and search
through the chapter, track or
menu number screen.
2. On the keypad, enter the title/
chapter number or the group/
track number.
Search: Select to perform a title
search.
Angle:
1. Select to adjust the viewing
angle of the DVD, depending on
the DVD, while the DVD is
playing.
2. Continue pressing to cycle
through the viewing angles.
Audio:
1. Select to change the audio
stream and the audio language
heard, while the DVD is playing.
2. Continue pressing to cycle
through the available audio
streams or languages,
depending on the DVD.
Subtitle:
1. Select while a DVD is playing to
view with subtitles on or off or to
change the language of the
subtitles.
2. Continue pressing to cycle
through the available subtitle
languages and to turn subtitles
off, depending on the DVD
playing.
Pan Scan: Pan Scan is a method
of adjusting widescreen film images
so that they can be proportioned to
fit the DVD screen display. Select to
turn on Pan Scan.
Error Messages
If Disc Read Error displays and/or
the disc comes out, it could be for
one of the following reasons:
.The disc has an invalid or
unknown format.
.The disc is not from a correct
region.
.The disc is very hot. Try the disc
again when the temperature
returns to normal.
.The road is very rough. Try the
disc again when the road is
smoother.
.The disc is dirty, scratched, wet,
or upside down.
.The air is very humid. Try the
disc again later.
.There could have been a
problem while burning the disc.
.The label might be caught in the
CD/DVD player.