Chevrolet TAHOE - TRUCK NAVIGATION SYSTEM 2010 User manual

Infotainment System ......... 3
Introduction ...................... 3
Overview ....................... 4
Radio ............................. 14
AM-FM Radio ............... 14
Satellite Radio .............. 22
Audio Players ................ 25
CD/DVD Player ............ 25
Auxiliary Devices .......... 44
Navigation ...................... 44
Using the Navigation
System .................. 44
Maps .......................... 47
Navigation Symbols ....... 50
Navigation Menu ........... 56
Destination .................. 68
Global Positioning
System (GPS) ......... 81
Vehicle Positioning ........ 82
Problems with Route
Guidance ................ 83
If the System Needs
Service .................. 83
Ordering Map DVDs ...... 83
Database Coverage
Explanations ........... 84
Voice Recognition .......... 84
Index .................................. i-1
2010 Full-Size Truck Navigation System M

Introduction
GENERAL MOTORS, GM, the
GM Emblem, CHEVROLET,
the CHEVROLET Emblem, and
the names TAHOE, SUBURBAN,
AVALANCHE, and SILVERADO,
GMC, the GMC Truck Emblem,
and the names SIERRA, SIERRA
DENALI, YUKON, and DENALI,
HUMMER, the name HUMMER, H2,
and the H2 Design are registered
trademarks of General Motors.
Manufactured under license under
license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other
U.S. and worldwide patents issued
& pending. DTS and DTS Digital
Surround are registered trademarks
and the DTS logos and Symbol
are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights
Reserved.
Dolby
®
is manufactured under
license from Dolby
®
Laboratories.
Dolby
®
and the double-D symbol are
trademarks of Dolby
®
Laboratories.
“Made for iPod” means that an
electronic accessory has been
designed to connect specifically to
iPod and has been certified by
the developer to meet Apple
performance standards.
Litho in U.S.A.
Part No. 25872529 A First Printing
©
2009 General Motors. All Rights Reserved.
Infotainment System 3

iPod is a trademark of Apple
Computer, Inc., registered in the
U.S. and other countries.
The information in this manual
supplements the owner manual.
This manual describes features
that may or may not be on your
specific vehicle either because
they are options that you did not
purchase or due to changes
subsequent to the printing of this
owner manual. Please refer to
the purchase documentation relating
to your specific vehicle to confirm
each of the features found on
your vehicle. For vehicles first sold
in Canada, substitute the name
“General Motors of Canada Limited”
for Chevrolet Motor Division, GMC,
or HUMMER wherever it appears
in this manual.
Keep this manual with the owner
manual in the vehicle, so it will
be there if it is needed. If the vehicle
is sold, leave this manual in the
vehicle.
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens)
A French language copy of this
manual can be obtained from your
dealer/retailer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l’adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de
langue française
www.helminc.com
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
The navigation system includes
navigation and audio functions.
While entering the vehicle or when
turning the vehicle off, some
DVD Map Disc noise is normal.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features intended
to help keep your eyes on the
road and mind on the drive. Some
features may be disabled while
driving. Note that these functions
will be grayed-out. A grayed-out
function indicates it is not available
when the vehicle is moving.
4 Infotainment System

All functions are available when the
vehicle is parked. Do the following
before driving:
•Become familiar with the
navigation system operation,
hard keys on the faceplate, and
touch-sensitive screen buttons
of the navigation system.
•Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the speakers.
•Set up the navigation features
before beginning driving, such
as entering an address or a
preset destination.
•Set up your phone numbers in
advance so they can be called
easily with the press of a
single button or a single voice
command (for navigation systems
equipped with phone capability).
{WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{WARNING
Avoid looking too long or too often
at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
Use the navigation system to:
•Plan a route.
•Select a destination using
various methods and choices.
•Follow turn-by-turn route and
map guidance with voice
prompts, only if permitted by
traffic laws, controls, and
conditions.
You should always be alert and
obey traffic and roadway laws and
instructions, regardless of the
guidance from the navigation
system. Because the navigation
system uses street map information
that does not include all traffic
restrictions or the latest road
changes, it may suggest using a road
that is now closed for construction or
a turn that is prohibited by signs at
the intersection. Because the system
uses limited information, you must
always evaluate whether following
the system’s directions is safe and
legal for the current conditions.
Infotainment System 5

When the navigation system is
turned on, a screen may appear with
the information below, and you
must read and acknowledge
the information it contains.
{WARNING
Taking your eyes off the road for
extended periods could cause a
crash resulting in injury or death
to you or others.
To help avoid a crash in which you
or others could be killed:
•Always concentrate on your
driving first by keeping your eyes
and mind on the road, and
your hands on the wheel.
•Follow system directions only if
permitted by traffic laws,
controls, and conditions.
•Before using this system, read
the owner’s manual and learn
how it operates.
•Some system controls cannot be
used the when vehicle is moving.
After you acknowledge the start up
information you will be able to
access the NAV (navigation) and
DEST (destination) functions.
Once accessed, you can enter or
delete information in the navigation
system or access other functions.
See instructions later in this section.
Every fifty times the vehicle is
started and the navigation system
is turned on, the Caution screen
appears. After reading the caution,
select OK to load the map DVD
information. If OK is not selected,
all hard keys except for NAV
(Navigation) and DEST (Destination)
can be accessed. You can also
press the NAV hard key to have this
Caution screen appear.
When getting started, set the
navigation system to your preference
or delete information you may have
entered using various options.
6 Infotainment System

A. Map Disc DVD Slot. See
“Installing the Map DVD” under
Maps on page 47 for more
information.
B. FULL MAP Touch Screen
Button. See “NAV” under
“Hard Keys” under Using the
Navigation System on page 44
for more information.
C. North Up/Heading Up Symbol.
See Navigation Symbols on
page 50 for more information.
D. O(Power/Volume) Knob.
See AM-FM Radio on page 14
and Satellite Radio on page 22
for more information.
E. No GPS Signal Symbol.
See Navigation Symbols
on page 50 for more information.
F. NAV (Navigation) Hard Key.
See “Hard Keys” under Using
the Navigation System on
page 44 for more information.
G. Distance and Time to Distance
Symbol. See Navigation
Symbols on page 50 for more
information.
Screen Shown with Map Disc Inserted
Infotainment System 7

H. DEST (Destination) Hard Key.
See Destination on page 68
for more information.
I. Map Scale. See “Map Scales”
under Maps on page 47 for
more information.
J. RPT (Repeat) Hard Key for
Voice Guidance. See “Hard
Keys” under Using the Navigation
System on page 44 for more
information.
K. FAV (Favorite) Hard Key. See
“Storing Radio Station Presets”
under Using the Navigation
System on page 44 for more
information.
L. V(Zoom In) Touch Screen
Button. See “Map Scales” under
Maps on page 47 for more
information.
M. Mark Touch Screen Button.
See “Adding Destinations to
the Address Book” under
Destination on page 68 for
more information.
N. Source (AM, FM, XM, CD, etc.)
Touch Screen Button. See
AM-FM Radio on page 14 and
Satellite Radio on page 22
for more information.
O. Audio CD/Video DVD Slot.
See CD/DVD Player on page 25
for more information.
P. Z(Audio CD/Video DVD Eject)
Hard Key. See CD/DVD Player
on page 25 for more information.
Q. Auxiliary Input Jack. See
Auxiliary Devices on page 44 for
more information.
R. Clock Touch Screen Button.
See Navigation Menu on
page 56 for more information.
S. Distance to Next Turn Symbol.
See Navigation Symbols on
page 50 for more information.
T. f(Tune/Sound) knob. See
AM-FM Radio on page 14
and Satellite Radio on page 22
for more information.
U. AUDIO Hard Key. See AM-FM
Radio on page 14 and Satellite
Radio on page 22 for more
information.
V. MENU Hard Key (Settings and
Preferences). See Navigation
Menu on page 56 for more
information.
W. ¨SEEK (or Next) Key.
See AM-FM Radio on page 14
and Satellite Radio on
page 22 for more information.
X. U(Zoom Out) Touch Screen
Button. See “Map Scales”
under Maps on page 47 for
more information.
Y. ©SEEK (or Previous) Key.
See AM-FM Radio on page 14
and Satellite Radio on page 22
for more information.
Z. POI (Point of Interest) Touch
Screen Button. See “Displaying
Points of Interest (POI) on
the Map Screen” under
Navigation Symbols on page 50
for more information.
8 Infotainment System

Language — English/Metric
To change the language of the
navigation screens, see “Driver
Information Center (DIC)” in
your vehicle’s owner manual index
for more information.
To change the navigation screens
from English or metric, see “DIC
Operation and Displays” in your
vehicle’s owner manual index
for more information.
Deleting Personal Information
This navigation system can
record and store personal
information such as names and
addresses. At times, such as when
you are disposing of your vehicle,
you may want to delete this
information. See “Edit Address
Book — Edit/View” under Navigation
Menu on page 56 for deleting
information from the address book.
Limit Features While Driving
The navigation system may
have this feature.
Touch the Limit Features While
Driving screen button to turn on and
off the ability to limit functions
while driving. When this screen
button is highlighted, the following
functions are limited while driving:
•Music Navigator Scrolling
•Radio Category Scrolling
•Navigation Menu Scrolling and
some functions
See “Category” under AM-FM Radio
on page 14 and Satellite Radio
on page 22 for more information.
See “From Map” under Destination
on page 68 for more information.
Some functions will remain limited
regardless of the setting.
Storing Radio Station Presets
To set preset radio stations,
do the following:
1. Press the O(power) knob to
turn the system on.
2. Press the AUDIO hard key
and select the desired band
(AM,FM1,FM2,XM1,orXM2
(if equipped)).
3. Use the f(tune) knob or the
SEEK arrows to tune to the
desired station.
4. Press and hold one of the
five preset screen buttons, at the
bottom of the screen, until you
hear a beep or see the station
displayed on the selected preset
button.
5. Repeat the steps for each preset.
See “Storing Radio Station Presets”
under AM-FM Radio on page 14
and Satellite Radio on page 22 for
more information.
Infotainment System 9

Setting the Clock
To set the time, do the following:
1. Press the clock touch screen
button located in the upper
right corner of the screen.
2. Press the Set screen button.
3. Press the Hours and Minutes
−(minus) and + (plus) signs
to decrease and to increase the
time. See “Setting the Clock”
under Navigation Menu on
page 56 for more information.
Setting the Search Area,
Entering an Address and
Point of Interest, and Storing
Preset Destinations
Before entering an Address,
Point of Interest, Home, or Preset
Destination, select the appropriate
region that contains the final
destination. Your vehicle must be in
P (Park) to perform this operation.
Setting the Search Area
To set the search area, do the
following:
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the O(power) knob to turn
the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 47 for more
information.
4. A caution may appear. Touch the
OK screen button to proceed.
5. Press the DEST hard key.
6. Press the Change Search Area
screen button.
7. Select the appropriate region
numbered screen button that
contains your final destination.
8. Press the Back screen button to
return to the Destination Entry
menu. See Destination on
page 68 for more information.
Entering an Address
If you are having trouble finding a
city or a street name, do the
following:
•Input the street name first instead
of the city name, or vice versa.
•Input more characters or reduce
the amount of characters to
reduce or expand the available
options.
To set a destination by entering a
city name, do the following:
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the O(power) knob to turn
the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 47 for more
information.
4. A caution may appear. Touch the
OK screen button to proceed.
10 Infotainment System

5. Press the DEST hard key.
6. Press the 6Address Entry
screen button.
7. The City name category will
automatically be selected for
entry. Start entering the
city name.
If five or less names are available
for the entered characters, a
list will display. If more than
five are available, there will be a
screen button with a number
in it, it represents the number
of available cities. Select this
button to view the list and select
a city.
8. Once a city is selected the
street name category will
automatically be selected for
entry. Start entering the
street name.
Do not enter directional
information or street type, and
use the space symbol screen
button ( U) between street or
city names. For example, the
street name N. Royal Oak
Rd. should be entered as royal
Uoak. Use the backspace
(q) screen button if an
incorrect character has been
entered.
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents
the number of available streets.
Select this button to view
the list.
9. Select the street name with
the correct prefix from the
list (Dr., Ln., St., etc.).
10. Once a street has been
selected, the numeric keyboard
will display, allowing you to
enter the house number.
The system will display the
house number range that
is available for the street.
11. Select the Go screen button.
A map screen, with the
destination marked, will appear.
12. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate
and highlight the route.
13. Select the Start Guidance
screen button. You are now
ready to start your route.
See “Address Entry” under
Destination on page 68 for more
information.
Infotainment System 11

Entering a Point of Interest (POI)
To set a destination by entering
a Point of Interest (POI), do the
following:
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the O(power) knob to turn
the system on.
3. Insert the DVD map disc.
See “Installing the Map DVD”
under Maps on page 47 for more
information.
4. A caution may appear. Touch the
OK screen button to proceed.
5. Press the DEST hard key.
6. Press the iPoint of Interest
screen button.
7. Enter the specific title of the
POI in the POI name space
(i.e. Washington Monument).
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents
the number of available POIs.
Select this button to view the list.
8. Select the Go screen button.
A map screen, with the
destination marked, will appear.
9. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate
and highlight the route.
10. Select the Start Guidance
screen button. You are now
ready to start your route.
See “Point of Interest (POI)” under
Destination on page 68 for more
information.
Storing Preset Destinations
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the O(power) knob to
turn the system on.
3. Insert the DVD map disc.
See “Installing the Map DVD”
under Maps on page 47 for more
information.
4. A caution may appear. Touch the
OK screen button to proceed.
5. Press the DEST hard key.
6. Enter a destination. See
Destination on page 68 for
information on how to enter a
destination.
7. Press the Mark screen button
from the map screen to add
the current final destination as a
preset destination.
The address book screen will
appear.
12 Infotainment System

8. Select the Name screen button.
An alpha-keyboard will display.
Enter the name.
9. Press and hold one of the
screen buttons at the bottom of
the screen until a pop-up
confirmation displays.
The name will appear in that
preset destination screen button
and is now available to select
from the Destination Entry
screen. See “Using Your Stored
Preset Destinations” next in
this section to select it as a
destination.
See “Adding or Changing Preset
Destinations” under Destination
on page 68 for more information
on how to add preset
destinations.
Using Your Stored Preset
Destinations
These destinations are available for
selection while driving.
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the O(power) knob to
turn the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 47 for more
information.
4. A caution may appear. Touch the
OK screen button to proceed.
5. Press the DEST hard key.
6. Select one of the available
preset destination screen
buttons. A map screen, with the
destination marked, will appear.
7. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate
and highlight the route.
8. Select the Start Guidance screen
button. You are now ready to
start your route.
See “Preset Destination” under
Destination on page 68 for more
information.
Canceling Guidance
Guidance will be canceled once
you arrive at your final destination.
To cancel guidance prior to arrival
at the final destination, do the
following:
1. Press the DEST hard key.
2. Press the Cancel Guidance
screen button.
Infotainment System 13

Guidance Volume
To adjust the volume of voice
guidance prompts, do the following:
1. Press the MENU hard key to
enter the menu options, then
press the MENU key repeatedly
until Nav is selected or touch
the Nav screen button.
2. Press the >Voice Prompt
screen button.
3. Press the + (plus) or – (minus)
screen buttons to increase or
to decrease the volume of
the voice prompts.
See “Voice Prompt” under
Navigation Menu on page 56 for
more information.
Hybrid Screens
See the “Two-Mode Hybrid Manual”
for more information.
Use a soft clean cotton cloth
dampened with clean water.
Radio
AM-FM Radio
Notice: Before adding any sound
equipment to the vehicle, such
as an audio system, CD player,
CB radio, mobile telephone,
or two-way radio, make sure that
it can be added by checking
with your dealer/retailer. Also,
check federal rules covering
mobile radio and telephone units.
If sound equipment can be
added, it is very important to
do it properly. Added sound
equipment can interfere with the
operation of the vehicle’s
engine, radio, or other systems,
and even damage them. The
vehicle’s systems can interfere
with the operation of sound
equipment that has been added.
Notice: The chime signals
related to safety belts, parking
brake, and other functions of
the vehicle operate through the
navigation system. If that
equipment is replaced or
additional equipment is added
to the vehicle, the chimes may
not work. Make sure that
replacement or additional
equipment is compatible with
the vehicle before installing
it. See “Accessories and
Modifications” in the Index of
the vehicle’s owner manual.
14 Infotainment System

Playing the Radio
O(Power/Volume): Press this
knob to turn the audio system
on and off. Turn the knob to
increase or to decrease the volume.
f(Tuning/Sound Knob): Turn
this knob to go to the next or
previous frequency.
Press this knob to display the
Sound menu. See “Sound Menu”
later in this section.
AUDIO: Press this key to display
the audio screen. Press the
key to switch between AM, FM, or
XM, if equipped, DISC, or AUX
(Auxiliary), or touch the screen
button. See AM-FM Radio on
page 14,Satellite Radio on page 22,
CD/DVD Player on page 25, and
Auxiliary Devices on page 44
for more information.
Finding a Station
If viewing a map screen, touch the
source screen (AM, FM, XM,
CD, etc.) button. The display will
split between the audio screen and
the map screen. All station-changing
functions can be performed from
this screen.
If you do not want to view a split
screen or you are not on a map
screen, press the AUDIO hard key.
AM/FM/XM: Touch the source
(AM, FM, or XM, if equipped) screen
button or press the AUDIO key
repeatedly until the desired source
is highlighted.
FM source shown,
other sources similar
FM source shown,
other sources similar
Infotainment System 15

Category: Touch the screen
button, located in the middle of the
screen, to receive a list of all of
the selected band stations in
the area. Use the up and down
arrow screen buttons to scroll the
frequencies. Touch the desired
frequency.
FM lists may also contain a category
to select if stations in your area
support Radio Data Systems (RDS).
$Refresh List: Touch this
screen button to refresh the list of
stations.
When viewing a map screen, the
name of the station or channel
will appear on the display.
¨SEEK / ©SEEK: To seek
stations, press the left or right arrow
keys to go to the next or previous
station and stay there.
To scan stations, press and
hold either arrow for more than
two seconds. The radio will go to a
station, play for a few seconds,
then go on to the next station.
To stop scanning, press either
arrow again.
Storing Radio Station Presets
This feature allows you to store
up to 30 preset stations. See
“Number of Preset Pages” under
“Radio Menu” later in this section
for more information. You can mix
AM, FM, and XM (if equipped).
To store presets, do the following:
1. Press the O(power) knob to turn
the system on.
2. If viewing a map screen, touch
the source screen button,
press the AUDIO key, or press
the FAV (favorite) key.
3. Select the band.
4. Seek, scan, or tune to the desired
station, to select the station.
5. Press and hold one of the preset
screen buttons for more than
two seconds or until you hear
a beep.
6. Repeat the steps for each preset.
FM source shown,
other sources similar
16 Infotainment System

Sound Menu
f(Sound Menu): Press this knob
or press the MENU key to access
the Sound menu to adjust the treble,
midrange, bass, fade, balance,
and equalization or Digital Signal
Processing (DSP), if equipped with
the Bose
®
sound system.
Setting the Tone
TREBLE: Touch the plus (+) or
minus (−) sign to increase or
decrease the treble. If a station is
weak or noisy, decrease the treble.
MID (Midrange): Touch the plus (+)
or minus (−) sign to increase or
decrease the midrange.
BASS: Touch the plus (+) or
minus (−) sign to increase or
decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance):
To adjust the balance between the
left and the right speakers, touch
and hold the L or R screen buttons.
To center the balance and the
fade, touch the center, where the
two lines meet.
Front/Rear (Fade): To adjust the
fade between the front and the
rear speakers, touch and hold the
Front or Rear screen buttons.
To center the balance and the fade,
touch the center, where the two
lines meet.
Automatic Equalization
If the system has automatic
equalization, you can select
customized equalization settings
designed for Talk. Touch the
Talk screen button to hear the
change in sound. The system will
save the setting for each source.
To not use the automatic
equalization setting, press any of
the screen buttons that will change
the treble, midrange, bass, balance,
or fade. This will take the system
out of the equalization setting so that
you can create your own sound.
Digital Signal Processing (DSP)
shown, Equalization similar
Infotainment System 17

Digital Signal Processing (DSP)
If the system has Digital Signal
Processing (DSP), DSP is used to
provide a choice of four different
listening experiences. DSP can be
used while listening to the audio
system. The type of DSP selected is
displayed on the status line.
Select from the following DSP
settings:
Normal: Select this screen button to
adjust the audio to be in normal
mode. This provides the best sound
quality for all seating positions.
Surround (Centerpoint
®
): Select
this screen button to turn on Bose
Centerpoint
®
signal processing
circuitry. Centerpoint
®
produces
a full vehicle surround sound
listening experience from a CD,
MP3/WMA, DVD, or XM stereo
digital audio source and delivers five
independent audio channels from
the conventional two channel stereo
recordings. This is not available
for AM or FM.
Driver: Select this screen button to
adjust the audio to give the driver
the best possible sound quality.
Rear: Select this screen button to
adjust the audio to give the rear seat
occupants the best possible sound
quality.
The 2 CH and 5.1 CH buttons are
available only when a 5.1 CH disk is
available and RSA is off.
2 CH (Channel): Select this screen
button to enhance surround sound.
The Surround screen button must
be selected to select the 2 CH
screen button.
5.1 CH (Channel): Select this
screen button, when listening to a
DVD, to give a full affect of surround
sound listening. The Surround
screen button must be selected to
select the 5.1 CH screen button.
Downmix: If a 5.1CH disk is
playing, and the 2 CH screen button
is selected or RSA is turned on,
the system will downmix the audio
from 5.1 CH to 2 CH if this feature is
supported on the disk.
18 Infotainment System

Radio Menu
Press the MENU key to enter the
menu screen, then press the
MENU key repeatedly until Radio is
selected or touch the Radio screen
button to make changes for radio
information displayed or to limit
features while driving, number of
preset pages, XM categories,
and Automatic Volume Control or
Bose
®
AudioPilot
®
.
Additional Information Displayed
The navigation system may have
this feature.
Touch the 4Additional Information
Displayed screen button to turn
station, channel, CD, and MP3
information on or off.
Touch the YES screen button to
receive information, when it is
available, for the following; FM: RDS
category name and radio text,
XM: Song Title and Artist Name,
CD: CD text, MP3: tag information.
Touch the NO screen button to
receive no information.
Limit Features While Driving
The navigation system may have
this feature.
Touch the Limit Features While
Driving screen button to turn on and
off the ability to limit functions
while driving. When this screen
button is highlighted, the following
functions will be limited while driving:
•Music Navigator Scrolling
•Radio Category Scrolling
•Navigation Menu Scrolling and
some functions
See “Category” earlier in this
section for more information.
See “From Map” under Destination
on page 68 for more information.
Infotainment System 19

Number of Preset Pages
Touch the /Number of Preset
Pages screen button to change
the number of preset pages,
1 through 6. Each preset page
can contain five preset stations.
Touch the desired numbered
screen button.
Automatic Volume Control or
Bose AudioPilot
®
>Automatic Volume Control:
With automatic volume control,
your audio system adjusts
automatically to make up for road
and wind noise as you drive.
To use Automatic Volume Control:
1. Set the volume at the desired
level.
2. Press the MENU key to enter
the menu screen, then press
the MENU key repeatedly
until Radio is selected or touch
the Radio screen button
3. Press the >Automatic Volume
Control screen button to access
the Speed Compensated
Volume screen.
4. Touch the Low, Medium, or
High screen buttons.
Each higher setting allows
for more compensation at
faster vehicle speeds.
Then, as you drive, automatic
volume control automatically
increases the volume, as necessary,
to overcome noise at any speed.
The volume level should always
sound the same to you as you drive.
To turn automatic volume control
off, touch the OFF screen button.
AudioPilot: If the system has
the Bose
®
sound system it may
include Bose AudioPilot
®
noise
compensation technology.
To use AudioPilot
®
:
1. Press the MENU key to enter the
menu screen, then press the
MENU key repeatedly until Radio
is selected or touch the Radio
screen button.
2. Press the >Automatic Volume
Control screen button to access
the AudioPilot menu.
3. Press the ON screen button.
To turn it off, touch the OFF screen
button.
20 Infotainment System