Chicago Electric 61888 User manual

WARNING To prevent serious injury, read manual warnings and instructions before use.
BASIC WELDING INSTRUCTIONS AND WELDING TIPS ARE IN MANUAL.
welding
wire
Wire Spool
2″
Contact
Tip
Nozzle
MIG 170
WIRE FEED WELDER
ITEM 61888
WIRE FEED SPEED
20A
240VAC
Specications
Wire 0.023″-0.035″
(Tip and roller change required)
Capacity 22 Ga. – 1/4″ Steel Plate
Material
Types
Mild Steel and Stainless Steel
(Not for welding Aluminum.)
I
O
MIG 170
WIRE FEED WELDER
ITEM 61888
WIRE FEED SPEED
20A
240VAC
Specications
Wire 0.023″-0.035″
(Tip and roller change required)
Capacity 22 Ga. – 1/4″ Steel Plate
Material
Types
Mild Steel and Stainless Steel
(Not for welding Aluminum.)
I
O
HOLD
GUN
CLEAR
2″-3″
wood
block
clockwise
WARNING
To prevent re and
serious injury:
Keep torch and
wire clear of
grounded objects
while welder
plugged in.
Spool Knob
Wire Spool
Lower
Spool Plate
Upper
Spool Plate
Spool Spring
Spool Spindle

weld
slower
maintain
less
than 1/2"
stickout
MIG 170
WIRE FEED WELDER
ITEM 61888
WIRE FEED SPEED
20A
240VAC
Specications
Wire 0.023″-0.035″
(Tip and roller change required)
Capacity 22 Ga. – 1/4″ Steel Plate Material Types
Mild Steel and Stainless Steel (Not for welding Aluminum.)
I
O
MIG 170
WIRE FEED WELDER
ITEM 61888
WIRE FEED SPEED
20A
240VAC
Specications
Wire 0.023″-0.035″
(Tip and roller change required)
Capacity 22 Ga. – 1/4″ Steel Plate Material Types
Mild Steel and Stainless Steel (Not for welding Aluminum.)
I
O