Chima SVG200SP+ User manual

SVG200SP+ SIP/IAX ATA Quick Start Guide
陈泽科技有限公司 www.stephen-tele.c m
SVG200SP+ Quick Start Guide
Installati n and access: .................................................................................................. 2
C nfigure SVG200SP+ t make V IP calls ...................................................................... 3
WAN C nfig .................................................................................................................... 3
SIP C nfig ....................................................................................................................... 4
IAXC nfig ........................................................................................................................ 5
STEPHEN TECHNOLOGIES CO.,LIMITED
ALL RIGHTS RESERVED

SVG200SP+ SIP/IAX ATA Quick Start Guide
陈泽科技有限公司 www.stephen-tele.c m
Installation and access:
Installati n:
C nnected SVG200SP+ as bel w:
Listen SVG200SP+ IP fr m the handset ：
----pick up the handset ；
----enter #*111#;
Then the handset will clue SVG200SP+’s IP address 。
M dify y ur c mputer’s IP address t the same netw rk as SVG200SP+.
Key in SVG200SP+’s IP address in the web br wser and press enter, then y u can access SVG200SP+’s web manage interface.
Remember the acc unt is admin/admin f r administrat r and guest/guest f r user.

SVG200SP+ SIP/IAX ATA Quick Start Guide
陈泽科技有限公司 www.stephen-tele.c m
Configure SVG200SP+ to make VoIP calls
WAN Config
Enter Network 

 WAN Config t set the WAN setting:
SVG200SP+ supp rts three different IP types: Static IP, Dynamic btain IP (DHCP) and PPP E. Y u can use either f these IP
types t c nnect the internet.
se Static IP:
----Select “Static”;
----Enter the SVG200SP+’s IP address in the “IP address” field.
----Set the “Netmask”, default 255.255.255.0
----Enter the SVG200SP+’s upper gateway IP address(f r example:R uter) in the “Gateway” field
----Key in the DNS inf rmati n in the “Primary DNS” and “Alter DNS” fields.
se DHCP:
----Select DHCP
If y u have a DHCP server in y ur netw rk, SVG200SP+ will aut matically btain the netw rk inf rmati n fr m y ur DHCP
server.
se PPPoE:
----Select PPP E
----Type y ur PPP E dialup inf rmati n in the PPP E setting fields:PPP E server( pti n), Username and passw rd.
Then the SVG200SP+ will c nnect t the internet thr ugh PPP E , and aut matically btain the 则 IP address , Netmask,
Gateway, Primary DNS and Alter DNS inf rmati n.

SVG200SP+ SIP/IAX ATA Quick Start Guide
陈泽科技有限公司 www.stephen-tele.c m
SIP Config
Enter VoIP 

 SIP Config setting page and set the sip inf rmati n
----Register Server Addr : sip server address;
----Register Server P rt : sip serverre register p rt;
----Register Username : username f y ur sip acc unt;
----Register Passw rd : passw rd f y ur sip acc unt;
----Register Number : Ph ne number f y ur sip acc unt; the same as username if n ne
----check Enable Register ；
Then y u can make V IP calls if the WAN and SIP c nfig is c rrect.
N tice: Please g t the “C nfig Manage” and save the c nfig, therwise y u will l se the setting after device reb t.

SVG200SP+ SIP/IAX ATA Quick Start Guide
陈泽科技有限公司 www.stephen-tele.c m
IAX Config
-----IAX Server Addr: IAX server address;
-----IAX Server P rt: IAX server register p rt;
-----Acc unt Name: username f y ur IAX acc unt;
-----Acc unt Passw rd: Passw rd f y ur IAX acc unt.
-----L cal p rt: Signal p rt f l cal,default p rt is 4569
-----Ph ne Number: Ph ne number f y ur IAX acc unt; the same as username if n ne
-----Enable Register: enable r disable register
-----IAX(Default Pr t c l): If y u want t use IAX acc unt t call ,please select IAX(Default Pr t c l), if n t the system will
ch se SIP as default
Then y u can make V IP calls if the WAN and IAX c nfig is c rrect.
N tice: Please g t the “C nfig Manage” and save the c nfig, therwise y u will l se the setting after device reb t.