3. Explanation of the status icons
No Function Description
13D card indicator B Photowillbestored inmicroSDcard
2Battery indicator !
CBattery is full
Empty battery
3Effect indicator Color or Mono
4Countion indicator Show Scanned files in microSD card
53elected resolutiol Hioh: 600dDi / Low: 300 dpi
C. Formatting the microSD memory card
1. lnsert a ne-w microsD card into the scanner, then turn on the scanner
2. iress the format button into format mode. [F] shows on the LCD'
i. Press the Power/Scan button to start formatting the microsD card'
4. SD card indicatorwill blink untilformat is complete'
B. Setting the resolution
eressltre 1Oet1 button to select High/low resolution- ^-
High/Low iesoiution icon will be dislayed on status LCD'
D. Setting the scan mde
Press-the [C/BW] button to select Color/Mono mode'
Color/Mono icon will be displayed on status LCD'
E. How to scan
Hold the document firmly by one hand.
Place the scanner on the start-scanning position'
Hold the scanner tight and press the scan button once'
Slide the scanner stowty and keep your hand stable to get the best
quality pictures.
Pressthe scan button again to stop scanning'
4. Using the scanner
A. lnstalling the batterY
1. Open the battery door.
2. lniert 2XAAA al'kaline batteries into the battery compartment'
3. Turn on the scanner by pressing the I Power] button for 2 seconds'
&'.
\>r
\N<--
v
B. lnserting a microSD memory car(not included)
You musi insert a microSD card(not supplied) to record and store
your pictures. lnserting the microSD memory card:
1. Turn OFF the scanner.
2. lnsert the microSd card into the microSD card slot, gently press in
until card is latched.
Note: Do not force the card into the slot; forcing may damage scanner
and the microSD memory card. Align microSD card position
(as marked) and trY again.
Note: ihe microsb memorycar must be formatted before scanning'
See the following instruction.
))
I
)
