USB Keylogger User Manual
Recording Mode: (Support any systems)
Please connect the USB key logger to your
computer host and USB keyboard as above
picture, it will start recording automatically.
Playback Mode: (Support Windows XP Vista
Wndows 7, do not support MAC)
Please connect the USB key logger with
computer host and USB keyboard as recording
mode, enter password "adm88", and wait for
2-3 seconds, the keyboard will be invalid, the
system will recognize the USB key logger as a
movable U disk, click "My Computer" on
desktop, it will display as a movable U disk, you
can double click to open it, it will display as
below:
All keystrokes are save as "20101106.txt" the
recording file format save with year, month and
day, will change the file name day by day, to
easy to find out the keystrokes.
The file "LIST.txf is config file to setting the
password and date and time, below is the
contents:
2010-09-11 RevO.1
['1]adm88
//Passyord Setting
[2](0)201Gfiry 23:47:30 llTime
Setting (modify'(0)" to "(1)" to active setting)
[3]*0 1 23456789abcdefgh ij klm nopq rstuvwxyz"
* llThe use of the character
"[1] adm88" is the password, you can change
"adm88" to your password.
Tips: the super password is "wuw88", you can
not change it, please keep this password in
secure.
"12)(0)2010-11-O4 23'.47:30" is setting the date
and time, you have to modify "(0)" to "(1)" to
active setting, to modify the date and time as
this format
hour:m inute:second".
. [3]***0 1 23456789abcdefgh ij kl m nopqrstuvwxyz
***' is for copy and paste the characters for
password and date time modify, because the
keyboard was invalid during playback mode.
Note:After modified please save and exit.
The file .FANNAL.txt" is show the cunent date
and time of the key logger, only for reference
propose.
Allfiles are can be deleted. it will create on next
time automatically.
Quit the playback mode:
To quit the playback mode please click quit the
USB flash drive as a normal U disk, please do
not just plug it out without safe quit. lt will
damage the key logger, after removed please
press 'ESC" key to release the keyboard then
go to "Record mode".
"year-month-date
