CHITA AC72901 User manual

Assembly Manual
AC72901
AC72901 Assembly Manual
Accent Chair
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
Page 1 of 9
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
CAUTION

Please read through the instructions below to familiarize yourself with the
parts and steps before assembly.
Assembly Manual
AC72901
Page 2 of 9
Ax1 Bx1 Cx1 Dx2
Ex1 Fx1 Lx1 Rx1
Gx10 Hx6 Ix2 Jx2
Mx1 Nx4
Kx2
M6 x 16mm Bolt
Spring Washer
Bolt
Allen Wrench Felt Pad
Bolt Flat Washer
M6 15mm
M6 x 20mm M6 x 18mm M6
4#
Note: Do NOT use power tools for assembly.
Back Cushion
X-Shaped Frame Front Leg Left Back Leg Right Back Leg
Seat Cushion Seat & Back Wood Arm

Assembly Manual
AC72901
Page 3 of 9
ASSEMBLY INSTRUCTIONS
C
F
MG
C
100%
Seat
Seat
Back
Detach the Velcro at the front of the Seat (C)
Insert Front Leg (F) into Seat (C). Please insert both sides at the same
time and apply some pressure. Attach both sides of Front Leg (F) to
Seat (C), using Bolts (G) and Allen Wrench (M). Fully tighten.

Assembly Manual
AC72901
Page 4 of 9
C
Seat
Attach the Velcro as shown below.
Attach the square metal plates on Front Leg (F) to Seat (C), using Bolts
(I), Lock Washers (K), Flat Washers (J) and Allen Wrench (M). Fully
tighten.
F
MI
J
K
C
100%

Assembly Manual
AC72901
Page 5 of 9
MG
L
R
C
80%
5
G
M
6
80%
E
Attach X-Shaped Frame (E) to assembled chair legs, using Bolts (G)
and Allen Wrench (M).
Attach Left Back Leg (L) and Right Back Leg (R) to Seat (C), using Bolts
(G) and Allen Wrench (M). Do not fully tighten yet.
Note: Please make sure the arrow should face the front side of the
chair. Do not fully tighten yet.
Front
LR

Assembly Manual
AC72901
Page 6 of 9
100%
7
H
Step1
Step2
M
H
M
8
D
D
H
M
C
Attach Wood Arms (D) to front legs and back legs, using Bolts (H) and
Allen Wrench (M). Start with bolts at the front legs and then move on
to the bolts at the back legs.
Attach Wood Arms (D) to Back (C), using Bolts (H) and Allen Wrench
(M). Fully tighten.
Do not fully tighten yet.
Seat
Back
80%
80%
D
D

Assembly Manual
AC72901
Page 7 of 9
100%
M
9
10
N
Complimentary Felt Pads (N) are included to help protect your floor or
make the stool slide easier.
Use Allen Wrench (M) to fully tighten all bolts in Step 5, 6, and 8 (Ten
bolts in total).

Assembly Manual
AC72901
Page 8 of 9
11
12
Turn assembled chair upright and place on a flat surface.
Put Seat Cushion (B) and Back Cushion (A) on the chair.
Note: Each leg has an adjustable foot leveler to help level your chair.
B
A

Assembly Manual
AC72901
Page 9 of 9
13
Assembly complete. Enjoy.