CHITA BS72172 User manual

BS72172 Assembly Manual
Counter & Bar Height Swivel Stool
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual
BS72172
CAUTION
Page 1 of 6

BS72172
Assembly Manual
Page 2 of 6
A1×1
B2×1
A2×1 B1×1
C×1 D×1
E×1
H3×8
M6x25mm
M6mmφ6xφ18x1.5mm
H1×8 H2×4
H4×8
M6x40mm
Please read through the instructions below to familiarize yourself with the
parts and steps before assembly.
T2×1
T1×1
4mm
5mm

BS72172
ASSEMBLY INSTRUCTIONS
Assembly Manual
Page 3 of 6
2
A1
B1
B2
A2
D
H2
D
Connect Leg (A1) and Leg (A2), Leg (B1) and Leg (B2) together to get
the stool base.
Attach Foot Ring (D) to assembled stool base in Step 1. Loosely attach
the Bolts (H2) one by one and keep them loose. Do not fully tighten.
After loosely attach the first bolt, move on to the diagonal bolt. After
all 4 bolts are attached, use Allen Wrench (T2) to tighten.
Note: Do NOT use power tools for assembly.
x4
x4
H2
H2 T2

BS72172
Assembly Manual
Page 4 of 6
3
Rotate the swivel plate by 45 degree first.
C
Flip over the stool base. Attach Swivel Plate (C) to assembled stool base
in Step 2, using short Bolts (H1), Lock Washers (H3), Flat Washers (H4) and
Allen Wrench (T1).
Note: Do not fully tighten yet.
x4
T1
H1
H3
H4
Put assembled stool base in Step 3 on a flat surface. Push legs up or
down as necessary to level. Once level, fully tighten all bolts.

Page 5 of 6
BS72172
Foot levelers
Assembly Manual
6
5
E
CAUTION:PINCH POINT.
Please keep hands clear during swivel.
Attach the assembled stool base in Step 4 to the Seat Bucket (E), using
short Bolts (H1), Lock Washers (H3), Flat Washers (H4) and Allen Wrench
(T1). Fully tighten all bolts.
Assembly complete. Enjoy.
Note: Each leg has an adjustable foot leveler to help level your chair.
x4
T1
H1
H3
H4
C

BS72172
Page 6 of 6
Assembly Manual
CARE & MAINTENANCE
Water Based Cleaner ‘W’: Spot clean using the foam only from a wa-
ter-based cleaning agent such as a mild detergent or non-solvent uphol-
stery shampoo product. Apply foam with a soft in circular motion.
Vaccum when dry.
Do not place furniture in direct sunlight and keep furniture at least 60 cm /
2 feet from heat sources to avoid fading.
PRODUCT WARRANTY
· 1-year limited on cover against splitting, peeling, and/or tearing.
· 1-year limited on internal and external frame structure.
· 1-year limited on cushioning material, seat springs and mechanism.
@chitaliving
@chitaliving
If at any step you need a helping hand, we're always here for you. You can
email us, or hop into a live chat on our website - whatever method is con-
venient for you.
[email protected]
@chitalivingofficial
@chitaliving
Follow Us