Chris & Chris JET 7751 User manual

JETRICH CANADA LTD: 3270 Orlando Dr., Mississauga, Ontario, L4V 1C6, CANADA
Thank you for purchasing the Chris & Chris Chef series kitchen work station.
With proper assembly, maintenance, and cleaning, your work station will give you many years of service.
NOTE: IF THERE ARE ANY PARTS MISSING; OR THERE IS SLIGHT SHIPPING DAMAGE TO YOUR UNIT, DO NOT
RETURN TO THE STORE. PLEASE CONTACT OUR CUSTOMER SERVICE DEPT. FOR HELP, OR VISIT OUR WEBSITE
FOR FURTHER INFORMATION.
CUSTOMER SERVICE: TOLL FREE NUMBER: 1-800-569-4201
E-MAIL: [email protected]
WEBSITE: chrisandchrishome.com
Tools needed: Phillips Head Screw driver
ASSEMBLY TIPS: JET7751 / JET7752 / JET7753 CHEF SERIES WORK STATION
• Unpack all parts carefully and inspect
• Cover work surface with soft blanket or similar substance so as not to damage the unit or the work surface.
• Remove any parts that may be packed in the drawers
Step 1
• Lay top panel Assembly (C) upside down on stable surface.
• Attach the 4 legs (B) to top assembly (C ) making sure that they are positioned in the correct locations.( LB) left back (RB) right
back (LF) left front and (RF) right front. Using barrel bolts (YL) and barrel nuts (BN) on the front legs, and short bolts (M) and
washers (ZA) on the back legs. DO NOT TIGHTEN AT THIS TIME.
• Note: you will need to extend the drawers to accomplish the above.
• Attach the upper shelf (A) to the legs with small bolts (SM) using the holes nearest the top frame (C ). Do not tighten at this time
• Attach the lower shelf (A) to the legs with small bolts (SM) using the holes nearest bottom of the legs. Tighten all bolts at this
time.
Step 2
Install the brake wheels (BW) to the front legs and the standard wheels (W) to the back legs
Slide the small end of the 4 “S” hooks (K) over the towel bar (F) NOTE: The smaller end of the “S” hooks should be over the bar
so they cannot be removed after assembly.
Attach the towel bar (F) to the leg assembly using bolts (M). The drawer must be fully opened for this assembly. You may
choose to assemble the towel bar (F) to either side. Cover the holes on the opposite side from the towel bar with wood plugs
(WP).
Step 3
Turn cart right side up.
• Install the 2 drawer handles (J) to the drawer fronts using bolts (O) and a Phillips head screw driver Please note that drawer
handles (J)and bolts (O) are currently installed on the inside of the drawer for shipment.
• Set speed rack (S) into the towel bar (F).
Step 4
• Insert chef pan (P) into opening in the back panel of top frame (C)
• Trash ring (L) can be substituted for Chef pan (P).
• Pull a plastic trash bag or common plastic grocery bag up through the middle of trash ring (L) and wrap around sides.
• Slide trash ring (L) into opening in back panel of top frame (C).
CONGRATULATIONS
Your Chef Work and Storage station is now ready for years of service.

ASSEMBLY INSTRUCTION
C. TOP ASSEMBLY A. BASKET SHELF
B. LEGS
LF RFLB RB
1 EACH 2 EACH
1 EACH
S. SPEED RACK
1 EACH
F. TOWER BAR
4 EACH
J. HANDLE L. TRASH RING P. CHEF PAN K. "S" HOOK
4 EACH1 EACH1 EACH2 EACH
BW. BRAKE
WHEEL W. WHEEL
2 EACH 2 EACH
YL. LONG
BAREL BOLT
2 EACH
M. SHORT
BOLT BN. BAREL
NUT
6 EACH 2 EACH
Q. WRENCH
1 EACH 1 EACH
RM. ALLEN KEY O. OIL
1 EACH
OIL
ZA. WASHER
6 EACH
WP. WOOD
PLUS
4 EACH
SM. SMALL
BOLT
16 EACH

LF
C