Panasonic Toughbook CF-18 Series Wiring diagram

Supplementary Instructions
Personal Computer
This Supplementary Instructions points out cases where the operation of the computer will differ from that in the Operating
Instructions and the Reference Manual.
NOTE:NOTE provides a useful fact or helpful information.
CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.
[start] - [Run]: This illustration means to click [Start], then to click [Run].
(For some applications, you may need to double-click.)
Illustrations and Terminology in this Manual
Model No. CF-18 Series
This computer is equipped with a smart card slot enabling you to use the security functions that, for instance, prohibit the unautho-
rized use of the computer by anyone who does not have a smart card.
To use a smart card, a special software application is necessary.
Do not bend the card or force it into the slot.
Do not touch the contact area or press down on it forcefully. Otherwise, the card may no longer work properly.
Do not leave the card in the high temperature environment for a long period of time. The card may be deformed.
For other details on how to handle the card, refer to the instructions that accompany the card.
The smart card slot is underneath the PC Card slot.
1 Unlock the cover by sliding the latch to the right.
2 Slide the latch down, and then without releasing it, open the
cover as illustrated.
Using the Smart Card
CAUTION
Inserting/Removing
Latch
Cover

Dealing with Problems (Advanced) “Reference Manual”
Add the following.
A smart card cannot be
used
Confirm that the smart card has been properly inserted.
To use a smart card, a special software application is necessary.
Smart Card
PC Card Slot
Allowable current
Smart Card Slot
Specifications “Operating Instructions”
The specifications of this computer’s PC Card slot and smart card slot are given below.
One Type Ior Type II
3.3 V: 400 mA, 5 V: 400 mA
1 slot
Eject Button
Smart Card Slot
3 Insert/Remove the smart card.
Inserting the smart card
1Align the smart card so that the location of the contact is as shown in the figure on
the left, and then insert the card all the way into the slot.
Removing the smart card
1Press the eject button, and then press the button again.
The smart card will come out of the slot a little bit.
2Slide the smart card out.
4 Close the cover until it clicks into place.
5 Lock the cover by sliding the latch to the left.
Do not remove the card immediately after inserting it. If you do so, the card may
not be recognized when it is inserted the next time. If this happens, remove the
card, and then insert it again.
CAUTION
Remove the smart card only with the eject button. If you pull the smart card
without using the eject button, it may cause damage to the reader contact.
CAUTION
Contact
Smart Card
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Japan
FJ1005-0
DFQX1608ZA
*DFQX1608ZA*