Christopher Ward C63 SH21 Blue Marine User guide

C63 SH21 Blue Marine
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
1

2222

3
C63 SH21 Blue Marine Limited Edition
Congratulations on the purchase of your new C63 SH21 Blue Marine.
This is a watch that will not only give you years of pleasure, but whose
legacy will be the health and ongoing recovery of the oceans.
Five percent from the cost of your watch has been donated to Blue
Marine Foundation, a charity dedicated to preserving, restoring and
advocating for the seas.
But this watch doesn’t just represent a good deed. It’s also an
outstanding timepiece in its own right.
The movement powering your watch, Calibre SH21, is amongst the
best available: thanks to its twin-barrel architecture, it boasts a ve-
day power reserve, which means you can take it o for ve days and
it’ll keep on ticking. And because it’s a chronometer, it’s in the top
six percent of Swiss-made watches for accuracy.
So wherever you take your C63 SH21 Blue Marine – and it’s hard
to think of anywhere it wouldn’t be happy, with water resistance
to 150m – you’ll know that it’s not just playing its part in the
preservation of the seas, but also making sure you’re as punctual
as you want to be, whatever time or tide throws at you.
3

444

5
How to operate your C63 SH21 Blue Marine
Crown
Date Window
Minute Hand
Hour Hand
Power Reserve
Seconds Hand
Your C63 SH21 Blue Marine has a maximum power reserve of 120
hours when fully wound. To re-power the watch after a period of
non-use, simply wind the crown for approximately 40 revolutions.
Normal wearing will very quickly allow the rotor to start re-powering
the watch over time after putting it on your wrist.
Display and controls
5

6
Features
• Swiss made
• Limited edition of 150 pieces
• In-house 33 jewel Calibre SH21 automatic
movement
• Chronometer (COSC) certied
• 120-hour power reserve
• Anti-shock system
• Hacking small seconds
• Date calendar
• Power reserve indicator
• Brushed and polished marine-grade
stainless steel case
• Custom exhibition caseback with limited
edition number
• Circular brushed and polished xed steel
bezel
• Embossed screw-down crown
• Anti-reective sapphire crystal
• Stamped matte dial with wave pattern
reecting Blue Marine’s logo
• Top-brushed indexes with diamond
polished facets
• Brushed and polished hands
• Super-LumiNova®Grade X1 BL C1-lled
hands and indexes
• Eco-friendly luxury presentation case
and owner’s handbook
6

7
Technical Information
Calibre SH21 Automatic Chronometer (COSC)
Case Stainless steel
Diameter 41mm
Height 13.10mm
Lug to lug 48.20mm
Weight 80g
Water resistance 15 ATM (150 metres)
Vibrations 28,800 per hour (4Hz)
Timing tolerance -4/+6 seconds per day
Strap width 22mm
7

88
How to operate your C63 SH21 Blue Marine
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C63 SH21 Blue Marine has a maximum power
reserve of 120 hours when fully wound.
• Pull gently into position 3. For rapid date correction, turn in an
anti-clockwise direction.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date

999
1 2 3 4
Unscrew and then pull
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
1. Crown screw-down position
2. Manual winding
3.Date setting
4.Time setting
9