Christopher Ward C60 Trident Pro 600 User guide

C60 Trident
Chronograph Pro 600
Owner’s handbook

1
Your Christopher Ward watch has been designed and
engineered by highly talented craftspeople to ensure
not only accurate and precise timekeeping but also
to bring a real pride of ownership that only luxury
items of the highest quality can ever hope to deliver.
You have made an investment, a good one,
and the aim of this handbook is to help you
make the most of that investment during what
I hope will be a lifetime of ownership.
Christopher Ward
Time on your side...
Introduction
Contents
C60 Trident Chronograph Pro 600 2–3
Technical information 4–5
How to operate your C60 Trident
Chronograph 6–13
Our watch care programme 15
Keeping in touch 16

2
C60 Trident Chronograph Pro
C60 Trident Chronograph Pro 600
Built to the most exacting standards, the
C60 Trident Chronograph Pro 600 is a watch
created for diving professionals that even
non-swimmers will covet.
The boldness of the deep navy and metallic yellow
dial design catches the eye immediately and upon
closer inspection it is easy to be impressed with the
intricacies of what may be our most detailed dial to
date. Worthy of special attention is the 60 seconds
sub-dial which “breathes” via a rotating disc behind
a cut-out display delivering ease of reading for the
diver as well as a fascinating appeal for the more
casual wearer.
The uni-directional ceramic bezel has been enhanced
with the professional diver in mind by the addition
of a full minute-track, and a better dened font
for the numerals which are lled with high-grade
Super-Luminova®for outstanding luminosity.
Engineered to resist water at up to depths of 600
metres (2000 feet) the uid contours of the Trident
case, which also incorporates an automatic helium
release valve, surround one of the most reliable and
robust chronograph movements, the self-winding
ETA Valjoux 7750.
All told, therefore, this is a remarkable watch that
signals another milestone in an unfolding story
that positions Christopher Ward in the vanguard of
British watch design.

3

4
C60 Trident Chronograph Pro
Features
– Swiss made
– 25 jewel self-winding elaboré-grade
mechanical chronograph
– 48 hour power reserve
– Hour, minute, second and date calendar
with 60 seconds, 30 minutes and 12 hours
chronograph indication
– Anti-shock system
– Screw-in crown and chronograph pushers
– Uni-directional zirconia (ZrO2) ceramic bezel
– Integrated automatic helium release valve
– 3.4mm anti-reflective sapphire crystal
– Super-Luminova®dial indexes, hands and
bezel markers
– Breathing regulator-inspired small second disc
– Deep blue and yellow guilloche wave pattern dial
– Signature Trident counter-balance on seconds
hand
– Screw-down deep-stamped 3D backplate
– Unique engraved serial number
Technical information
Technical
Diameter: 43mm
Height: 17.10mm
Weight: 131g
Calibre: ETA 7750
Case: 316L stainless steel
Water Resistance: 60 ATM (600 metres)
Vibrations: 28,800 per hour (4 Hz)
Timing Tolerance: ±15 seconds per day
Lug to lug: 51.5mm
Strap: 22mm

55

6
How to operate your C60 Trident Chronograph Pro
Setting the time/date
1234
1. Crown screw-in position
2. Manual winding
3. Date setting
4. Time setting
Unscrew and then pull out

7
How to operate your C60 Trident Chronograph Pro
For a superior water resistance your crown is
of the screw-in type. The crown should sit
ush to the case (position
1 ) in order to maintain
water resistance.
• First unscrew the crown anti-clockwise from the
case to position
2 for winding in power. Wind in
a clockwise direction to re-power the watch.
Your C60 Trident has a maximum power reserve
of 48 hours when fully wound. Normal wearing
will allow the rotor to start re-powering the
watch over time after putting it on your wrist.
• For rapid date correction pull gently into position
3 and turn in a clockwise direction.
• Pull gently into position
4 for handsetting and
stopping of the second hand. For precise time
setting it is recommended to
pass beyond the desired minute and to set the
hand backwards.
PLEASE NOTE: Date correction should not be
carried out between 20.00 hr and 02.00 hr as
the watch gearing will already be aligning itself
to change the date.
You must always ensure the crown is fully
tightened before any use in water to prevent
moisture from entering the case.

8
How to operate your C60 Trident Chronograph Pro
Timing functions
START
PUSH-BUTTON A
START
STOP
1
21
1
2
1
2
First unscrew the pushers anti-clockwise from the
case into position
2 for starting, stopping, restarting
and resetting the timing mode.
Press push-button A to start timing.
To stop the timing, press push-button A once more
and read the 3 chronograph counters, for example:
2 hours /10 mins / 8 seconds.
Start Stop

How to operate your C60 Trident Chronograph Pro
99
PUSH-BUTTON B
RESTART
RESET
X
To restart the timing, press push-button A again
(timing is resumed).
To stop timing press push-button A and read
the 3 chronograph counters: 3 hours / 20 mins /20
seconds.
To reset the timing, press push-button B
(The 3 chronograph hands will be reset to
their zero positions).
NOTE: Do not operate the chronograph pushers
under water in order to prevent water entering the
mechanism. The pushers should sit flush to the case
(position 1) in order to maintain water resistance.
Restart/Stop Reset
START
STOP
1
2
3