Cinder CSC1NR-1K8-2-12 User manual

instruction manual
manuel d’instructions
sensing cooker

Product Model Number: CSC1NR-1K8-2-12
Rating: 120V ~60Hz 1800W
Bluetooth Version 4.0
FCC ID: 2AHJ8CINDER001
Last revision date: August 9, 2016
© 2016 Palate Home inc.

3
TABLE OF CONTENTS
Important Safety Precautions.............................5
Getting to Know Your Cinder............................15
Assembling Your Cinder..................................21
Operating Your Cinder....................................23
Cooking Tips.................................................29
Sample Recipes.............................................33
Care & Cleaning.............................................37
Troubleshooting.............................................41
Warranty.......................................................43

4
IMPORTANT SAFETY PRECAUTIONS
Thank you for your purchase of a Cinder Sensing Cooker.
For your safety, and the safety of others, carefully read all
instructions before use and save this document for future
reference.
Register your product for latest product upates or recall
information. More information at:
www.cindercooks.com/register
For product support, please contact Cinder Customer Care
telephone: +1-800-XXX-XXXX
e-mail: support@cindercooks.com

5
P
• Remove and safely dispose of any packaging material and
promotional labels before using the appliance for the first time.
• Do not place the cooker near the edge of a bench or table during
operation. Ensure the surface is level, clean, and free of water
and other substances.
• Do not use the cooker on a sink drain board.
• Do not place the cooker on or near a hot gas or electric burner, or
where it could touch a heated oven. Do not use inside a heated
oven.
• Position the cooker at a minimum distance of 8 inches (20cm)
away from walls, curtains, cloths, and other heat sensitive
materials.
• Always operate the cooker on a stable and heat resistant surface.
Do not use on a cloth-covered surface, near curtains, or other
flammable materials.
• Always ensure the cooker is properly assembled before use.
Follow the instructions provided in this instruction manual.
• The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
Read all instructions.

6
E S
• The appliance is not intended to be operated by means of an
external timer or separate remote control system other than the
official Cinder mobile application.
• To protect against electric shock, do not immerse or partially
immerse the cord, plugs, or appliance in water or any other
liquid.
• Do not operate the cooker with a damaged cord or plug, aer
the appliance malfunctions, or has been damaged in any manner.
Return the appliance to the nearest authorized service facility for
examination, repair, or adjustment.
• Do not let the cord hang over the edge of a bench or table, touch
hot surfaces, or become knotted.
• Check that the electrical installation is compatible with the
wattage and voltage stated on the bottom of the appliance.
• To ensure continued protection against risk of electric shock,
connect to properly grounded outlets only.
O S
• The lid and outer surfaces may be hot when the appliance
is operating. Do not touch hot surfaces. Always operate the
appliance using the handles or knobs.
• Do not place anything on top of the cooker when the lid is
closed, when in use, or when stored.

7
O S ()
• Always switch the appliance to the off state, then unplug the
power cord and cool completely if the appliance is not in
use, before cleaning, before moving the appliance, before
disassembling or assembling the appliance, or when storing the
appliance.
• Keep the cooker clean. Follow the cleaning instructions provided
in this instruction manual.
• When using the appliance on surfaces where heat may cause a
problem, an insulating mat is recommended.
• Do not operate the cooker without the drip tray in place and
sufficiently empty.
• Do not leave the appliance unattended when in use at
temperatures above 265°F (130°C)
• Do not leave the appliance plugged in when not in use.
• Do not place a hot cook plate in contact with water or on a fragile
surface.
• Not intended for use by children. Close supervision is necessary
when the appliance is use by or near children.
• The appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.

8
O S ()
• For any maintenance other than cleaning, visit www.
CinderCooks.com or call Cinder Customer Care.
• This appliance is intended for household use only. Do not use this
appliance for anything other than its intended use. Do not use
in moving vehicles or boats. Do not use outdoors. Misuse may
cause injury.
• Extreme caution must be used when moving an appliance
containing hot oil or other hot liquids.
• Do not spill any liquid on the plate connector or the areas behind
the cooking plates.
S C I
• Your Cinder is fitted with a short power supply cord to reduce the
risk of personal injury or property damage resulting from pulling,
tripping, or becoming entangled with a longer cord.
• If an extension cord is used,
1. The marked electrical rating of the cord set or extension
cord should be at least as great as the electrical rating of the
appliance.
2. The cord should be arranged so that it will not drape over the
countertop or table top where it can be pulled on by children
or tripped over unintentionally.
3. The extension cord must include a 3-prong grounding plug.

9
Save these instructions.
This appliance is intended for
household use only.
In cases of any commercial use, inappropriate use, or failure
to comply with the instructions, the manufacturer accepts no
responsibility and the guarantee will not apply.
For your safety, this product conforms to all applicable standards and
regulations.
Our company has a policy of ongoing research and development,
and may modify the product without prior notice. For the most
current version of instructions, visit www.CinderCooks.com.
• Do not consume food that comes into contact with the
parts marked with logo.

10
• Only use parts or accessories provided with the appliance or
bought from an Approved Service Center. Do not use them for
other appliances or intention.
• When using the appliance for the first time, wash the cook
plate(s), pour a small amount of cooking oil on the plate and then
wipe it with an absorbent kitchen towel.
• To avoid damaging the non-stick coating of the cooking plates,
always use plastic or wooden utensils.
• Do not use aluminum foil or other objects between the cooking
plates and the food being cooked.
• Do not place cooking utensils on the cooking surfaces of the
appliance.
• Do not cook food in aluminum foil.
• Do not remove the drip tray while cooking. If the drip tray
becomes full when cooking, let the appliance cool before
emptying.
• On first use, there may be a slight odor and small amount of
smoke during the first few minutes of heating. In these cases,
ensure adequate ventilation and wait until there is no more
smoke or odor before cooking.
• Cooking fumes may be dangerous for animals which have
particularly sensitive respiratory systems, such as birds. We
advise bird owners to keep them away from the cooking area.

11
F S
The Cinder Sensing Cooker is able to control the temperature of the
cooking plates very precisely, across a broad range of temperatures
(from ambient room temperature up to 500°F/260°C). Such
precision allows users to prepare foods with the latest techniques
in modern food science at lower temperatures than conventional
cooking techniques. However, precautions and research should
be done before performing such techniques to ensure food
safety and proper pathogen reduction. Users assume all risks and
responsibilities of ensuring their food is safe, and should always
check the temperature of the food with an internal probe before
consumption.
The USDA has recommended internal temperatures for guaranteed
safety as follows:
Product Minimum Internal Temperature
Beef, Pork, Veal, Lamb 145 °F (62.8°C)
Ground meats 160 °F (71.1°C)
Poultry 165°F (73.9°C)
Eggs 160 °F (71.1°C)
Fish & Shellfish 145°F (62.8°C)

12
Item Description
A Standby/wake button
B Control knob
C LED indicator light pipe
D User Interface LCD
E Wireless connectivity indicator light
H Upper cook plate release button
K Drip Tray
L Handle

13
GETTING TO KNOW YOUR CINDER
A
B
C
D
E
H
K
L

14
Item Description
A Standby/wake button
B Control knob
C LED indicator light pipe
D User Interface LCD
E Wireless connectivity indicator light
F Cook plate
G Lower cook plate release button
H Upper cook plate release button
J Grease channel
K Drip Tray
L Handle

15
B
D
E
J
A
K
G
F
L
H
F
C

16
NOTE
The Cinder has two plate release buttons. These allow the user to
independently unlatch and remove the cooking plates for easier
cleaning or to install interchangeable cooking plates.
To use the plate release:
• Always ensure the appliance is completely cool before
attempting to remove the cooking plates.
• Always ensure the cooking plates are free of liquid or large
scraps before attempting to remove. Wipe up excess liquid
with paper towels or sponge to prevent accidental spills.
• Li the handle and open the cooker to the fully open position.
• To remove the lower cooking plate, press the Lower Cook Plate
Release Button (G). Carefully slide the plate off the appliance
body.
• To remove the upper cooking plate, maintain grip of the upper
edge of the cooking plate, press the Upper Cook Plate Release
Button (H). Carefully remove the plate from the appliance.
CAUTION
Failure to hold the upper plate when releasing the latch mechanism
may result in the cooking plate falling off the grill in an uncontrolled
manner.

17
Before First Use
1. Remove and safely discard any packaging material and
promotional labels from the cooker.
2. Wipe the cooking plates and drip tray with a so damp sponge
or wash with mild soap and water. Dry all parts thoroughly.
3. Ensure the drip tray is properly installed in the appliance.
4. Ensure the cooking plates are correctly installed and securely
latched into position.
5. Place the cooker on a flat, dry surface. Ensure there is a
minimum of 8 inches (20cm) of space on all sides of the
appliance.
6. Unwind the power cord and insert the power plug into a
grounded wall outlet.
The Power/Standby button will illuminate when power is connected.
ASSEMBLING YOUR CINDER

18
NOTE
When the cooker is heating for the first time, it may emit a small
amount of smoke or odor. This is due to protective substances used
for manufacturing and shipping. It is safe and not detrimental to the
performance of the grill, but providing ample ventilation in the area
during the first heating cycle is recommended.
NOTE
If the cooking plates are not properly installed, the LCD will display
“Plate Removed”. Remove the cooking plates from the appliance
and re-install them so they securely lock into position. Always ensure
the appliance is completely cool before releasing and removing the
cooking plates.

19
OPERATING YOUR CINDER
Before cooking:
1. Ensure the drip tray is properly installed in the appliance.
2. Ensure the cooking plates are correctly installed and securely
latched into position.
3. Place the cooker on a flat, dry surface. Ensure there is a mini-
mum of 8 inches (20cm) of space on all sides of the appliance.
4. Unwind the power cord and insert the power plug into a
grounded wall outlet. The Power/Standby button will illumi-
nate when power is connected.
5. Press the Power/Standby button to begin cooking.
CAUTION
When opening and closing the cooking chamber, always li under
the handle or grap the edge of the handle. Do not place hands or
fingers behind the handle for risk of pinching or touching potentialy
hot surfaces.

20
To control the temperature of the cooker, users can use the following
input methods:
SOFWARE APPLICATION CONTROL
To use automated recipes and pre-defined temerature set points,
1. Download the app – on your mobile device, open http://Cin-
derCooks.com/app
2. Pair the Cinder –
• Power on the Cinder.
• Turn on Bluetooth on your mobile device.
• Open the app and follow the prompts on the screen to
complete the pairing process.
3. Using the Cinder app, select the corresponding recipe. Select
the option in the app to begin cooking.
4. The appliance will require confirmation of remote control over
wireless connection. Press the knob button to confirm
5. Follow the instructions shown in the app for recipe information
and cooking procedures.
To receive information of cooking progress and notifications, ensure
the mobile device stays within the signal range of the Cinder.
Depending on specific surroundings, the signal range is typically 30-
50 feet (9-15 meters).
Table of contents
Popular Cooker manuals by other brands

Logik
Logik LTOC50W12 Instruction & installation manual

Whirlpool
Whirlpool AKZM 779 User and maintenance guide

Stanley
Stanley FT20 G Installation & commissioning instructions

EURO
EURO GU 80 NG Installation and regulation

KVS MORAVIA
KVS MORAVIA TYPE 9100 Operation & maintenance manual

montpellier
montpellier MMRC60FC Installation and operating instructions