CipherLab 22 Series User manual

ScanMaster Web for Scanner Configuration
For 22/25 Series Barcode Scanners:
Version 1.02

Copyright © 2017~2018 CIPHERLAB CO., LTD.
All rights reserved
The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided
under a license agreement containing restrictions on use and disclosure and is also
protected by copyright law. Reverse engineering of the software is prohibited.
Due to continued product development this information may change without notice. The
information and intellectual property contained herein is confidential between CIPHERLAB
and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find
any problems in the documentation, please report them to us in writing. CIPHERLAB
does not warrant that this document is error-free.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise without the prior written permission of CIPHERLAB CO., LTD.
For product consultancy and technical support, please contact your local sales
representative. Also, you may visit our web site for more information.
The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD.
All brand, product and service, and trademark names are the property of their registered
owners.
The editorial use of these names is for identification as well as to the benefit of the
owners, with no intention of infringement.
CIPHERLAB CO., LTD.
Website: http://www.cipherlab.com

Version
Date
Notes
1.02 Jan. 10, 2018 Modified: Models of 22 Series included
1.01 Oct. 12, 2017 Modified: Screenshots and descriptions updated
1.00 Mar. 28, 2017 Initial release
RELEASE NOTES

CONTENTS
RELEASE NOTES
.................................................................................................................... - 3 -
INTRODUCTION
........................................................................................................................ 1
System Requirements................................................................................................................2
Using ScanMaster Web..............................................................................................................3
Command Menu ......................................................................................................................3

1
ScanMaster Web, the web-based application having the same functionality as the desktop
version, is designed with client-server architecture that makes it easier to configure
CipherLab barcode scanners via accessing CipherLab’s web site. It provides two ways for
users to configure the scanners – (1) send the settings from your computer to the
scanners by direct communication, or (2) generate and print out the setup barcodes for
the scanners to read anytime anywhere to configure itself or restore the defaults.
This user guide contains information on using ScanMaster Web. We recommend that you
read it thoroughly before use and keep it at hand for quick reference.
Thank you for choosing CipherLab products!
INTRODUCTION

2
ScanMaster Web User Guide
SYSTEM REQUIREMENTS
As ScanMaster Web can be run in a web browser, users could use platforms as follows:
Windows
Mac
Android
iOS
Windows Mac Android iOS
UI
Configuration √√√√
Setup Barcode
Generation √√√√
Save/Load
Setting File √√√
Read/Write
Scanner Setting
via Virtual COM
√

3
Introduction
USING SCANMASTER WEB
To access ScanMaster Web, please type http://scanmaster.cipherlab.com/ into the
address bar of your browser. Once on the ScanMaster web page, click any of the scanner
pictures to proceed with the configuration. Or click Open Setting File to locate and open
an existing configuration file.
COMMAND MENU
After selecting a specific model, you’ll see a command menu displayed on the left-hand
side.

4
ScanMaster Web User Guide
BARCODE GENERATION
After you’ve changed the settings, click this command to generate setup barcodes for
printing. For 2D scanners, a 2D Barcode option also presents.
1D Setting Barcodes Generation
2D Setting Barcodes Generation
Title: Users can enter up to 50 characters to give the title of the setup barcodes.
Note: Enter up to 50 characters to note the purpose of the setup barcodes.
Print: Click the Print button to print the setup barcodes which differ from default settings
(as the picture illustrated below).

5
Introduction
Show Caption No.: Enable to show the caption of each setup barcode.
Show Sequence No.: Enable to label each setup barcode with a number to clarify the
steps.
Barcode Size: Drag the scroll bar to adjust the barcode size with each increment of 100
in percentage Up to 300%.
Barcode Spacing: Drag the scroll bar to adjust the barcode spacing with each increment
of 100 in percentage up to 500%.
Note: With an existing setting file opened, a dialog will appear when you click the “1D
Barcode” or “2D Barcode” button.
Click Default Setting to display the loaded setting barcodes which have been changed by
comparing them with default settings.
Click Opened Setting to display the loaded setting barcodes which have been changed by
comparing them with the originally loaded settings.

6
ScanMaster Web User Guide
OPERATION PANEL
The Operation Panel includes Open Setting, Save Setting, and COM Agent commands.
OPEN SETTING
Click it to locate and open an existing setting file.
SAVE SETTING
Click it to save the current settings to a setting file. Users can specify the file name in the
File Name text field.