CipherLab CP60 User manual

Windows Embedded Handheld 6.5
CP60 / CP60G
Version 0.5

COPYRIGHT
Copyright © 2012 CIPHERLAB CO., LTD.
All rights reserved
The information contained in this document, including all pictures, illustrations and software,
is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is
protected by copyright laws and international copyright treaties, as well as other intellectual
property laws and treaties, with all rights reserved.
In no event and by no part shall this document be reproduced, stored in a retrieval system,
or transmitted in any form or by any means including but not limited to electronic,
mechanical, photocopying, and recording without the prior written consent of CIPHERLAB
CO., LTD. Any reverse engineering of software is also prohibited.
DISCLAIMER
The information herein is subject to change without notice. The information and the
intellectual property herein are confidential between you and CIPHERLAB CO., LTD. and
remain the exclusive property of CIPHERLAB CO., LTD. and its respective legal owners.
Should you find any problems in this document, please report them to CIPHERLAB in writing.
CIPHERLAB does not warrant this document is error-free.
TRADEMARK RECOGNITION
CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. Windows Embedded
Handheld is a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries. All other brands, products and services, and trademark
names are the property of their registered owners. The editorial use of these names is for
identification as well as to the benefit of the owners, with no intention of infringement.
CONTACT
For product consultancy and technical support, please contact CIPHERLAB’s sales
representative in your local area. You may also visit CIPHERLAB web site for more
information.
CIPHERLAB CO., LTD.
Website: http://www.cipherlab.com
PREFACE

SAFETY NOTICES
FOR HAND-HELD PRODUCT WITH RF FUNCTIONS
CP60 serial handheld equipment uses wireless radios that have been designed and
manufactured to meet safety requirements for limiting exposure to radio waves. When used
in accordance with the instructions set forth in this manual, the equipment has been
independently verified to not exceed the emission limits for safe exposure to radio
frequency (RF) energy as specified by EN50360 of EEC.
These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organization through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for all wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR; the SAR limit set by CE is 2.0W/Kg.
For trunk, the SAR value of CP60 serial body is: 1.028W/Kg
EEC: MAX 1.35 W/Kg (CP60G)
FOR PRODUCT WITH LASER
CAUTION
This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not
stare into beam.

SAFETY PRECAUTIONS
RISK OF EXPLOSION: IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The use of any batteries or charging devices, which are not originally sold or
manufactured by CipherLab, will void your warranty and may cause damage to human
body or the product itself.
DO NOT disassemble, incinerate or short circuit the battery.
DO NOT expose the scanner or the battery to any flammable sources.
For green-environment issue, it's important that batteries should be recycled in a proper
way.
Under no circumstances, internal components are self-serviceable.
The charging and communication cradle uses an AC power adapter. A socket outlet shall
be installed near the equipment and shall be easily accessible. Make sure there is stable
power supply for the mobile computer or its peripherals to operate properly.
CARE & MAINTENANCE
This mobile computer is intended for industrial use. The mobile computer is rated IP65,
however, the mobile computer can get damaged when being exposed to extreme
temperatures or soaked wet.
When the enclosure of the mobile computer gets dirty, use a clean and wet cloth to wipe
off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.
For a liquid crystal display (LCD) or touchscreen, use a clean, non-abrasive, lint-free
cloth to wipe dust off the screen. DO NOT contact the surface with any pointed or sharp
object.
If you want to put away the mobile computer for a period of time, download the
collected data to a host computer, and then take out the battery pack. Store the mobile
computer and battery pack separately.
When the mobile computer resumes its work, it takes some time for the main and
backup batteries to become fully charged.
If you shall find the mobile computer malfunctioning, write down the specific scenario
and consult the sales representative in your local area.

DECLARATION OF CONFORMITY
Manufacture
r
European informatio
n
CIPHERLAB Co., Ltd. CipherLab GmbH
12F., 333, Dunhua S. Rd., Sec. 2 Willicher Damm 145
Taipei, Taiwan 106, R.O.C. 41066 Mönchengladbach, Germany
Tel: [phone] Tel: [phone]
http://www.cipherlab.com http://www.cipherlab.de
Type of Equipment
Mobile Computer
Model(s) Declared
CP60, CP60G
Initial Year of Manufacture 2012
Reference to the specification under which conformity is declared in accordance with Directive-
2004/108/EC, 95/5/EC
EN 300 328 V1.7.1:2006 EN 300 440-1 V1.6.1:2010
EN 300 440-2 V1.4.1:2010 EN 301 489-1 V1.8.1:2008
EN 301 489-17 V2.1.1:2009 EN 301 489-24 V1.5.1:2010
EN 301 489-3 V1.4.1:2002 EN 301 489-7 V1.3.1:2005
EN 301 511 V9.0.2:2003 EN 301 908-1 V5.2.1:2011
EN 301 908-2 V3.2.1:2007 EN 50360:2001
EN 62209-1:2006 EN 62209-2:2010
EN 62311:2008 EN 62479:2010
The manufacturer also declares the conformity of above mentioned product with the actual required
safety standards in accordance with Directive 2006/95/EC
EN 60950-1Κ2006+A11:2009
Safety for information technology equipment including electrical business equipment
I the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
Representative:
Signature
Full Name Herbie Jiang
Title Assistant Manager
[email protected]
http://www.cipherlab.com

Version Date Notes
0.5 20th Sep 2012 Draft version
RELEASE NOTES

CP60 Mobile Computer Reference Manual
CONTENTS
PREFACE ...............................................................................................- 2 -
Copyright............................................................................................ - 2 -
Disclaimer........................................................................................... - 2 -
Trademark Recognition ........................................................................... - 2 -
Contact.............................................................................................. - 2 -
Safety Notices...................................................................................... - 3 -
For Hand-held Product with RF Functions ................................................. - 3 -
For Product with Laser ........................................................................ - 3 -
Safety Precautions................................................................................. - 4 -
Care & Maintenance............................................................................... - 4 -
Declaration of Conformity ....................................................................... - 5 -
RELEASE NOTES.......................................................................................- 6 -
INTRODUCTION........................................................................................... 1
About This Document .................................................................................1
Features.................................................................................................2
Inside the Package ....................................................................................2
Accessories .............................................................................................2
USE MOBILE COMPUTER ................................................................................ 3
1.1. Take A Tour ...........................................................................4
1.1.1. Overview ..............................................................................4
1.1.2. Inside Battery Chamber .............................................................5
1.1.3. Before Initial Use ....................................................................5
1.2. Power On Mobile Computer ........................................................6
1.3. Notifications ..........................................................................7
1.4. Battery.................................................................................9
1.4.1. Main Battery Setup ..................................................................9
1.4.2. Charge Batteries ................................................................... 12
1.4.3. Monitor Battery Level ............................................................. 14
1.4.4. Power Management................................................................ 17
1.4.5. Optimize Battery Life ............................................................. 18
1.5. Text Input ........................................................................... 19
1.5.1. Physical Keypad .................................................................... 19
1.5.2. Onscreen Keyboard ................................................................ 28
1.5.3. Edit Text ............................................................................ 32
1.6. Touch Control ...................................................................... 34
1.6.1. Use Touchscreen ................................................................... 34
1.6.2. Adjust Backlight.................................................................... 34
1.6.3. Calibration .......................................................................... 35
1.7. Memory .............................................................................. 37
1.7.1. Data Loss Caution .................................................................. 37
1.7.2. Check Storage ...................................................................... 37
1.7.3. Insert SD Card ...................................................................... 40

CP60 Mobile Computer Reference Manual
1.8. Direct Data Connection ........................................................... 41
1.8.1. Use Cable............................................................................ 41
1.8.2. Use Cradle................................................... ᙑᎄ!ࡸآࡳᆠ஼᧘Ζ
1.8.3. Syncing Tools ....................................................................... 42
1.8.4. Sync Partnership ................................................................... 42
1.8.5. 1st USB Sync ......................................................................... 42
1.8.6. Disconnect USB ActiveSync ....................................................... 45
1.8.7. ActiveSync Actions to Take....................................................... 46
1.9. Audio Playback ..................................................................... 52
1.9.1. Volume Control..................................................................... 52
CAMERA ..................................................................................................54
2.1. Launch Camera ..................................................................... 55
2.1.1. Camera Screen ..................................................................... 55
2.2. Take Pictures ....................................................................... 56
2.2.1. Camera Settings .................................................................... 56
2.3. Launch Video Camera ............................................................. 59
2.3.1. Video Camera Screen.............................................................. 59
2.4. Shoot Videos ........................................................................ 60
2.4.1. Video Camera Settings ............................................................ 60
2.5. Pictures & Videos .................................................................. 63
OPERATING SYSTEM....................................................................................66
3.1. 1st Startup ........................................................................... 67
3.2. Today Screen ....................................................................... 68
3.2.1. Customize Today Screen .......................................................... 69
3.2.2. Return to Today Screen ........................................................... 69
3.3. Start Screen......................................................................... 70
3.3.1. Return to Start screen ............................................................ 71
3.3.2. Title Bar ............................................................................. 71
3.3.3. Manage Notifications .............................................................. 73
3.3.4. Customize Start Screen ........................................................... 75
3.3.5. Start Screen Icons.................................................................. 78
3.4. Suspend & Reset Mobile Computer.............................................. 80
3.4.1. Suspend Mobile Computer ........................................................ 80
3.4.2. Wake up Mobile Computer........................................................ 81
3.4.3. Reset Mobile Computer ........................................................... 81
3.5. Set Screen Lock .................................................................... 83
3.5.1. Unlock Screen ...................................................................... 83
3.6. Work with Menus ................................................................... 84
3.6.1. Option Menus ....................................................................... 84
3.6.2. Context Menus...................................................................... 85
3.7. Manage Applications............................................................... 86
3.7.1. Task Manager ....................................................................... 86
RADIOS....................................................................................................93
4.1. Access Cellular WAN............................................................... 93
4.1.1. Status Icons ................................................. ᙑᎄ!ࡸآࡳᆠ஼᧘Ζ
4.1.2. Check What Network You’re Using.............................................. 93

CP60 Mobile Computer Reference Manual
4.1.3. Enable/Disalbe Mobile Data ...................................................... 94
4.1.4. Use Only 2G Networks............................................................. 94
4.1.5. Cellular Data Setup ................................................................ 95
4.1.6. Edit & Add Access Points ......................................................... 96
4.1.7. USB Internet Sharing .............................................................. 97
4.2. Use Wi-Fi ............................................................................ 99
4.2.1. Status Icons ......................................................................... 99
4.2.2. Enable/Disable Wi-Fi .............................................................. 99
4.2.3. Wi-Fi Connection Setup ..........................................................100
4.2.4. Connect Another Wi-Fi network ................................................104
4.2.5. Edit Wi-Fi Networks ..............................................................104
4.2.6. Forget Wi-Fi Netowrks ...........................................................104
4.2.7. Receive notifications of Available networks..................................104
4.2.8. Add Wi-Fi Networks...............................................................105
4.2.9. Connect by Static IP ..............................................................106
4.2.10. Advanced Wi-Fi Settings .........................................................107
4.3. Use Bluetooth......................................................................108
4.3.1. Status Icons ........................................................................108
4.3.2. Change Bluetooth name .........................................................108
4.3.3. Expose Mobile computer .........................................................109
4.3.4. Turn on/off Bluetooth............................................................111
4.3.5. Pair & Connect Bluetooth devices..............................................111
4.3.6. Disconnect Bluetooth Devices...................................................113
4.3.7. Unpair Bluetooth Devices ........................................................114
4.3.8. Reconnect Bluetooth devices ...................................................114
4.3.9. Edit Bluetooth Features to Use .................................................114
4.3.10. Bluetooth File Exchange .........................................................115
4.3.11. Bluetooth ActiveSync.............................................................117
4.3.12. Bluetooth Internet Sharing ......................................................118
4.3.13. Bluetooth Pass-through Networking............................................119
4.4. Connect to Virtual Private Networks ..........................................120
4.4.1. VPN Connection Setup ...........................................................120
4.4.2. Connect VPN .......................................................................122
4.4.3. Disconnect VPN....................................................................123
4.4.4. Edit a VPN ..........................................................................123
4.4.5. Delete a VPN.......................................................................123
4.5. Install Secure Certificates .......................................................125
4.5.1. Supported Certificate Formats .................................................125
4.5.2. View Secure Certificates.........................................................125
4.5.3. Install secure Certificates .......................................................125
4.6. Location Discovery................................................................127
4.6.1. Launch GPS.........................................................................127
4.6.2. Use GPS.............................................................................128
PHONE .................................................................................................. 129
5.1. About Phone ................................................ ᙑᎄ!ࡸآࡳᆠ஼᧘Ζ
5.2. SIM Card ............................................................................130
5.2.1. Assemble SIM Card ................................................................130
5.3. Status Icons ........................................................................130

CP60 Mobile Computer Reference Manual
SPECIFICATIONS....................................................................................... 133
Platform, Processor & Memory ...................................................................133
Communications & Data Capture ................................................................133
Electrical Characteristics..........................................................................134
Physical Characteristics ...........................................................................135
Environmental Characteristics....................................................................136
Programming Support ..............................................................................136
Accessories ..........................................................................................137

1
Thank you for choosing CipherLab products. CipherLab welcomes another Windows
Embedded by introducing CP60 Series Mobile Computer. Powered by Windows Embedded
Handheld 6.5, the mobile computer delivers better user experience and promises enterprise
mobile computing.
The mobile computer has transflective LCD to hold up the readability in a wide range of light
conditions, courtesy of the supplementary backlight enabled by a built-in ambient light
sensor. Also on board is a G-sensor to save power according to the mobile computer’s
motion and posture. G-sensor also enables screen orientation when the device is posed
sideways or upright. Furthermore, the mobile computer has integrated a built-in e-compass
and gyroscope, both of which provide useful functions in navigation.
The series sports satisfactory data connections by integrating a communication port for
direct data exchange. For wireless data connections it hosts each Bluetooth and
802.11a/b/g/n module while a HSPA+ module (CP60G only) is provided on option.
Dedicated to data capture, the mobile computer has essential 1D (laser) reader or 2D
imager. A high-specced 5 mega-pixel camera also comes inside to take pictures and shoot
videos to deliver better documentation for users.
Rated with IP65/67, the rugged CP60 Series are light-weighted and easy to cradle in your
hand, and will be your good help on field works.
ABOUT THIS DOCUMENT
This guide distills the information about CP60 Series Mobile Computer. Subjects discussed
include the mobile computer’s physical features, platform basics, software and applications,
and part of the accessories to boost the mobile computer’s performance.
We recommend that you keep one copy of this manual at hand for the quick reference for
necessary maintenance.
CP60 Series include CP60 and CP60G,
CP60 : Radio include WLAN ( a/b/g/n), Bluetooth (2.1+EDR), GPS
CP60G : Radio include WWAN (HSPA+), WLAN ( a/b/g/n), Bluetooth (2.1+EDR),
GPS
INTRODUCTION

2
CP60 Mobile Computer Reference Manual
FEATURES
Rugged yet smoothened outlined, with hand strap for secure hold
IP65/67-rated tough form to survive drop, shock, heat, cold, and impervious to
moisture/dust.
Windows Embedded Handheld 6.5 OS, TI DM3730 1GHz CPU
512MB SDRAM to run application programs
4GB NAND flash to store OS, applications, settings and so on.
Storage expansion: Up to 32GB MicroSDHC.
OS upgradable through USB connection
Sunlight-readable screen to enhance the viewability of outdoor use.
Ambient light sensor to enable supplementary backlight for LCD and keypad.
G-sensor for power management and screen orientation.
Gyroscope sensor and E-compass for direction sensing
Proximity sensor for disabling touch screen action during calls
2 symmetric side-triggers for ambidextrous scanning
Total data solution — supporting Bluetooth, 802.11a/b/g/n and HSPA+ (CP60G only)
Built-in GPS receiver to deliver location discovery
5 mega-pixel camera for taking pictures and shooting videos.
C++ and .Net programming support
INSIDE THE PACKAGE
The mobile computer ships with the following items. Save the box and packaging material
in case of future need to store or deliver the mobile computer.
Mobile Computer
Rechargeable Li-ion battery pack (standard/high capacity)
Stylus
Screen protector
Hand strap
Product CD
Quick Start Guide
ACCESSORIES
Optional accessories to enhance the mobile computer’s performance:
Pistol Grip
Snap-on Charging and Communication Cable
Charging & Communication Cradle
Belt Holster

3
Before the mobile computer takes part in your work, get to know it first. This chapter combs
the basic features of the mobile computer including the power supply, memory, and the
units that bridge users with the mobile computer. This chapter helps you set the mobile
computer to work at the earliest.
1. IN THIS CHAPTER
1.1 Take A Tour ................................................................ 4
1.2 Power On.................................................................... 6
1.3 Notifications................................................................ 7
1.4 Battery....................................................................... 9
1.5 Text Input ................................................................ 19
1.6 Touch Control............................................................ 34
1.7 Memory.................................................................... 37
1.8 Direct Data Connection ............................................... 41
1.9 Audio Playback .......................................................... 52
Chapter 1
USE MOBILE COMPUTER

4
CP60 Mobile Computer Reference Manual
2.1. TAKE A TOUR
This section shows the major components on the mobile computer and inside battery
chamber. You will also learn how to power on/off the mobile computer and how the mobile
computer gives information about its status.
2.1.1. OVERVIEW
Figure 1: Overview
No. Description No. Description
1Receiver 2Sensors (proximity sensor & light sensor)
3Status LEDs 4Touchscreen (QVGA)
5 Scan key 6 Reset button (recessed in keypad)
7Power button 8 Keypad
9 Microphone 10 Charging and communication port
11 Side trigger (user-definable) 12 Camera shutter key
13 Scan window 14 Stylus (with attaching cord)
15 Camera 16 Camera flash
17 Speaker 18 Handstrap
19 Battery door 20 Battery door latch
21 Side trigger (user-definable) 22 Volume rocker

5
Chapter 1 Use Mobile Compute
r
2.1.2. INSIDE BATTERY CHAMBER
Inside the battery chamber of the mobile computer are the sockets for SIM card and storage
card. Each is equipped with a hinged cover.
Figure 2: Inside Battery Chamber
2.1.3. BEFORE INITIAL USE
Prior to using the mobile computer for the first time, it is recommended to apply the
protective film over the LCD. This will prevent scratching the touchscreen during daily usage,
and also help enhance the durability of the touchscreen.
To apply the LCD protective film:
1) Upon delivery, the touchscreen of the mobile computer is covered with a thin
transparent film. Peel off and discard this film.
2) Wipe the touchscreen with a clean, non-abrasive, lint-free cloth.
3) Carefully apply the LCD protective film to the touchscreen by aligning its edges with the
edges of the touchscreen. Make sure the film adheres tightly to the surface.
The mobile computer is then ready for usage.
SD card slot
SIM card slot
Batter
y
chamber

6
CP60 Mobile Computer Reference Manual
2.2. POWER ON MOBILE COMPUTER
To power on the mobile computer, press the Power button sitting at the upper right of
the keypad.
This Power button is also a suspend button. Press without holding this button to suspend the
mobile computer when you are not actively using it. Press it again to wake the mobile
computer from suspension. See Suspend Mobile Computer for details.

7
Chapter 1 Use Mobile Compute
r
2.3. NOTIFICATIONS
The mobile computer features visible, audible, and tactile feedback to draw users’ prompt
awareness of the mobile computer’s contiguous events such as barcode reading,
wireless/mobile data connections, and battery charging.
STATUS LED
Three LED lights are located on the upper-right corner of the mobile computer. Their
functions are:
Matter LED Color Action Description
Battery
Charging
(Right)
Green,
Orange, Red
Green, solid Battery is nearly fully charged (battery
level>95%).
Orange, solid
Battery is charging, and battery level is
sufficient for the mobile computer to
power on.
Red, solid Battery is charging, but battery level is too
low for the mobile computer to power on.
Red, slow blinking for 3
times
Battery charging error (battery failure).
Replace battery with another one.
Red, fast blinking
continuously
Charging error that may be caused by
temperature dropping below 0°C or
exceeding 35°C. See also Charge
Batteries.
Scanning
Good Read
(Middle)
Green On for less than 1
second, then off
Indicates good reading results of the
scanned barcode.
Enable/disable this notification with the
CipherLab utility Reader Config.
Radios
(Left) Blue Blinking Wi-Fi, Bluetooth or mobile data in use.
LED light is also programmable. See the API library that is readied for your reference.
SPEAKER
The mobile computer has a speaker on the back for audio signaling, audio playback, and
phone ringtones.
The speaker sounds for system events, application warnings, onscreen items selections and
stroke on physical keypad. In noisy environment, the speaker remains efficacious with the
help of a headset. To control sound volume, see Volume Control.
The speaker also sounds for good barcode reading, which can be enabled/disabled by
CipherLab’s Reader Config.
VIBRATOR
The mobile computer owes the tactile feedback to the vibrator built inside. Vibration
delivered to the mobile computer alerts users of its currents status.
Working based on user’s sense, the vibrator is particularly helpful when the mobile
computer is serving in noisy environment.

8
CP60 Mobile Computer Reference Manual
Same as the speaker and LED light, the vibrator works for good barcode reading.
CipherLab’s utility Reader Config enables users to turn the vibration on/off and decides the
duration.
The vibrator is also programmable. See the API library that is provided for your reference.

9
Chapter 1 Use Mobile Compute
r
2.4. BATTERY
The mobile computer is fed by two batteries, main battery pack and backup battery. The
main battery is removable and replaceable from battery chamber while the backup battery
is mounted on the main board inside the mobile computer.
When the mobile computer is shipped, the main battery is stored in a package separated
from the mobile computer, which keeps it in good condition for future use.
MAIN BATTERY
The main battery is a Li-ion battery pack that comes in two sizes, a standard 3.7V/3600mAh
pack and an extended 3.7V/4400mAh pack. Both types will take around 4 hours to charge
to full. The working time of the mobile computer varies by its working states. Under normal
operation, it works for at least 12 hours. An icon on Title Bar helps monitor main battery
level. See Main Battery Level.
See also Main Battery Setup for the assembly.
BACKUP BATTERY
The backup battery settles on the main board inside the mobile computer. It is a 15 mAh
rechargeable Li-ion battery. When main battery is absent or depleted, backup battery takes
over to feed the mobile computer. Without main battery, a fully charged backup battery
retains the data in the DRAM and holds the system in suspension for 30 minutes(as long as
wireless modules are inactive).
The backup battery is rechargeable by the external power (through power adapter) or main
battery pack. It takes about ˈ8 hours to charge it to full. An icon on the Title Bar makes
it observant that backup battery gets low. See also Backup Battery Level.
2.4.1. MAIN BATTERY SETUP
To secure main battery in place, the battery door is equipped with two latches, one on each
side.
Figure 3: Battery Door Latches
Battery door latches

10
CP60 Mobile Computer Reference Manual
To install main battery pack, follow through the steps below by referencing to the
illustrations:
Figure 4: Main Battery Setup