CipherLab CP60G User manual

Windows Embedded Compact 6.0
CP60 / CP60G (CE)
Version 1.01

COPYRIGHT
Copyright © 2014 CIPHERLAB CO., LTD.
All rights reserved
The information contained in this document, including all pictures, illustrations and software,
is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is
protected by copyright laws and international copyright treaties, as well as other intellectual
property laws and treaties, with all rights reserved.
In no event and by no part shall this document be reproduced, stored in a retrieval system,
or transmitted in any form or by any means including but not limited to electronic,
mechanical, photocopying, and recording without the prior written consent of CIPHERLAB
CO., LTD. Any reverse engineering of software is also prohibited.
DISCLAIMER
The information herein is subject to change without notice. The information and the
intellectual property herein are confidential between you and CIPHERLAB CO., LTD. and
remain the exclusive property of CIPHERLAB CO., LTD. and its respective legal owners.
Should you find any problems in this document, please report them to CIPHERLAB in writing.
CIPHERLAB does not warrant this document is error-free.
TRADEMARK RECOGNITION
CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. Windows Embedded
Compact (Windows CE) is a registered trademark or trademark of Microsoft Corporation in
the United States and/or other countries. All other brands, products and services, and
trademark names are the property of their registered owners. The editorial use of these
names is for identification as well as to the benefit of the owners, with no intention of
infringement.
CONTACT
For product consultancy and technical support, please contact CIPHERLAB’s sales
representative in your local area. You may also visit CIPHERLAB web site for more
information.
CIPHERLAB CO., LTD.
Website: http://www.CipherLab.com
PREFACE

FOR UNITED STATES
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
SAFETY NOTICES
RADIO WAVE EXPOSURE AND SPECIFIC ABSOR PTION RATE (SAR) INFORMATION
This mobile computer model CP60G has been designed to comply with applicable safety
requirements for exposure to radio waves. These requirements are based on scientific
guidelines that include safety margins designed to assure the safety of all persons,
regardless of age and health.
The radio wave exposure guidelines employ a unit of measurement known as the Specific
Absorption Rate, or SAR. Tests for SAR are conducted using standardized methods with the
phone transmitting at its highest certified power level in all used frequency bands.
While there may be differences between the SAR levels of various phone models, they are
all designed to meet the relevant guidelines for exposure to radio waves.
SAR data information for residents in countries that have adopted the SAR limit
recommended by the International Commission of Non-Ionizing Radiation Protection
(ICNIRP), which is 2 W/kg averaged over ten (10) gram of tissue (for example European
Union, Brazil and Australia):
The highest SAR value for this model phone when tested by CIPHERLAB for use at the body
is 1.35 W/kg (10g).

FOR UNITED STATES
THESE PRODUCT MODELS HAVE BEEN CERTIFIED IN COMPLIANCE WITH THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
The CP60 series mobile computer has been designed to comply with applicable safety
requirements for exposure to radio waves. Your mobile computer is a radio transmitter and
receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy
set by governmental authorities. These limits establish permitted levels of RF energy for the
general population. The guidelines are based on standards that were developed by
international scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a safety margin designed to assure the safety of all
individuals, regardless of age and health.
The radio wave exposure guidelines employ a unit of measurement known as the Specific
Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the
product transmitting at its highest certified power level in all used frequency bands. While
there may be differences between the SAR levels of various product models, they are all
designed to meet the relevant guidelines for exposure to radio waves.
The highest reported SAR values for body-worn accessory and simultaneous transmission
are 0.76W/kg, and 1.27W/kg respectively for CP60G. The highest reported SAR values for
body-worn operation are 1.03W/Kg for CP60. For body-worn operation, the product has
been tested when positioned a minimum of 15 mm from the body without any metal parts
in the vicinity of the product.
Before a WWAN model is available for sale to the public in the US, it must be tested and
certified by the Federal Communications Commission (FCC) that it does not exceed the limit
established by the government-adopted requirement for safe exposure*. The tests are
performed in positions and locations (i.e., by the ear and worn on the body) as required by
the FCC for each model. The FCC has granted an Equipment Authorization for this phone
model with all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. While there may be differences between the SAR levels of various phones, all
mobile phones granted an FCC equipment authorization meet the government requirement
for safe exposure. SAR information on this phone model is on file at the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID Q3N-CP60G. Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) website at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6
watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a
margin of safety to give additional protection for the public and to account for any
variations in measurements.
FOR PRODUCT WITH LASER
CAUTION
This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not
stare into beam.

SAFETY PRECAUTIONS
RISK OF EXPLOSION: IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The use of any batteries or charging devices, which are not originally sold or
manufactured by CipherLab, will void your warranty and may cause damage to human
body or the product itself.
DO NOT disassemble, incinerate or short circuit the battery.
DO NOT expose the scanner or the battery to any flammable sources.
For green-environment issue, it's important that batteries should be recycled in a proper
way.
Under no circumstances, internal components are self-serviceable.
The charging and communication cradle uses an AC power adapter. A socket outlet shall
be installed near the equipment and shall be easily accessible. Make sure there is stable
power supply for the mobile computer or its peripherals to operate properly.
CARE & MAINTENANCE
This mobile computer is intended for industrial use. The mobile computer is rated
IP65/67, however, the mobile computer can get damaged when being exposed to
extreme temperatures or soaked wet.
When the enclosure of the mobile computer gets dirty, use a clean and wet cloth to wipe
off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.
For a liquid crystal display (LCD) or touchscreen, use a clean, non-abrasive, lint-free
cloth to wipe dust off the screen. DO NOT contact the surface with any pointed or sharp
object.
If you want to put away the mobile computer for a period of time, download the
collected data to a host computer, and then take out the battery pack. Store the mobile
computer and battery pack separately.
When the mobile computer resumes its work, it takes some time for the main and
backup batteries to become fully charged.
If you shall find the mobile computer malfunctioning, write down the specific scenario
and consult the sales representative in your local area.
Keep the mobile computer away from any magnets and magnetic fields to prevent the
laser engine from malfunctioning.

DECLARATION OF CONFORMITY

Version Date Notes
1.01 Aug 22, 2014 Replace Declaration of Conformity
Replace screenshots to match latest OS version
Modify notes for swapping main battery in 1.2.1 Power Menu, 1.4.1
Main Battery Setup, and 1.4.2 Charge Batteries - Replace Main
Battery Pack
Revise 2D scan mode options to Laser, Presentation Mode and Auto
Aim in 2.1.2 General Settings – Scanner Preferences
Add 5.1 Access Cellular WAN
Add GPRS Manager to 7.2 Control Panel
Add description in 7.3 Connection Settings
1.00 Oct 18, 2013 Initial release
RELEASE NOTES

CONTENTS
PREFACE ...............................................................................................- 2 -
Copyright............................................................................................- 2 -
Disclaimer...........................................................................................- 2 -
Trademark Recognition...........................................................................- 2 -
Contact..............................................................................................- 2 -
For United States..................................................................................- 3 -
Safety Notices......................................................................................- 3 -
Radio wave exposure and Specific Absor ption Rate (SAR) information...............- 3 -
For United States...............................................................................- 4 -
For Product with Laser........................................................................- 4 -
Safety Precautions.................................................................................- 5 -
Care & Maintenance...............................................................................- 5 -
Declaration of Conformity .......................................................................- 6 -
RELEASE NOTES.......................................................................................- 8 -
INTRODUCTION........................................................................................... 1
About This Document .................................................................................1
Features.................................................................................................2
Inside This Package....................................................................................2
Accessories .............................................................................................2
USE MOBILE COMPUTER................................................................................ 3
1.1. Take a Tour ...........................................................................4
1.1.1. Overview ..............................................................................4
1.1.2. Inside Battery Chamber.............................................................5
1.1.3. Before Initial Use ....................................................................5
1.2. Power on ..............................................................................6
1.2.1. Power Menu...........................................................................6
1.3. Notifications ..........................................................................8
1.4. Battery.................................................................................9
1.4.1. Main Battery Setup ................................................................ 10
1.4.2. Charge Batteries ................................................................... 13
1.4.3. Monitor Battery Level ............................................................. 16
1.4.4. Power Management................................................................ 20
1.5. Keypad............................................................................... 21
1.5.1. Physical keypad .................................................................... 21
1.5.2. On-screen Keyboard ............................................................... 30
1.5.3. Change On-screen Input Method................................................. 35
1.5.4. Edit Text ............................................................................ 36
1.6. Touch Control ...................................................................... 37
1.6.1. Use Touchscreen ................................................................... 37
1.6.2. Screen Orientation................................................................. 37
1.6.3. Adjust Backlight.................................................................... 39
1.6.4. Calibration .......................................................................... 41

1.7. Memory .............................................................................. 42
1.7.1. Data Loss Caution.................................................................. 42
1.7.2. Check Storage ...................................................................... 42
1.7.3. Insert SD Card ...................................................................... 45
1.8. Direct Data Communication...................................................... 46
1.8.1. Use Cable............................................................................ 46
1.8.2. Use Cradle........................................................................... 47
1.8.3. Syncing Tools ....................................................................... 48
1.8.4. Sync Partnership ................................................................... 48
1.8.5. 1st USB Sync ......................................................................... 49
1.8.6. Disconnect USB ActiveSync....................................................... 50
1.8.7. ActiveSync Actions to Take....................................................... 51
1.9. Volume and Audio.................................................................. 56
1.9.1. Audio Playback ..................................................................... 56
1.9.2. Volume Control..................................................................... 56
DATA CAPTURE .........................................................................................59
2.1. Configure Reader .................................................................. 60
2.1.1. Launch Reader Config............................................................. 60
2.1.2. General Settings.................................................................... 61
2.1.3. Symbology........................................................................... 68
2.1.4. Miscellaneous....................................................................... 71
2.1.5. Reader Config Option Menu ...................................................... 72
2.2. Read Printed Barcodes............................................................ 77
CAMERA ..................................................................................................79
3.1. Launch Camera..................................................................... 80
3.1.1. Camera Screen ..................................................................... 80
3.1.2. Camera Toolbar .................................................................... 81
3.2. Take Pictures ....................................................................... 82
3.2.1. Camera Settings.................................................................... 83
3.3. View Pictures ....................................................................... 84
OPERATING SYSTEM....................................................................................85
4.1. Desktop.............................................................................. 86
4.1.1. Taskbar .............................................................................. 87
4.1.2. Start Menu .......................................................................... 88
4.1.3. Customize Desktop and Start Menu ............................................. 89
4.2. Managing Programs ................................................................ 93
4.2.1. Launch Program.................................................................... 93
4.2.2. Switch between Active Tasks .................................................... 94
4.2.3. Exit a Program...................................................................... 94
4.2.4. Install Applications ................................................................ 95
4.3. Suspend & Reset Mobile Computer.............................................. 98
4.3.1. Suspend Mobile Computer ........................................................ 98
4.3.2. Wake Up Mobile Computer ....................................................... 99
4.3.3. Reset Mobile Computer ........................................................... 99
RADIOS.................................................................................................. 101
5.1. Access Cellular WAN..............................................................102
5.1.1. Install SIM Card....................................................................102