Circo Kids Night Table DPCI 249-20-0200 User manual

A
>> assembly instructions
DPCI # 249 - 20 - 0210 (Chocolate)
Circo Kids
Night Stand / Side Table
DPCI # 249 - 20 - 0200 (White)
9267
1

FREE!
WEWILLHELPYOU!
Do not go back to your store!
Missing or Damage Parts? Have Questions about Assembly?
The store where you made this purchase does not stock parts for this item.
If you needs parts (damaged or missing) or have questions about assembly,
please call our toll free support line or email us. All orders normally ship within 24
hours. All Parts and Shipping are FREE!
Toll Free Customer Support 1-800-932-2006
Monday – Friday from 8 am to 5 pm EST.
E-mail: [email protected]om
Order parts anytime or download assembly
instructions through our website at www.tvilum.com
2

tools needed
Congratulations on your latest Target purchase
Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your
room in no time. Good luck - though we're confident you won't need it.
before you begin
Check for damaged or missing parts. Please call 1-855-MYTGTHOME (855-698-4846) for parts and service. Please reference DPCI#1.
249 - 20 - 0200 (White)
249 - 20 - 0210 (Chocolate)
Use the carton as a worksurface to prevent product damage during assembly.2. Sort hardware.3. Gather all tools prior to assembly.4.
3

table of contents
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
2
3
5
6 - 7
8
9 - 26
27
28
29
30
customer service information
introduction
parts list
hardware
how to use the cam lock system
assembly
specification sheet
questionnaire
information sheet
products available
4

ITEM DESCRIPTION QUANTITY
1
1
1
1
1
1
1
1
1
1
2
1
1
right drawer side
left drawer side
drawer back
drawer bottom
back panel
drawer front
left side panel
left spacer
right side panel
right spacer
top / bottom spacer
top panel
shelf
00592
00593
02843
06917
09401
E
F
FA
H
HA
I
L
UF
FA
L
I
I
U
H
09401
HA
00593 02843
00592
06917
E
5

x20
31570
x6
10401
x4
26020
x8
20203
x8
20212
x1
25483
x2
26214
x16
31686
x4
63001
x1
81039
x8
20228
x4
31685
drawer glide screw
small dowel pin drawer knob screw
floor glide
cam bolt large camsystem screw
drawer knob
large dowel pin drawer fastener
hardware
panel clip
small cam
6

x2
41404
x1
88060
hardware
drawer glide
Warning Label
7

CORRECT
NOT
CORRECT
5
180°
123
46
how to use the cam lock system
8

x4
31570
x4
31685
00592
E
00593
small cam
CORRECT NOT
CORRECT
cam bolt
step 1 drawer assembly - insert cams
Screw cam bolts into the drawer front, Cam bolts must be screwed down flush.1. Place the small cams into the large holes on the drawer sides 00592 + 00593,2. so that the arrow is facing the edge of the drawer side.
9

step 2 drawer assembly - attach drawer bottom to back
Press the drawer bottom 06917 (with the finished side up) into the grooves on the drawer back 02843.1. Paper overlays the slot, but it has a slit so drawer bottom inserts well.2.
paper finished side up
02843
06917
10

x8
20228
x1
88060
drawer fastener
step 3 drawer assembly - attach drawer sides
Align holes at back of the drawer sides, 00592 and 00593 with the holes on the1. drawer back 02843. Make sure the groove on the drawer back is facing the inside of
the drawer. Tap drawer fasteners into place with a hammer.
Attach warning label to the inside of the drawer side.2.
00593
06917
02843 00592
finished side up
Warning Label
11

step 4 drawer assembly - attach drawer front
Place the cam bolts that are attached to the drawer front into the holes on the drawer sides.1. Make sure the drawer bottom is completely inserted into the grooves in the drawer front and2. drawer back, then tighten cams.
00593
00592
02843
06917
E
12

x1
81039
x1
25483
drawer knobdrawer knob screw
step 5 drawer assembly - attach drawer knob
Use the drawer knob screw to attach the drawer knob to the drawer front E.1.
00593
02843
00592
06917
E
13

NOT
CORRECT CORRECT
x8
31686
x8
20212
x8
20203
step 6 case assembly - insert dowel pins and cams
Place the large cams into the large holes on I + U, so that the arrow is facing the1. edge of the panel.
Insert large dowel pins into holes on the ends of I.2. Insert small dowel pins into holes on the ends of U.3.
I
x2
U
large cam
large dowel pin
small dowel pin
14

x12
31570
cam bolt
step 7 case assembly - insert cam bolt
Screw cam bolts into the side panels F + H. Cam bolts must be screwed down flush.1.
F
H
15

x4
31686
x4
20203
NOT
CORRECT CORRECT
step 8 case assembly - insert dowel pins and cams
Place the large cams into the large holes on FA and HA, so that the arrow is facing the edge of the panel.1. Insert small dowel pins into small holes on the ends of FA and HA.2.
FA
HA
large cam
small dowel pin
16

x2
41404
x4
26020
front screw location back screw location
front of glide
system screw
drawer gilde
step 9 case assembly - insert drawer glide
Place system screw into the back hole of the drawer glide, then screw it into the hole drilled near the back of the left FA or1. right spacer HA. Move the glide so that the other drilled hole is visible through the slot. Insert a system screw, then tighten.
Note: Oil is on slide for lubrication. Use care in handling, so that lubricant is not transferred to the product.
FA
front
(finished edge)
HA
front
(finished edge)
17

step 10 case assembly - top / bottom spacer, left spacer and side panel
Place the dowels on the end of top / bottom spacer I into the holes of the left spacer FA and left side panel F.1.
Make sure the finished edge is facing toward the front.
Tighten the cams.
II
F
FA
front
(finished edge)
front
(finished edge)
18

step 11 case assembly - attach shelf
Place the dowels on the end of U into the holes of the side panel F.1.
Make sure the finished edge is facing toward the front.
Tighten the cams.
I
I
U
F
FA
front
(finished edge)
19

step 12 case assembly - back panel
Insert back panel 09401 through the slots on the top / bottom spacer I.1.
I
I
U
F
FA
09401
20