Cirrus Screens Harbour 2 User manual

X2
X12
X10
X10
X8 X8
X2
X2
X2
Harbour 2
In Ceiling Tab Tensioned
Projection Screen
RF Remote
Adjusting The Black Drop
We only recommend the experienced AV installer to undertake below procedures:
Downwards
Ensure that the screen is in the CLOSED
Stand in reach of the screen while holding the RF remote.
Press the DOWN button of the RF remote, when the screen goes down about to the desired
position, press the adjustment button.
Press the adjustment button repeatedly until the screen reaches the desired position.
Press the UP button of the RF remote to save the settings.
Upwards
Ensure that the screen is in the OPENED
Stand in reach of the screen while holding the RF remote.
Press the UP button of the RF remote, when the screen goes up about to the desired position,
press the adjustment button.
Press the adjustment button repeatedly until the screen reaches the desired position.
Press the DOWN button of the RF remote to save the settings.
CAUTION: To avoid the bottom bar from going too far into the casing, please follow
the above procedures with strict accordance

=
=